Is there a way to set a tabing order in excel 2000? If so where do I find it or how do I set it up. If there isn't a way might there be a way once i create the permissions in 2003 to revert it back to 2000 and keep the same permissions.
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
Where do i find the numbering add ins for Excel 2000? I receive a message every time I open a document that says: I must load them for optimal numbering and toolbar behavior. I have looked in the add ins by going to add remove program, selecting Microsoft office, then change, then excel. under the add ins there is nothing that says "numbering". I have also looke on line for a down load at the Microsoft web site.
Last monday I clicked on my quick launch icon for my time card, which is in excel. It opened up, but I got an error message saying that excel had an error, send report or don't send report. Closed everthing out and clicked on the icon again, but this time excel oppend but the file did not. I get just a blank (don't know what to call it) spreadsheet. There are no cells to enter anything in. I do get the "File, Edit, View, and so on" at the top. I can click on File than Open and browes for the file and open it that way, but I can't open any Excel file by double clicking it in explorer.
I have created an AddIn with code for menu buttons. When I delete the .xlb file it is replace with one about 12 KB. After some use it starts growing. One station had it to 1 meg. Could this increasing file cause problems for the code? If so, is there a way to keep it from growing?
I coppied this code from: http://www.contextures.com/xlToolbar02.html. Modified it to show menus but how to add sub menus? (This is the only code I found that works on Excel 2000, so far).
In using Autofilter on a Date column in Excel 2007 compatibility mode (Vista) and in Excel 2000 (XP), I receive different selection criteria (see pictures attached). In Excel 2007, I can select by year, by month. In Excel 2000, I am presented with all dates available in the filtered column.
I realize I can do a custom filter in Excel 2000 with a range of dates to select only the month I wish to query but this is cumbersome for the user. Is there VBA code available that will allow the same or similar selection criteria in Excel 2000 as is available in Excel 2007?
I have a total in F16 that i need to find an average of.
The range is set from f4 - f15 (12 months) and need to find the running average per month. but as we only have done 5 months of the year so far that is the only average required (F16/5).
I need this to count at the end of june (F16/6) basically not counting any zero months (jul, aug, sept etc until the end of each)
I have made a couple of Macros in VBA for 2007 that resize re-font etc a graph, and another one that exports te graph as an image. I want to use these macros on a few other machines but they are running older versions of Excel and i get an error when i try and use the macros.
Would someone mind taking a look and showing me how to adapt them to work in excel 2000/2003
If ActiveChart.HasLegend Then ActiveChart.Legend.Font.Name = "Verdana" ActiveChart.Legend.Font.Size = 16 End If..........................................
I have built a nice employee time tracking device in Excel 2000. It is pretty self explanitory ("IN" time, "OUT" time, total time, etc). What I am having problems with is the VB code that is behind the "OUT" time. In essence, once an "OUT" time is entered, the ms error message box is overwritten to ask what type of break the person took (No Lunch, 1/2 hour, 1 hour) and takes the response and implements it into the Total hours calculation. Works great in 2000, but the users are getting problems in 97. i don't have 97 and can't seem to trouble shoot it. Could some guru with 97 have a look at this and see what exactly I am missing in 97.
The code is a manipulation of Ken Getz's brilliance by Stratos. Which can be viewed at the following: http://groups.google.com/groups?hl=e....warwick.ac.uk
I have an activity recording tool created in Excel 2003 which works perfectly (ish) However when some of my colleagues use it on machines running Excel 2000 it falls over at the following definition
Dim dlgFile As FileDialog
this is part of the following sub routine
Sub doCopy() Application.ScreenUpdating = False Call Archive Dim dlgFile As FileDialog Dim rv As Long Dim sCreated As String Dim sClosed As String Dim wsThis As Worksheet Dim wbkAOM As Workbook Dim sThisCol As String Dim aAOMCol As String Dim strDate As String Dim wsCore As Worksheet Dim wsDiverted As Worksheet Dim iRow As Integer Set wsThis = Application. ActiveWorkbook.ActiveSheet Set dlgFile = Application.FileDialog(msoFileDialogFilePicker) dlgFile.Title = "Select AOM Sheet" dlgFile.InitialFileName = "*.xls" rv = dlgFile.Show.......................
Using excel 2000 on windows XP (home). When saving data as a web page the grids do not show despite having the page setup "show grids" box ticked. It makes reading the file on line hard to follow.
I am pulling my hair out trying to figure this out. Any help at all is greatly appreciated. I created a spreadsheet for a friend to track his profit/loss for his business; he is not very computer literate so I created separate tabs for each month. I have no idea what he did but the horizontal scroll bar and all of the tabs are not visible, he is using excel 2000 on windows XP. Unfortunately we are not in the same area so I can’t go look at his screen. When he emailed the file back to me and I opened it, it looks fine. Also when he opens any other file it does the same thing. I have gone through all of the obvious causes, everything is correct in the tools, options.
I convert text file into Excel. Then what I want is to look in column C for cell value “UNT:” (it is chopped word account: ) and copy value what is in the same row next column D into column K.
Then in column K copy down the value until next not empty cell.
My problem is that it works on Excel 97 and 200 but 2003 doesn’t work.
I have constructed a macro, (with lots of help from the fine people on this site), and have distributed it to several people in the company. The macro was written in Excel 2003, and runs perfectly on all the machines running Excel 2003, but persons using Excel 2000 are getting a runtime error, variable not defined.
Is there a trick to getting a macro to run in both versions of Excel?
We are currently on Office 2000, but our IT group are considering a company wide switch to 2007. I've played around with it just briefly, but noticed that it is night and day difference in both look and feel.
We use Hyperion Essbase, and have a custome built planning tool that utilizes Excel 2000, enhaced with a few thousand lines of VBA coding. One of the main purposes of the VBA code, is to control the Excel menus and replace with custom built menus that are specific to our Planning System.
Does anyone have any idea if VBA controlled custom menus from Excel 2000 will even work in 2007? Will I have to do complete rewrite?
One last question, If you are running 2007, is there a transition function (simlar) to prior versions, where you make the menus look like the legacy version?
I've created quite a few workbook/worksheets in excel 2007 compatibility mode that are data entry intensive. When protecting these worksheets, you have the option of allowing the user to "select locked cells". I invariably uncheck this option because the user doesn't need to interact with these cells.
However, several of my users are running Excel 2000 and the same option is not available when one protects a worksheet in Excel 2000. Is there a way to do that in VBA for these Excel 2000 users such that when they click on a locked cell, the cursor will not respond to that cell?
I am using VB6 to automate excel. Ofcourse, the code needs to work with 2007 and all lower levels. When trying to save the excel doc in 2007 I get no errors. However, in 2000 (using the same code) I am unable to save my document.
Here is the OfficeDoc.SaveAs FileName:=NewFileName, FileFormat:=FileFormatValue
It fails with error 1004: application-define or object-defined error.
I have checked to make sure no other office documents are running in the background under task manager.
I have 2000 excel files all saved as different names.
The Names of the the files are all from greyhound racing results, here are some examples.
4th January 2008 7.30 4th January 2008 7.45
So we have the date of the race and the time of the race.
In these 2000 files there is certian information I want to retrieve into 1 excel sheet to run analisis on them.
So cell A1 in every file is always the same and may contain a number I need.There are several numbers I want to retrieve from each file but I want it to display in 1 sheet, now I can do this manually and may have to but lets see.
What is the command to move the active cell? For example, suppose C15 is the active cell, and I want a macro to move the active cell one to the right. Or maybe 3 to the right, and one down. The deal is, I'd like to be able to make the active cell move in a fixed pattern relative to the cell that is already active (before the macro is run), rather than moving to a final fixed destination (which would be something that even I could figure out). In other words, if I select R20, and run the macro (or whatever other mechanism you guys come up with), then R21 will be selected; likewise, I can click G12, run the macro, and G13 will be selected.
I have a macro which is able to run very fast in Excel 2000. Almost 5s. When i run it in Excel 2003, it takes almost 4 to 5 mins to complete. Is there any patch in 2003 i need to run the macro smoothly?
I have an access 2000 database with many tables of data in it.
The tables have 12 fields containing customer information as follows:
1-vendor#, 2-bar code #, 3-store#, 4-department#, 5-style#, 6-item colour, 7-size, 8-active in basics stock, 9-sales, 10-stock on hand, 11-orders placed, 12-week end date
the pivot tables in excel 2000 track this data week by week, which are linked to tables in the access database.
Everything was working fine until I tried to perform a security wizard on my access database so users could not make any changes to the tables in access>>>>>>This corrupted my database some how!
As a possible solution I re-created an entirely new access database, thinking that I could continue to create pivot tables and everything would move smoothly as prior to the corruption, but ive been having problems.
PROBLEM:
After linking the data from access to excel to create my pivot tables the data from the table that is retrieved from access table is incorrect. it come up with repetative figures eg....15 15 15 or 18 18 18 when the
Ive tried sources on the site and web vbut nothing helps tried manuals etc- contacted my It dept at work but they have no clue on this issue.
Hope there is a guru expert out there some where... who can help!
please see below: CORRECT DATA store(All) date13/10/2007 Sum of Stk on hand size stylecolourLMSXLGrand Total HEDI 99 ASSORTED74486 JEDIASSORTED74553741207 KEDIASST1371557175438 M1018NAVY223 WHITE221 PEDIASSORTED79644947239 U1008BLACK1371278054398 GREY HEATHER107577861303 WHITE1071076864346
Ive also tried to compact repair the access database... didnt work- tried refreshing the pivot table didnt work....im fairly certain that the data in the access table is correct.....im beginning to think there is a problem with the pivot table although they used to work when i did them before so not quite sure why this is happening and how I can resolve it?