Book, Loaned to, Date
A Tale of 2 Cities, John, 1/1/2010
Oliver Twist, Mary, 2/3/2011
Great Expectations, James, 4/6/2011
Oliver Twist, Greg, 6/2/2010
I want to make it such that, when I input the name of the book, it will tell me the person whom I lent it to last and the date of the transaction. Preferably, this should be done without any assumptions on how the table is ordered. For example:
Book, Loaned to, Date A Tale of 2 Cities, John, 1/1/2010 Oliver Twist, Mary, 2/3/2011 Great Expectations, James, 4/6/2011 Oliver Twist, Greg, 6/2/2010
I want to make it such that, when I input the name of the book, it will tell me the person whom I lent it to last and the date of the transaction. Preferably, this should be done without any assumptions on how the table is ordered. For example:
I have a spreadsheet which has a list of properties with a list of survey dates. The complication is that every property has multiple surveys and these are all on separate lines with the spreadsheet. The number of surveys could also be different depending on the property in question.
What I would like to do is to compile a report which only shows me when the latest particular type of survey (there are five types of survey, I'll call them 1, 2, 3, 4 and 5).
The survey type is shown in column C, the property is shown in column A and the survey date is shown in column F.
know if there is any way of getting a cell produce an X (for example) when it is selected and blank when selected again? Basically a tick the bok response. I know i could use a drop down list but i was hoping for a quicker method as a lot of ticks accross a lot of cells are required. James
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed Disposal Order Latest Decision date for D.O.
I have a user form with some option buttons (1,5,10,etc...) that are used so the user can select a given number of cells they want selected. My last option button is labled Other(optOther) and has a textbox next to it(txtOther).
What I am trying to do is give the user the option to either select one of the given numbers or be able to enter their own number. The data will then be extracted from one worksheet to another. I have all the coding for the optiong buttons with the given numbers, just cant figure the textbox one out.
My data starts on B5, so what i am trying to do is when the user enters number n, i would need data from B5:B(n+4).
I have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
I have a table with different values on different dates. To get the newest value on the lastest date I'm using this formula; =INDEX(F5:K5;MATCH(9,99999999999999E+160;F5:K5)).
However, how I can get the second latest value? In this example I want a formula to to return the value previous price;
Latest observation Latest observation date Previous price previous price change date 01.08.2012 02.08.2012 03.08.2012 04.08.2012 05.08.2012 06.08.2012
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
I've got a software test plan that has test cases w/ individual pull-downs to select result states (All individually color-coded thanks to a macro). If any state is selected other than "Pass" or "Untested", a text entry feild appears two rows beneath the test case for additional notes and information regarding what behavior occurred when the test was done.
I need a way to a.) Automatically select this text field once any state other than "Pass" or "Untested" is selected in the pull-down, and b.) Require text entry in the field before the user can proceed to the next test case. (ideally w/ accompanying custom error message describing what information is required.)
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
I am trying to create a macro using the recorder that will select the latest date in a drop down list. The dates upate each day in the pivot table after the table is earlier refreshed. Using the recorder simply picks the same date each time. I want it to select the latest date. Am using Excel 2010 and have some very limited experience in vba for editing macros.
I have a raw data in one file and then another file contains pivot table linked to the raw data. In the dashboard i need to show last 6 weeks trend which is linked to the pivot table. Currently i am manually unselecting previous week and selecting the latest week.
Ex: This week i select weeks 5, 6, 7, 8, 9, 10 from the pivot for the dashboard. When new data is updated next week, i want to select 6, 7, 8, 9, 10, 11. I cannot delete as i need the historical data.
I am trying to basically search for the last non zero entry in a column and then return a value in the same row as that last non zero entry.
For example:
My first column of the table is time, second column is submission/marking of coursework (denoted by +1 & -1) and the third column is the number of courseworks awaiting to be marked. My aim is to search the third column for the last non zero value then return the time (from first column) that last non zero value appears.
I'm creating a pivot table using visual basic. for 1 of the titles in the column ("Organization") I only need to Select "Telford", "Kaiserslautern" & "Morocco" out of several other options. The code I've got at the moment only tells the pivot table not to show the ones I dont want as per below:
Code: With ActiveSheet.PivotTables("PivotTable2").PivotFields("Organization") .PivotItems("Printers KL").Visible = False .PivotItems("Printers TE").Visible = False .PivotItems("Valls").Visible = False .PivotItems("(blank)").Visible = False End With
Not all of these options are always in there so the macro crashes when it can find 1. Is it possible to de-selct all options then only select the 1's I want rather than the other way round using visual basic?
I've made a macro and spend some time making it work across different sizes of data. The last issue I'm having is after the macro sorted out some data, that it will then delete, it has to select the first row and shift select down before deleting it. However, depending on how the data is sorted, the first row could be 9, could be 10 and so on. See below for my code.
Code: Sub Macro1() Windows("statistik.xls").Activate Range("A8").Select
[Code]....
If the first row in my data set is not one of the 3 criteria ("Personligt ejede virksomheder", "Privat", "Reklamebeskyttet"), then the first row # will be 10 instead of 9. If the first two rows are not one of the 3 criteria, then it would be row 11 and so forth. How do I make my macro take this into consideration?
I have attached the data in an excel file here. I'd like to select (or highlight) the rows (based on names) in the table on sheet1 based on the list provided in sheet 2. I've been struggling with using a formula for this one. The list on sheet 2 may be longer than the table on sheet 1(since there are entries on the list which might not be present in the table column 2), and the reverse may also be true. I would like to select "entire rows" of names in the table that are there on the list on sheet 2, not just the names column in the table. See the desired result on sheet 3.
I have a table in columns C:J, starting in row 7. I have a macro that selects and copies the whole table (after I filter the table) and pastes to another sheet. Recently I've realized that I can only copy/paste C:I or it will mess up my formulas during the process.
This is the code I have right now, which works beautifully for the whole table:
What I need is to know how to copy everything in the table except column J. I can't just copy a certain range cells because the number of rows is variable. There has to be a way to modify the ActiveSheet.ListObjects("Table36") right?
I have a data input sheet on a spreadsheet with a pick list where we can select an option, but I need another 'flat file friendly' option to appear on a second sheet where the data will be pulled from. For example
If on the front sheet Flat Roof Insulation is selected, it needs to return FRI into the other sheet, there are 45 options in the list.
Basically I have been presented with a table (which can't change) and isn't well formatted shown at bottom of page.
Ideally I want to like extract and cross analyise some of the elements in the table to load into a database. Due to the formatting I cannot find a way of doing this which identifies and picks out the relevant bits.
For example; how would I gather a way of identifying what the districts is, what the road type is (i.e motorway), whether it's rural or urban, and the totals for a number cross referenced factors (i.e total road lengths for Dacorum) based on the existing formatting?
I have tried indexing, vlookups, index, pivot tables, index match match ...all to varying degrees of success. Whilst these function to a degree if the table orders were to be formatted differently in the future these methods cease to work and I would have to check this manually.
Therefore if you can alert me to any possible way of picking factors based on criteria and then returning the results.
Example table (it has a number of headings and in a variety of positions within the page)...
Motorway and Trunk Roads Principal Roads (De-Trunked) (Route Length)
is it possible to select the data to view by running a macro. my table is based on dates. i would like to see all data before the date i run the table and 6 weeks in front only.
I have a table (which has 100s of rows) and I want to find out for each row entry, which column the first non-zero number appears. I have attached an example. Items 7, 12 and 16 first appear within this time period and I would like the First Appeared column to say Week 12 (for Item 6), Week 8 (for Item 12) and Week 18 (for Item 16).
i have a pivot table that shows the customer names. when i select the customer drop down box i can all the customer i want to see. but in the table itself there are some customer not showing. this is the first time this has happened
I have a workbook where in Sheet1 Cell A1 is a customer name, and A2:A5 contain parameters for the customer. I would like to be able to input those data to a Vlookup table on Sheet2. (The Vlookup is used to fill values on Sheet3).
I have been trying to create a macro to copy those parameters from sheet1A2:A5 by finding the match for A1 in the Vlookup table in Sheet2 and then copying to the corresponding matching row , A2 pasting into column 3 (on the corresponding row of course), A3 into colum 4, A4 into column 5 and A5 into Column 6.
I have a spreadsheet that is being updated every month with new project information. The spreadsheet is a log of all the hours worked by employees on each project. Due to many employees working on the same projects and each weekly log per engineer having an individual row to display these hours, there are many duplicated cells.
I am wondering if there is a way for me to display in another table, just a list of the projects that exist.
For example, the original table may look something like this:
WEEK MONTH PROJECT HOURS 1 Jan A 5 1 Jan B 4 1 Jan A 7 5 Feb C 5 5 Feb C 3 5 Feb B 8
I would like to display a table that looks like:
PROJECTS A B C
In March there could be a project D and I would like that to be automatically added on to the second table, if possible?
I have a standard bar graph with 2 sets of data: 1 dataset on the primary axis and 1 on the secondary axis. I have defined the legend entries fairly specifically so the descriptions are long. I have also inlcluded a 'rank' value into the graph which doesn't appear on the graph as the values on either axis aren't at a range that allows it to display. However, I want to display the rank value in a table below the graph. However, when I add the table, the legend entries are so long, the graph gets 'scrunched' and looks terrible.
Is there a way to either:
1.) Only show the rank data in the data table below the graph? or 2.) Show only the data in the data table below the graph and not the legend entries? or 3.) Another option to display the rank data on the graph?
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
