Set Up And/or Edit In Macros
Jul 16, 2009how to set up and/or edit my macros so that I can use them in various outside workbooks without having to open the specific workbook I put the actual macros in?
View 2 Replieshow to set up and/or edit my macros so that I can use them in various outside workbooks without having to open the specific workbook I put the actual macros in?
View 2 RepliesI accidently put the Application.Quit command in the wrong place. Now Excel closes immediately when the macro executes. I can get into Excel if I disable the macro, but then it won't let me edit the macro. Is there a way to edit my macro without executing it?
View 7 Replies View RelatedI have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
What is the commands or script for deleting a macro automatically using
another workbook macro.
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies View RelatedI have two macros. Macros 1 opens another excel file, counts the number of rows it has, inserts that number of rows into the master file and then copies the data over. Key code as follows (x3 for 3 worksheets)...
For k = 1 To numrows
Selection.EntireRow.Insert
Next k
Macros 2 'cleans' the appended data by systematically going through each row, checking if certain cells have data, and if not deletes the rows. Key code as follows (x3 for 3 worksheets)...
For l = lastrow To 12 Step -1
If WorksheetFunction.CountA(Range("B" & l & ":C" & l)) = 0 Then
Rows(l & ":" & l).Select
Selection.Delete Shift:=xlUp
edelrows = edelrows + 1
End If
Next l
Here's the weirdness. macros 1 runs fairly quick the first time out (few seconds). Macros 2 takes about 2 minutes to run (which I'm fine with). However, when I run macros 1 AFTER running Macros 2, Macros 1 goes from taking a few seconds to a few minutes.
how to use excel 4 macros. I do not even know where to put them. I have inherited some spreadsheets that have both Xcel 4 Macros and vba macros in them. (Well, I get a warning that I cannot switch them off when I disable macros on opening a workbook). I cannot even find the offending version 4 macros so that I can re-code them in VBA.
Is it possible to edit my .bat file using vba?
View 1 Replies View RelatedI am using Excel 2000
I have recently opened a file sent to me, and since closing it my Edit menu does not work properly when I open any existing files or start a new file
The problem is with Copy, Cut Paste and Paste Special, when I click on the Edit menu they are all greyed out, also if I right click they are also greyed out
Obviously the file I opened has changed some settings, how do I re-set this
Is there a way to setup a spreadsheet so data that has been entered cannot ne deleted or edited, and only the last field in the column can be accessible? So if I have info entered in a1, a2, a3, b1, b2, b3, no one can edit or delete them, and can only add to a4 and b4? Will I need to write a macro for this or is it something I can do with certain settings?
View 9 Replies View RelatedThe edit box used to make or edit ranges for Defined Names is VERY difficult to use for long char strings. The arrow keys do not move the cursor within the edit box & the end key does not work.
How to edit range names that are 100-200 characters long?
Are there settings to alter behavior of arrow keys withing these "range definition boxes"?
I have an autoshape with a text box in it. It is one of those "scroll" shapes. I want to be able to edit the text in the box with VBA, but I don't know how to call it because I can't seem to find the properties for it. I tried recording a macro to do it, and it called it:
View 5 Replies View RelatedWhen I list my macros using alt+F8 the edit option is no longer available, any ideas what I have done?
View 9 Replies View Relatedhow can I open a .txt file with vba and replace alll "," with ";" ?
I am facing problem with my footer, which is as under:
___________________________________________
E-mail: xxx_yyyy@somewhere.com
My footer should be printed at the bottom of my paper as shown above. But, as expected, when I change margins of page or even change the printing preference, like best print to draft print or like that, it goes changing like this:
________________________________________________E
-mail:xxx_yyyy@somewhere.com
or like this:
_________________________________________________
__E-mail:xxx_yyyy@somewhere.com
So, it become headache for me. i have to first see the print preview and then after I can go for printing. How to deal with this problem?
There should be two lines in footer: first will have _____________________________________only and the second one will have E-mail:xxx_yyyy@somewhere.com
My purpose is to give my endusers a workbook with a macro in it which applies changes to existing workbooks on their computers. I want the enduser to select each workbook to apply the changes and have the macro capture the names of the workbooks so they can verify that all of the appropriate workbooks have been changed.
I’m trying to change two types of data: (1) text, (2) formulas.
Here's what little I have, but not much is working.
Sub ChangeBACKLOG()
MsgBox "Open the FILE to which the Backlog fix is to be applied."
Dim targetWorkbook
dlgSource = Application.Dialogs(xlDialogOpen).Show
Set sourceWorkbook = ThisWorkbook
Set targetWorkbook = Workbooks.Item(Workbooks.Count)
On Error Resume Next
I've been trying to resolve an issue with the userform that i created. It adds new records to the sheet "Data" but i can't seem to add a search/edit function to it.
It could be either a combobox with the existing Project Id's or a text box + a control button, so a user could enter Project Id and hit a button.
The spreadsheet example is attached : Project Entry Form.xls
Is it possible to edit multiple =VLOOKUP formulas to add in a "[range lookup]" = FALSE without editing each one individually? I was going to use a find and replace for the "col_index_num" and add the FALSE to the end of that, but in this case my "col_index_num"s vary too much.
View 6 Replies View RelatedI have a sheet which has many columns in it, all columns are protected except column B. When I want to enter data always I have to insert a column in column B. When I clicked insert button, my B column move to C and B column become protected and C become unprotected. My query is always I want B column should be protected (even if i clicked on insert column button too).
View 1 Replies View RelatedI suddenly can not edit in a cell by double-clicking on it. I can only edit in the fx bar on top. Other sheets in the workbook still work normally. What causes this, how can I fix it and how can I make sure it doesn't
View 5 Replies View RelatedI need to edit the hyperlinks in my excel sheet. I know how to do this manually and edit one at a time, but I need to change 3000 of them!
Is there a way I can do this without going through each one?
i have an excel sheet that has a cell with a formula in it. This cell has been locked by the previous user.
I am unable to click on it and it because it is showing a #NAME? error, i need to edit it somehow. Is there some way i can edit it?
The formula below works apart from the first bit which i want to be if F23 says 'fail' then i want the cell to say 'no dissertation' but if f23 says pass then i want the formula past that bit to be put into action.
=IF(F23="Fail",0)*IF(COUNTIF(B22:B45,"Dissertation")=1,IF(VLOOKUP("Dissertation",B22:C45,2,0)>39,LOO KUP(F26,{0,40,50,60,70},{"No Dissertation","3rd","2:2","2:1","1st"}),"No Dissertation"),"No Dissertation")
isolation123
Heres a strange thing, My latest version of a spreadsheet i have design has got a small problem. When clicking on a cell, nothing appears in the edit window, and when you double click on the cell to edit the contents the data disappears.
This only happens on one sheet within a workbook of 7 pages. The werid thing is that it does not happen on the version before
Any ideas how this could of happened and is there a fix?
I've read a bit on the web about there being a bug with the 'edit links' feature. How/Can I get this function to work?
View 6 Replies View RelatedI have a worksheet with what appears to be symbols or text boxes; squares, some with a check mark in them, some without. cannot select any of them to edit or delete them, I can type in the cell behind the symbol, the symbol hides the text. I can copy and paste them, but not delete them. how to identify them to edit and/or delete them. Password protection and all cells are unlocked as well. I have stumped as well as other forums.
View 4 Replies View RelatedI have a macro enabled spreadsheet in which I am able to paste in the customer number as text, but I need to touch the cell in order to make the customer name populate in the next column.
Double click - enter and F2 -enter both will do this, but I'd rather not be doing this for 200 rows every time I have to use it. Is there a way to touch all of these rows without VBA? The spreadsheet was built by our IT department years ago and is rather fickle. I can't risk interrupting the code or I end up having to close it and start over. It's password protected.
Text to columns doesn't work.
i have a worksheet that gets data from web - its automated, but the website goes through a tunnel - with security - requires username and password
the Query Runs ok and smooth but i have to login manually by right clicking on a table where the query is and selecting "Edit Query" so i can login, excel vba doesnt save passwords for that part...
one way i find it possible to automate that part too would be to use maybe like the sendkeys statement to pop up the context menu from right clicking the mouse button, or like the options button on the keyboard.
I found this one:
[Code] .....
It works but the context menu comes exactly from where the current mouse position is..
I needed it to do the right click on a specific range in the worksheet (where the web query is)..
I have created a complaint database with a spreadsheet and a userform in Excel. Only part of the information is known at the time the user enters the complaint. I have created a search feature so I can search for a record using a unique identifier called RecordNo. I can call up a record and change the information in the record or add additional information. When I hit the command button save it stores a duplicate record with the new information. I don't want duplicate records.
Also some of the data fields do not fill the original data. It seems to be inconsistent in the way it loads the original record data into the userform. This issue happens consistently with the weather items that are check boxes and also with the Complaint Taken By field. I am a beginner and have found most of the code to write this database online. So perhaps there are some conflicts between code from different sources. I've uploaded the spreadsheet and userform.
Forestry Complaints WIP.xlsm‎