I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 RepliesI am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
how to use the offset function to create a dynamic range in Excel 2010. An in-house Excel form I work with spans columns A thru P and has three sections. In Section 2 the user fills in employees who are requesting to work overtime. Section 2 starts row 12 and ends row 61. It's sometimes necessary to add rows to this section. How do I make this section/range dynamic using the offset function?
View 1 Replies View RelatedI am trying to run some code when a worksheet is selected.
I'm doing this using a macro currently (code below), but this requires that i use a quick menu button and i would like to make it a form button and assign a macro to it (so i can distribute the file without everyone having to create a menu button).
I would like to replace (or modify) the code below to select any sheet other than the ones named "a" and "b".
Code:
Sub ImportAlarms()
Dim thisSheet As Worksheet
Dim targetSheet As Worksheet
On Error GoTo failed
Set thisSheet = Application.ActiveSheet
Set targetSheet = Sheets(TARGET_SHEET)
[Code] .......
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1".
I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click()
If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then
Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy
Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone
End If
End Sub
Basically I need a bit of VB to find the last cell in column F with text in it (is it End(xlUp)??) and then apply full borders from that cell up to cell Q5. A test macro tells me the border bit is as follows, so just need defining the range.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.ColorIndex = 0
.TintAndShade = 0
[Code] ......
I know how to do Range("A" & I).Select, but how about if I want columns A thru E instead?
View 7 Replies View RelatedI am doing is setting a variable called eof to the number of rows (with text) and i just want to select columns A1 - G1 and the eof range!
Dim eof As Integer
With Sheets("Coverage Count (%)")
eof = .Range("G65536").End(xlUp).Row
'crashes on the .select
.Range("A1:G1" & eof).Select
Selection.Sort Key1:=Range("G2"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End With
I've done this before and I could have sworn this worked...but i must be missing something.
This one should be easy but I keep running into the same wall.
On every page I have single cell defined name range based on the sheet name & "_startcell"
So on sheet MfgReq I have cell A3 defined as name range "MfgReq_startcell".
I would like to the following:
.clearcontent using the "MfgReq_startcell" as the upper most left cell, all the columns to the right, and all the rows down.
on this sheet it might be 5 columns wide by 4000 row & on another sheet it might be 50 columns wide by 50000 rows.
I am trying to create a command button on my userform that will allow me to print all the records in the worksheet....in other words it should only print the rows with data......
*my worksheet is called "complaintData" - this is hidden and not active sheet.
*I have columns A to J with information, with heading from A1:J1.
*I want to be able to print all the rows with values in column A. (Not all the columns except "A", will have values for every record....some may be blank for some records...
*I want all the columns to fit in in one page with headings (A1:J1) being first row on every new page.....
*page setup should be landscape...
I have tried a few codes from this forum, but not sure where I have goofed up....am still trying learn VBA.....would appreciate if anyone can fix this code for me....cheers
Private Sub cmdPrint_Click()
Sheets("ComplaintData").Visible = False
Dim ws As Worksheet
Set ws = Worksheets("complaintdata")
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
I have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
I need to select data from columns A, B and I for the graph. I have the below code but get an error message. Can anybody help ?
Set cellGR1 = Cells(2, 1)
Set cellGR2 = Cells(K, 2)
Set cellGR3 = Cells(2, 10)
Set cellGR4 = Cells(K, 10)
Charts.Add ....
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
I have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View RelatedI want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
I have a listing with Middle Initials in column D. D also contains dates and Names. I want to remove the Middle Initials only. I need to do this without moving around cells. So a Find:="A", Replacement:="" type of situation. Right now I have 26 two line entries to take care of this, but I know it has to be easier and use less lines. (Trying to consolidate code for a better look).
Here is some of what I have (that works, but is long):
Code:
'
' Replace Middle Initial from Prod Sheet
'
Cells.Replace What:="A", Replacement:="", LookAt:=xlWhole, SearchOrder _
:=xlByRows, MatchCase:=True, SearchFormat:=False, ReplaceFormat:=False
[Code]...
I thought that I might be able to do something like this, but I can't get it to work.
Code:
Dim Alpha as Variant
Alpha = Array("A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z")
For ABet = 1 to Cells(Rows.Count, "D").End(xlUP).Row
If Range(ABet) = Alpha Then Range(ABet) = ""
Next ABet
' or I thought maybe this would work.
Cells.Replace What:=("A", "L", "R", "M") Replacement:="", LookAt:=xlWhole, SearchOrder _ :=xlByRows, MatchCase:=True, SearchFormat:=False, ReplaceFormat:=False
' or I thought maybe this would work with the variables.
If Range("B" & ABet) = Alpha Then Range("A" & ABet) = "" None of them worked though.
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
I care about is the line starting wks4.Cells(Di, 2) = I am trying to sum data from a variable length column in worksheet 3 and place the result in column 4 However, when I hit enter after entering the formula into =SUM() I get
Compile Error:
Expected: list separator or )
[code]
Sub Macro1()
Dim wks3 As Worksheet Dim wks4 As Worksheet
Set wks3 = Worksheets("Sheet3")
[Code].....
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI am using the below code which works perfectly in same sheet. But instead of range a1 and b1 in the same sheet (bold one), i want to use range a1 and b1 of sheet2. Range "Nazim" is named range in sheet1. And this code will be put in sheet1.
View 2 Replies View Relatedwhy this works:
Worksheets("Sheet10"). Range("H9:i9").Select
whereas this does not
Worksheets("Sheet10").Range(Cells(9, 8), Cells(9, 9)).Select
Not sure why this Code is not copying data across to the second worksheet.
The attached file 140404 Need Range.xlsm is an extract showing only the relevant elements of a much larger structure.
Drivers upload a stock record each day onto the Data Input sheet, listing what products and volumes they have loaded.
Because the range of products varies every day, this has to be set as a "dynamic" range on the worksheet.
To create a printable form, I need to copy each Item ID and Quantity from the Data Input sheet into the "Van Load" spreadsheet.
So Data Input D10 copies to Van Load E6 and the quantities from C10 to G6, down one row, repeat, etc. until the last row of variable Data Input range.
Option Explicit
Sub VANRECORD()
Dim lRow As Range, oCell As Range, nRD As Range, ws As Worksheet
Set lRow = ActiveSheet.Range("B" & Range("B65536").End(xlUp).Row)
[Code] .....
I am trying to run a script from a command button on another sheet in the same workbook. all the variables have been defined. I get a "select method of range class failed" message when I run the code. I believe that i am not getting "closed trades" to be the active worksheet.
excerpt of code
'Clear out existing data
iRow = 2
Set wks = ThisWorkbook.Worksheets("Closed Trades")
wks.Activate
lrow = Cells(65536, 1).End(xlUp).Row
Set Rng = wks.Range(Cells(iRow, 1), Cells(lrow, 17)) ' this row errors out
Rng.Clear
Set Rng = Nothing
The idea is to center an image in the middle of a cell where the cell's size is variable. This shall be done for a column of images if a certain cell in the same row contains content different from 0. If not the image shall be invisible.
Sub Center()Dim Position As Integer
Dim Picture As Integer
Picture = 6
For Position = 7 To 320If Sheets("List of Measures").Cells(Position, 2).Value
[Code] ......
Run-time error 1004: Application-defined or object-defined error?
Code:
=SUMPRODUCT(--(_NamedRng1=NamedRng2),$B$49:$F$49)
I am using the above formula in my code with two Named Ranges
Code:
Set Rng3 = Range("_NamedRng1").Offset(1, 0)
=SUMPRODUCT(--(_NamedRng1=NamedRng2),rng3)
[/CODE]
I want to set the range $B$49:$F$49 in my code and I have tried the above, but it does not work.
I want to allow for the fact my end user may insert rows so do not want to use $B$49:$F$49
Subcript Out Of Range Error Coming Now For The Code Which Works For Me Before
Sub WHideRows()
Dim rRange As Range, rCell As Range
Dim strVal As String
Set rRange = Worksheets("WIED PROBLEM WELLS").Range("A11:A110")
For Each rCell In rRange
strVal = rCell(1, 3) & rCell(1, 4) & rCell(1, 5) & rCell(1, 6) & rCell(1, 7) & rCell(1, 9)
rCell.EntireRow.Hidden = strVal = vbNullString
Next rCell
End Sub
i am using the code above to hide the rows which doesn't have any values in all the following Cells 3,4,5,6,7 & 9 or Unhide the rows if there is value in any 1 of the following cells 3,4,5,6,7 & 9 from row number A11 to A110.
The same code works for me before. But now the code is not working. It says below the error message
Run-time error '9':..................
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.