2000 And Operating Systems
Aug 23, 2009If I have an application developed in Excel 2000 with Vista Operating System, does it matter what operating system (XP or later) under which it runs.
View 2 Replies
ADVERTISEMENT
Calculating Time All (redundant) Systems Down
Sep 20, 2013I have redundant system groups. One group may have (for example) two computers running. Another group may have eight computers running. But within any group only one computer needs to be running for the system to be operational.
I have a row with down start date/time (Column-A) and down end date/time (Column-B) for each downtime event. In then next columns I have the start times and end times for the other computer(s) in the group.
Finally, I have a date column to the right of all others (one row per day). Next to the date column I need to have the value that represents the common time all computers in that group were down.
I don't much care if this is done with a formula or by VBA. I can split the date and time values into separate columns and format the values however needed to facilitate the calculation.
I've placed an example workbook at the following location. [URL] ...
Test Speed Of Macro On Different Systems
May 26, 2007ran the following macro on the new computer and on two other computers...
View 9 Replies View RelatedSum Simultaneous Operating Hours
Jan 16, 2013I'm putting together a workbook which tracks operating hours for 17 pieces of equipment (units) at 7 job sites.
I need to track and record the number of hours where at least two of units 1-6 operate simultaneously each month.
So far I have only succeeded in creating another table which pulls all records for units 1-6 from the Log. The table can then be sorted by date (for some reason, this sorting only kind of works) so simultaneous operating hours can more easily identified and summed manually.
I'll attach a workbook with mock data which shows what I have so far. The complete workbook also does some other calculations which I have removed for clarity. That is why there is some "extra" info in the workbook.
The workbook is set-up where:
LOG: This is where the user records when each unit was operated.
LOG2: This is where I've attempted to isolate records for units 1-6 and sum simultaneous operating hours.
Factors+Limits: This is where the fields for the lists are stored as well as other factors used throughout the workbook.
Monthly: I'd like to be able to records simultaneous operating hours here.
Detect Operating System
Mar 8, 2008how can I detect the OS of the computer a sheet is running on and launch a macro accordingly?
I have built a calculator that utilizes an embedded wave file but doesn't work correctly with Vista. With Vista it actually causes WMP to be launched instead of just playing the file. So I was hoping to be able to skip the sound on Vista machines but play for all other OS's.
Excel 2010 :: Count If Not Operating
Jul 22, 2014As per the attached sheet Count If is not operating.
Effective Reading Capability
Effective Reading Capability
Effecting Writing Capability
Application of Basic Mathematics 0.4
Effective Listening Skills 0.3
Effective Speaking Capability 0.3
Attitude to Cleanliness 0.3
Idea Generation & Creative thinking 0.1
Decision Making Skills ( Upto the mandate)0.2
[code].....
here If I say Countif(B4:B20, >=0.5) But it shows Zero.
Operating Macro On Select Worksheets
Jun 19, 2014I need to create a macro that inserts a row on a selected cell on a worksheet then performs the following function on 5 different worksheets. The worksheet names are "MD Forecast", "ED Forecast", "MB Forecast", "PW Forecast", and "RV Forecast".
The code I need ran on the worksheets is:
Formula:
[Code] .....
If possible, the row that is initially inserted would be the row that the code needs to be performed on. The function of the code above is to copy everything on the inserted row and 300 rows below, paste one row below the new row, and finally clear the contents of the inserted row. The column range for this to be done to is I:BH.
Nested If (and) Statement - Operating Leases
Dec 5, 2008I am currently working on doing some operating lease schedule. I send the info to the field and people fill out the information such as the term of the lease and payment. Then I need to review the terms of the lease and if the term is after 8/31/09 then the lease is classified as long term thus I need to compute the payments until the lease expires. Currently this process is done manually and people have to go and calculate payment by payment which just makes it hard for me to review all the spreadsheets that we get. In the past this process takes about three days to review but I know there is a faster way.
I am attaching what I have created and I put some comments in the worksheet to better explain.
IF Formula For Real Estate Operating Costs
Oct 25, 2007I am trying to set up an IF formula for real estate operating costs. I am guessing that this is going to work best with an IF statement.
(Sample of the spreadsheet is attached)
I know this is wrong but it expresses what I am trying to do.
=IF(C5="Gross",B10=following year of B9 with month/Day being 1/1), if not B10=the folling year of B9 with same month/day)
1Cell C5 can either be Gross or Net from a drop down list.
2Cell B9 lists 3/1/2008
3If cell C5 is gross, cell B10 should be the following year from cell B9 but with starting with 1/1/??? As the month and day(year start).
B11 would then be the following year from B10
(following month/day pattern).
4If Cell C5 is NET, cell B10 should be the following year from cell B9 using the same month and day 3/1/????
Ship Date Based On Current Systems Date
Dec 14, 2011I have a report that in column A shows a ship date. These ship dates may be "Previous","Same Day", "Next Day", or "Future".
I need VBA code that will look at the day in column A and determine if it matches the current date on the computer if it does then in column W in the same row I need the string "Same Day".
If its the systems date plus 1 day column W in the same row would state "Next day".
If its the systems date plus 2 or more column W in the same row would state "Future".
If its any date prior than than the current system date then column W in the same row would state "Previous".
Macros Crahes - Alert Alert - Shut Down All Systems
Mar 27, 2007Each month I get a report that I process using a macro. The problem is that each month the name of the file changes and is different. When I run the macro and it crashes I have to de-bug by going through the code to change all references to the file name from the the previos run and change to the latest file name and then re-run the macro. There must be a better way.
I would like to learn the code that sees the open book and then refers to it for the run.
What is the best way to do this?
Add Ins For 2000
Mar 30, 2005Where do i find the numbering add ins for Excel 2000? I receive a message
every time I open a document that says: I must load them for optimal
numbering and toolbar behavior. I have looked in the add ins by going to
add remove program, selecting Microsoft office, then change, then excel.
under the add ins there is nothing that says "numbering". I have also looke
on line for a down load at the Microsoft web site.
Calendar Pop Up In 2000
Oct 17, 2008I created a calendar control pop-up in Excel 2003.
To create, I did the following:
First: I went to Insert>Object>Calendar Control.
Second: I inserted following code
#NAME (2000 OK 2003 NO)
Nov 23, 2006Excel 2000 spreadsheet everything is fine.
When I open the same file in excel 2003 #NAME? Error appears.
I check Accept Labels in Formulas and it helped in some places but not everywhere.
I still have lots of NAME errors in a relatively simple spreadsheet.
I Excel 2000 everything works fine.
2000 Opening Files
Mar 12, 2007Last monday I clicked on my quick launch icon for my time card, which is in excel. It opened up, but I got an error message saying that excel had an error, send report or don't send report. Closed everthing out and clicked on the icon again, but this time excel oppend but the file did not. I get just a blank (don't know what to call it) spreadsheet. There are no cells to enter anything in. I do get the "File, Edit, View, and so on" at the top. I can click on File than Open and browes for the file and open it that way, but I can't open any Excel file by double clicking it in explorer.
View 10 Replies View RelatedDelete The .xlb File In 2000
Dec 2, 2008I have created an AddIn with code for menu buttons. When I delete the .xlb file it is replace with one about 12 KB. After some use it starts growing. One station had it to 1 meg. Could this increasing file cause problems for the code? If so, is there a way to keep it from growing?
View 5 Replies View RelatedToolbar Menu (2000)
Jul 2, 2009I coppied this code from: http://www.contextures.com/xlToolbar02.html. Modified it to show menus but how to add sub menus? (This is the only code I found that works on Excel 2000, so far).
View 4 Replies View RelatedAutofilter 2007 Vs 2000
Sep 7, 2009In using Autofilter on a Date column in Excel 2007 compatibility mode (Vista) and in Excel 2000 (XP), I receive different selection criteria (see pictures attached). In Excel 2007, I can select by year, by month. In Excel 2000, I am presented with all dates available in the filtered column.
I realize I can do a custom filter in Excel 2000 with a range of dates to select only the month I wish to query but this is cumbersome for the user. Is there VBA code available that will allow the same or similar selection criteria in Excel 2000 as is available in Excel 2007?
Find An Average In 2000
Jun 2, 2009I have a total in F16 that i need to find an average of.
The range is set from f4 - f15 (12 months) and need to find the running average per month. but as we only have done 5 months of the year so far that is the only average required (F16/5).
I need this to count at the end of june (F16/6) basically not counting any zero months (jul, aug, sept etc until the end of each)
VBA - Using 2007 Macros In 2000
Feb 2, 2009I have made a couple of Macros in VBA for 2007 that resize re-font etc a graph, and another one that exports te graph as an image. I want to use these macros on a few other machines but they are running older versions of Excel and i get an error when i try and use the macros.
Would someone mind taking a look and showing me how to adapt them to work in excel 2000/2003
First macro:
Attribute VB_Name = "Module11"
Option Explicit
Sub ModifyChart()
Attribute ModifyChart.VB_ProcData.VB_Invoke_Func = "u
14"
ActiveChart.ChartArea.Width = 900
ActiveChart.ChartArea.Height = 600
ActiveChart.ChartArea.Interior.Color = RGB(233, 233, 233)
ActiveChart.PlotArea.Interior.Color = RGB(233, 233, 233)
If ActiveChart.HasLegend Then
ActiveChart.Legend.Font.Name = "Verdana"
ActiveChart.Legend.Font.Size = 16
End If..........................................
2000 To 97 Conversion Issue
Apr 29, 2003I have built a nice employee time tracking device in Excel 2000. It is pretty self explanitory ("IN" time, "OUT" time, total time, etc). What I am having problems with is the VB code that is behind the "OUT" time. In essence, once an "OUT" time is entered, the ms error message box is overwritten to ask what type of break the person took (No Lunch, 1/2 hour, 1 hour) and takes the response and implements it into the Total hours calculation. Works great in 2000, but the users are getting problems in 97. i don't have 97 and can't seem to trouble shoot it. Could some guru with 97 have a look at this and see what exactly I am missing in 97.
The code is a manipulation of Ken Getz's brilliance by Stratos. Which can be viewed at the following: http://groups.google.com/groups?hl=e....warwick.ac.uk
Set A Tabing Order In 2000
Jun 24, 2006Is there a way to set a tabing order in excel 2000? If so where do I find it or how do I set it up. If there isn't a way might there be a way once i create the permissions in 2003 to revert it back to 2000 and keep the same permissions.
UDF Compatibility Between 2003 & 2000
Aug 17, 2006I have an activity recording tool created in Excel 2003 which works perfectly (ish)
However when some of my colleagues use it on machines running Excel 2000 it falls over at the following definition
Dim dlgFile As FileDialog
this is part of the following sub routine
Sub doCopy()
Application.ScreenUpdating = False
Call Archive
Dim dlgFile As FileDialog
Dim rv As Long
Dim sCreated As String
Dim sClosed As String
Dim wsThis As Worksheet
Dim wbkAOM As Workbook
Dim sThisCol As String
Dim aAOMCol As String
Dim strDate As String
Dim wsCore As Worksheet
Dim wsDiverted As Worksheet
Dim iRow As Integer
Set wsThis = Application. ActiveWorkbook.ActiveSheet
Set dlgFile = Application.FileDialog(msoFileDialogFilePicker)
dlgFile.Title = "Select AOM Sheet"
dlgFile.InitialFileName = "*.xls"
rv = dlgFile.Show.......................
2000 - Save Data As A Web Page
Apr 20, 2009Using excel 2000 on windows XP (home). When saving data as a web page the grids do not show despite having the page setup "show grids" box ticked. It makes reading the file on line hard to follow.
View 2 Replies View Related2000 Sheet Tabs Missing
Jan 21, 2010I am pulling my hair out trying to figure this out. Any help at all is greatly appreciated. I created a spreadsheet for a friend to track his profit/loss for his business; he is not very computer literate so I created separate tabs for each month. I have no idea what he did but the horizontal scroll bar and all of the tabs are not visible, he is using excel 2000 on windows XP. Unfortunately we are not in the same area so I can’t go look at his screen. When he emailed the file back to me and I opened it, it looks fine. Also when he opens any other file it does the same thing. I have gone through all of the obvious causes, everything is correct in the tools, options.
View 8 Replies View RelatedMacro Works In 97 & 2000 But Not 2003
Mar 15, 2007I convert text file into Excel. Then what I want is to look in column C for cell value “UNT:” (it is chopped word account: ) and copy value what is in the same row next column D into column K.
Then in column K copy down the value until next not empty cell.
My problem is that it works on Excel 97 and 200 but 2003 doesn’t work.
Macro In 2003 Is Not Working In 2000
Apr 25, 2008I have constructed a macro, (with lots of help from the fine people on this site), and have distributed it to several people in the company. The macro was written in Excel 2003, and runs perfectly on all the machines running Excel 2003, but persons using Excel 2000 are getting a runtime error, variable not defined.
Is there a trick to getting a macro to run in both versions of Excel?
Custom Menus 2000 Vs 2007
Feb 6, 2009We are currently on Office 2000, but our IT group are considering a company wide switch to 2007. I've played around with it just briefly, but noticed that it is night and day difference in both look and feel.
We use Hyperion Essbase, and have a custome built planning tool that utilizes Excel 2000, enhaced with a few thousand lines of VBA coding. One of the main purposes of the VBA code, is to control the Excel menus and replace with custom built menus that are specific to our Planning System.
Does anyone have any idea if VBA controlled custom menus from Excel 2000 will even work in 2007? Will I have to do complete rewrite?
One last question, If you are running 2007, is there a transition function (simlar) to prior versions, where you make the menus look like the legacy version?
Macro Bombs Excel 2000
Jun 1, 2009I've developed a workbook with macros in Excel 2007 (Compatibility
Mode), Windows Vista Operating System. The purpose of the Macos
is to allow auto complete on a validated data entry field.
The macros run fine on this platform. I then copied the workbook
to my desktop, Excel 2000, Windows 2000 Professional Operating
System. One of the macros is killing Excel on this platform.
Select Locked Cells In 2000
Jun 15, 2009I've created quite a few workbook/worksheets in excel 2007 compatibility mode that are data entry intensive. When protecting these worksheets, you have the option of allowing the user to "select locked cells". I invariably uncheck this option because the user doesn't need to interact with these cells.
However, several of my users are running Excel 2000 and the same option is not available when one protects a worksheet in Excel 2000. Is there a way to do that in VBA for these Excel 2000 users such that when they click on a locked cell, the cursor will not respond to that cell?