Edit Multiple Cells At Once
Jan 8, 2014
I have a macro enabled spreadsheet in which I am able to paste in the customer number as text, but I need to touch the cell in order to make the customer name populate in the next column.
Double click - enter and F2 -enter both will do this, but I'd rather not be doing this for 200 rows every time I have to use it. Is there a way to touch all of these rows without VBA? The spreadsheet was built by our IT department years ago and is rather fickle. I can't risk interrupting the code or I end up having to close it and start over. It's password protected.
Text to columns doesn't work.
View 4 Replies
ADVERTISEMENT
Dec 9, 2013
Is it possible to edit multiple =VLOOKUP formulas to add in a "[range lookup]" = FALSE without editing each one individually? I was going to use a find and replace for the "col_index_num" and add the FALSE to the end of that, but in this case my "col_index_num"s vary too much.
View 6 Replies
View Related
Apr 24, 2007
I need to edit multiple validations in a worksheet. There are over 990 validation for each month. I want to change the word in the sentence. Example: April to May. Right now I have to edit each one seperatly. I have tried a macro but it changes to whole sentence. Find and replace do not allow editing in a validation.
View 9 Replies
View Related
Oct 22, 2007
I used the macro editor to create a "simple" macro to edit 7 rows of text. The steps were basic and simple - F2 key, backspace about 25 times, and down arrow then repeat these 3 steps 6 more times. The macro I got gave me the result of the very first cell as I was recording the macro. I think I remember the old Lotus 1-2-3 macro text - {edit}{backspace}{down}. Wish it were still that simple.
View 5 Replies
View Related
Jul 6, 2011
I need to copy information from one excel file and paste it into the same location (A1-A1, B6-B6, etc) in many other files all at once. Essentially I have several thousand files that need to be updated right now. I need to copy and paste both the cell contents and the formatting.
View 1 Replies
View Related
Jan 22, 2010
- I have some buttons set-up to insert pre-set diagrams from sheet “FISH PARTS” onto sheet “THE JUMPER FISHBONE”
- However, before inserting a new diagram onto sheet “THE JUMPER FISHBONE” I need to make sure the default diagram components are all gone.
- There are seven components all with structure Like “BONE_*”
- If one or more of these components are present I want to display a message to confirm the user wishes to delete the default diagram and insert new chart (or abort is they do not wish to delete the default)
- some explaination of structure below
- spreadsheet also attached
View 2 Replies
View Related
Sep 25, 2013
Not exactly what year of Microsoft Excel we have at work buts its between 2007 to 2010.
Doing our weekly KPI on a friday is super stressful and if there is a way so multiple users can edit the excel spreadsheet at the same time?
Because with our excel spreadsheet only one person can edit the document at a time very frustrating at the end of a day on a friday.
Is it just Microsoft not allowing more than one editor at a time?
View 1 Replies
View Related
Feb 6, 2014
I made a sheet to control some reports, and it works like this: you click a button ("Insert"), it opens a userform, you type everything there (date, serial number, client, city) and it place that info on the first row available. Then there's a "Clear Last Entry" button, and that's it.
I would like to protect the whole sheet and only allow users to insert new entries via the "Insert" button. How can I do this? If I protect normally Excel won't allow the VBA code to write on cells.
View 4 Replies
View Related
Apr 14, 2014
I know how to hit F2 in order to see which cells are highlighted within the current sheet.
How can I go over to the other sheets that the current formula has in order to see which cells are highligthed?
View 2 Replies
View Related
Aug 12, 2006
I have a template that I have hidden the formulas but allowed editing. Is it possible to create a pop up box for the end user to use to edit a cell with the hidden formula? This is a budget template with already set up formulas but the end user needs to be able to make edits but the end users are beginner excel users and if they double click on the cell the formula will automatically delete leaving the cell blank. I need a way around this so they cant view the formula but only change the data if they really mean to change it.
View 3 Replies
View Related
Aug 28, 2009
I try to edit comments in cells of a certain column and nothing happens. I am able to edit other comments throughout the spreadsheet, but when I select "edit comments" for these particular cells, no edit box is displayed for editing. It worked fine a couple of weeks ago.
View 11 Replies
View Related
Feb 17, 2009
I have several Excel files that I am about to change some data in, so I need to create an macro to speed it up. All sheets should be updated besides the last one.
The number of sheets differs between the files. The data that should be changed is in column C, starting at cell C10. But the number of rows differs. If the data in the cell begins with a Q, the Q should be removed, and if it doesn't begins with Q it should be skipped.
View 3 Replies
View Related
Sep 30, 2007
I have a spreadsheet that is very large and formated a certain way. I want to make sure that a user cant put the cursor in the lower left corner and copy cells by dragging, copy & paste, or do anything other than input data and be able to highleght text and reinput data in case they mistyped or misspelled the data.
ex: user clicks on cell E33 and types in '1234568' and then move to next cell. The user can click back on E33 and can correct by retyping. That is all the user is allowed.
The cells in question are also in ranges if this helps. EX: 'E33:AJ67'
View 9 Replies
View Related
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Apr 28, 2012
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
View 5 Replies
View Related
Sep 7, 2012
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
View 1 Replies
View Related
Jan 8, 2013
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
View 3 Replies
View Related
Jul 2, 2014
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
View 8 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Mar 24, 2012
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
"
JOES TOWING SERVICE [0123451]
123 STREET
CALEDONIA FL 12345
"
"BUBBA / SHOP
ACCURATE AUTO SUPPLY INC [0234567]
21234 HYDRAULIC DR
LOCKWOOD OR 45678
"
View 7 Replies
View Related
Oct 7, 2006
Sheet 2 is the problem.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have included a sample.
View 9 Replies
View Related
Nov 21, 2012
I am using this formula but I don't know how to get it to populate more than one cell.
Here is the formula:
=INDEX(APPROVED!$A$3:$A$1000,MATCH($F$4&$H$1,APPROVED!$D$3:$D$1000&APPROVED!$C$3:$C$1000,0))
It has multiple matches but I can only see the first match in the cell.
View 1 Replies
View Related
Jun 22, 2006
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
View 14 Replies
View Related
May 5, 2013
I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
View 5 Replies
View Related
Sep 25, 2013
I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
View 1 Replies
View Related
Jan 23, 2010
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
View 9 Replies
View Related
