Check For Blank / Empty / Error Cells In Select Case

Aug 3, 2012

I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.

However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.

Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.

As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..

View 2 Replies


ADVERTISEMENT

Prevent #DIV/0 Error In Average When All Cells Are Blank/Empty

May 19, 2008

I'm looking for a function that will display the average of a row of cells, while at the same time not displaying any error messages. It's easy to average cells without blank values, but to combine that with no errors is difficult for me. I saw many ways to do the average, one of which is:

= SUM(A1:E1)/COUNTIF(A1:E1,">0")

That function doesn't work for a row of blank cells (i.e., hidden rows), though. The result is an error message.

I also read about a way to ignore an error in a computation:

=IF(ISERROR(F1),"",F1)

The problem is when I combine those functions I get a blank cell no matter which function I put first, and without regards to cell values or not. The reason I want this to be error-free is that I have to average the "average column" at the bottom of the table, too (i.e., F100).

View 9 Replies View Related

Select Case Error "Case Without Select Case"

Jul 20, 2006

For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....

View 9 Replies View Related

VBA Select Case Error / Procedure Too Large

Aug 1, 2014

I have 30 different cases working well in one module so far. Now I need to add some more cases, but the system doesn't allow me to start defining any new cases under Select - Case, it shows: compile error: procedure too large.

I'm thinking maybe there's a way to combine multiple cases like Case 30, 31, 32 in one statement, and use if, else to define each one?? So the coding won't return the "Procedure Too Large" error? see my original coding as below:

counter = 0
colkey = 0
For Each cont In PriceForm.HaveFrame.Controls
If TypeName(cont) = "CheckBox" Then
counter = counter + 1
check = cont.Value
If check = True Then

[code].....

View 9 Replies View Related

VBA Implementing Select Case Statement - Compile Error

Apr 25, 2013

I'm having problems implementing a Select Case statement. Keep getting case without select case at Case condition2.

Code:
Select Case Condition
Case condition1
If Cells(rsRow, rsCol).Value = "" Then
Cells(rsRow, rsCol) = TextBox2.Value

[Code] .......

View 3 Replies View Related

How To Check If Cell Is Blank But Not Empty

Jun 9, 2014

How can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.

View 8 Replies View Related

VBA Check If A Cell Is Empty - Move 7 Cells Over And Check Again (Loop)

Aug 10, 2012

I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.

Code:
Sub Tester()

Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range

Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)

[Code] ......

View 1 Replies View Related

Select Case, Case Else Copy From Above Cell

Jun 3, 2009

I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.

Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"

Rather then returning "N/A", how could I reference the cell above and just copy it instead?

View 9 Replies View Related

Check The Cells Are Empty

Jun 14, 2009

I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.

View 2 Replies View Related

Check If All Cells In Range Are Empty

Nov 3, 2008

I have an if statement as follows:

If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))

Then

i did a select to make sure it was selecting the whole range I want and it works fine:

Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.

View 9 Replies View Related

Check If Cells Are Empty If So Delete Range?

Jul 25, 2012

im having a little trouble writing a macro to :

check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'

View 2 Replies View Related

Loop Macro To Check If Cells Not Empty

Jun 27, 2014

Column 'N' and 'O' will be used for inputting information and will never be hidden

Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro

Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden

The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )

If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met

The loop should continue checking for these 3 items through row 500

If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"

Upon closing the message box, the file should save and then exit

If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'

In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'

That last part will give the user a tool to see where they might have forgotton to enter data.

View 3 Replies View Related

Check If X Cells Are Empty Before Formula Calculation

Dec 5, 2008

I have a spreadsheet that uses IF(C5>J5,(EDATE(C5,12)),(EDATE(J5,12)))__ IF(J9<D9,(D9-$N$1)) where N1 is current date. If C5 and J5 are empty how do I get it to ignore the formula and just leave the other cells blank?

View 3 Replies View Related

Check For Empty Cells In Non Contiguous Range

Aug 13, 2008

The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.

Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............

The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution

View 3 Replies View Related

Select Non Empty Cells

Oct 25, 2009

How do I select all the NON EMPTY CELLS in a column?

and

How do I select all the NON EMPTY CELLS in a range?

View 4 Replies View Related

Conditional Formatting To Check If Adjacent Cells Are Empty?

Jul 18, 2014

I've got a list and I need to check if the adjacent cells for a column are empty or not, and if both are empty then format to a certain color. I have a solution but don't know how to implement it into a format fit for conditional formatting.

I have this in the new rule section of conditional formatting

=IF(AND(ISBLANK(OFFSET(I4,0,-1)),(ISBLANK(OFFSET(I4,0,1))),(ISBLANK(I4)=FALSE)),TRUE,FALSE)

If conditional formatting would allow it I would simply change I4 to the entire range, I am very much confused as to how to format this cell to work with conditional formatting. (I4 is the first cell in the list)

Something else is that if I change I4 to I5 or something then moves all the highlighted cells around, and to top it off the first few cells which should obviously be highlighted aren't, even though the rest of the cells which should be highlighted are.

View 7 Replies View Related

Delete And Select Empty Cells

Mar 26, 2014

I am trying to delete/select empty cells in Column C.

I tested the code in my work sheet which has close to a million rows. this code for some reason doesnt work. its selecting empty cells from Cell C, that is not working.

When I test it on a new worksheet it worked fine. ?

View 1 Replies View Related

Change Empty Cells To Blank Cells (need To Use Skip Blanks Function)

Mar 8, 2014

I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.

Do you got a fast method to make all the empty cells blank?

View 4 Replies View Related

Replace #VALUE! Error For Blank Cells With Blank Cell

Nov 17, 2008

The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.

=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))

View 9 Replies View Related

Check For & Select Visible Cells

Jun 26, 2008

I have the following code in my VBA

Selection.SpecialCells(xlCellTypeVisible).Select

This throws up error when the selection does not has any visible cells. Is there a way to check the selection for visible cells before executing this command.

View 2 Replies View Related

Select Dynamic Range Based On Non-empty Cells

Aug 7, 2009

I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.

View 2 Replies View Related

Blank / Empty Cells To Not Show 0

Dec 19, 2013

Please see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.

Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.

View 3 Replies View Related

How To Identify Blank / Empty Cells

Aug 14, 2014

What is the best way to track blank/empty range cells?*Have tried 'IsBlank' but it keeps showing "False" (cell range: H7:P7, no value and spaces)

View 3 Replies View Related

How Do I Keep From Printing Blank/Empty Cells

Oct 20, 2008

My work book developes text based on a series of answers. Some areas only apply to certian senarios. How do I keep from printing the 0 value feilds?

View 6 Replies View Related

Unlock Blank/Empty Cells

Jul 4, 2007

Is it possible to unlock Blank or Empty cells within a Range?

" for example; all cells in the range (A1:F10) > 0 .locked = False "

I have some code from something simmilar i have added below:


Sub test_Click()

Dim rngTemp As Range

For Each rngTemp In Range("grey").Cells
If len(rngtemp.value) > 0 Then
LockMatchedCells rngTemp, Range("against")
endif
Next

End Sub

View 9 Replies View Related

Count Blank Empty Cells

Nov 26, 2007

I am looking for a formula to count the number of blank cells between the cell I am in and the first non-blank cell to the left.

View 9 Replies View Related

Check Blank Cells

Jun 4, 2008

I'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":

If cell.Value 0 Then
'Extra coding
Else
End If

View 9 Replies View Related

VBA To Fill Empty Cells Until The 1st Completely Blank Row?

Feb 1, 2014

I am looking for code that fills empty cells found in columns A-F by copying and pasting the value from the cell of the previous row (of the same column) ignoring columns G onwards. The copying/ pasting then should stop when it encounters its first completely blank row.

View 2 Replies View Related

Replace Empty Cells With Blank Space

Jun 23, 2008

I have many sheets in my workbook with many filled or unfilled cells... I want that any cell in my whole workbook should be filled with " " ie a space if it is currently blank (ie don't touch the cells which have some data) and as there are many cells in a sheet .. I don't want to fill them with spaces as the file size will increase... I just want to do this for cells A-1 to AB-200.

What is the way of doing this with a formula or programming ie without macros... (or is macro the only way?) What if I just want to do this to a sheet and not to the whole workbook.

View 10 Replies View Related

Check For Blank Cells In Range

Aug 25, 2007

I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.

The cells datatypes are mixed, some are Integer and some are String.

Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved