I can I select all non-blank cells (including constants and formulas) in a sheet? I am familiar with SpecialCells(xlCellTypeConstants) and SpecialCells.(xlCellTypeFormulas) but these seem to be mutually exclusive.
Can I do something like: NOT SpecialCells(xlCellTypeBlanks)?
how to get a selective cell range after i apply a filter,
I have it currently that it will copy the data shown but i don't want it to copy if there is no data present?.
ub Ding*****urn()
' Ding*****urn Macro
Sheets("Master").Select
Range("D1:E1").Select
Selection.AutoFilter
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=1, Criteria1:= _
"DINGLES BOURNEMOUTH"
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=2, Criteria1:="MENSWEAR"
Range("A2").Select
[code]....
when i comes to the selection i only want it to copy cells that represent a value within that filter not cells that are blank?
i need a macro that will select all the blank cells in a column.
View 5 Replies View RelatedCan a macro be used to select only blank merged cells on a worksheet? If so, how do I create this macro?
View 6 Replies View RelatedI have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
I have a huge excel file (who doesn't ) and would like to create a macro to select cells between 2 blanc cells in a column. (Then another macro will continue to select all in the table for that specific range and copy-paste to another sheet. But this part is not relevant)
The details
The table will be like below.
So the macro should select between F2:F6. (then another macro will copy F6:A3 and cut-copy this range to another sheet); and when I re-run this macro this time it will copy the range of Model B..
A
B
C
D
E
F
[Code]...
when I select 30,000 Row and 3 Columns then Edit>GoTo>Special>Blanks , Excel gives me MSG : selection is too large
View 2 Replies View RelatedI would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
View 1 Replies View RelatedOk so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I'm trying to select the next blank cell starting from a specific cell (N45) and then add a value from a textbox.
Ive got the following code but it isnt working.
Code:
ThisWorkbook.Sheets("RRHH").Range("N45").End(xlDown).Offset(1).Select
Selection.Value = NameTextBox.Value
I am trying to write a macro to paste some data from one worksheet into another. I need to paste the data into the next blank cell down from the existing data.
I have looked at this thread already
For w/o next error
but cant seem to get it to work.
This is the code I have got so far but it isnt working. any help would be much appreiciated.
'main part of code to copy data left out
Windows("performance tracker.xls").Activate
Sheets("Data").Select
ActiveWindow.SmallScroll Down:=9
Set rngDestination = wsData.Range("A65536").End(xlUp).Offset(1, 0)
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = Format( Date, "dd-mmm")
Sheets(" Total").Select
ActiveWorkbook.Save
I have a spreadsheet for tasks. When I select from a pull down to mark as "Completed", I would like this to cause the cell containing the start date to go Blank.
View 2 Replies View RelatedI need to select all data in columns A:F but the number of row containing data is variable. I need to select only the rows with data.
View 7 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
I've got 12 columns (headed Jan - Dec), each of which contains a combination
of numerical & blank cells. For each row, I want to select the first
non-blank cell and return the column header that it lies in e.g. Row 1, first
non-blank cell is in the Apr column, so I want the text "Apr" to be returned
to another cell.
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code:
Sub Test()
If Selection.Select "" Then
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Else
Range(Selection, Selection.End(xlToRight)).Select
End If
End Sub
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am trying to randomly select 10 data from a table by using index formula. But there are some blank cell in the table so It kept returning 0 in the cell.
problem.xlsx
I have a problem with the following code.
I want to select multiple rows in a very huge spreadsheet. But, when I
use this code, I receive an error: Runtime error 1004, Method ' Range'
of Object '_global' failed. What is wrong? Or maybe there is other
better way to select automatically empty rows in a spreadsheet?
Public Sub delhol()
'
' delhol Macro
'
' Keyboard Shortcut: Ctrl+d
'
Dim k As Variant
Dim rr As String
k = Array(34, 35, 38, 39, 40, 77, 133, 182, 207, 209, 225, 226, 295,
299, 300, 338, 394, 437, 468, 470, 480, 481, 560, _
591, 599, 655, 712, 729, 746, 755, 756, 852, 860, 962, 990, 1005,
1006, 1077, 1081, 1082, 1083, 1114, 1176, _
1217, 1252, 1260, 1261, 1338, 1342, 1343, 1344, 1375, 1381, 1437,
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies View RelatedI am trying to achieve the below objective but getting error message
Objective: select last non blank row and offset to next cell type a message in it
error message: Runtime error 1004 : method 'Range' of Object '_Global' Failed
CODE:
Sub lastRowAll()
myvar = ActiveSheet.UsedRange.SpecialCells(11).Column
myrow = ActiveSheet.UsedRange.SpecialCells(11).Row
Range(myvar, myrow).Offset(0, 1).Value = "Experiments with VBA"
Range(myvar, myrow).Offset(0, 1).Activate
End Sub
Was wondering .. as I can not seem to find the right type of coding.
I am trying to have the file open in the next blank cell on column C, ut at least have 5 lines showing above it as there is Freeze Panes.
Is this possible for excel to do upon opening?