I have two worksheets: "1" and "2" Now i want to filter all symbols used in Column A sheet "1" and list them in Column A of sheet "2". The results should contain no duplicates. For example:..........
View 5 Repliesway to convert all symbols (ú á) to their equvilant letters (u a) I know that I can do this manualuy with Find replace but I was hoping there was some magic that I am missing.
Please note that the exapples are only 2 of the symbols I need to convert the sheet could contain all of the varieties of symbol.
I have to convert an old dos program file to excel. I already have the list in excel but the text is in strange symbols. I know which symbol represents which
letter. As have many files to convert each time I need a makro which would save me lot of time. I have two worksheets: "1" and "2". I need a makro which replaces symbols in sheet "1" Column A through key list in sheet "2".
Example:...............
I would like to easily replace every character in column A with a blank, with the exception of - and a number. I am trying to get rid of all letters,:, / and other miscellaneous characters without having to delete them one character at a time.
View 7 Replies View RelatedLotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies View RelatedI have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I have a column with e mail addresses that all have > < this symbols in the beginning and at the end, how can I remove them from the column?
example
<Ana.Gomez@taca.com>
I have a find and replace function that removes + smybols from a coloum of strings. How can I remove the first instance of a space (if it later contains a +, too?
E.g.
Before: [ +Test +Test]
After: [+Test +Test]
Code:
Columns("D:D").Select
Selection.Replace What:="+", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
I know the column number (57) and want the formula to return the column name (BE) Auto Merged Post Until 24 Hrs Passes;not using vba that is! or if so , a custom function so macros dont have to be run.
View 3 Replies View RelatedI have a column of domains.
I need to add "http://" to the beginning of these domains. How can I do this?
EX. I have column A with about 27 cells of domains "website.com". I want to add the "http://" to the front of them.
Using =column() in cell A1 returns "1" as column A is column 1 with b being 2 etc.
How can I get it to return "A".
I have a listbox on a userform and I'd like to easily populate it with all the column letters (< Excel 2007) A thru IV.
I assume my code will look something like this:
for iter = 1 to 256
userform1.listbox1.additem X(iter)
next iter
what my "X" should be?
You can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
how to create some code that can convert any column number to it's respective letter, from 1 = "A" to 16384 = "XFD". The code is posted below. Enjoy, or let me know how you would improve it.
Code:
Function colNumToChar(colNum) As String
Dim Num1, Num2, Num3 As Integer
Dim Let1, Let2, Let3 As String
[Code]....
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies View RelatedI have a excell spreadsheet that consolidate information from several other excel spreadsheets generated daily. To make this consolidation I have to open each daily excell file and copy some columns(always same ones) to my consolidate spreadsheet, but each daily information goes into a different column in the consolidated file.
So, I need a way to convert the columns names into numbers to be able to use loops on the VBA code where I can specify in each column the paste has to be done.
Anyone has the VBA code that can make this column name conversion into numbers?
I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
View 2 Replies View RelatedI have several Excel workbooks that suddenly has converted to numbers for both columns and rows. Sheets that were saved and correct yesterday, upon opening today, are now numbered rather than number and letter. Any of my formulas now reference a RNumber and a number when citing location.
View 3 Replies View Relatedi have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
how can I modify the formula below so that after every row (i+60) the letter D changes to E then F, then G..... and so on. I want the following with the formula below:
=MAX($D$2:$D$61)
=MAX($E$62:$E$121)
=MAX($F$122:$F$181)
and so on...
[Code] .....
i want to sort a column in such a way that it starts with those cells having the highest number of letter. For example:
before:
AA
AAA
A
AAAAAA
AAAA
AAAAAAAAAAA
I want it to look like:
AAAAAAAAAAA
AAAAAA
AAAA
AAA
AA
A
Ofcourse the real list doesnt contain only "A"s. It contains of words and sentences.
How can i sort columns A as mentioned? The order of column A with other columns should not be destroyed be the sorting process.
I am attempting to sort a column with mixed letters and numbers. However, I have been totally unable to get them to sort the way I want them.
What I have is:
K600
K2
K2A
K2B
K159
K159A
K159B
K1
K1A
K1B
K428
K8
K8A
K8B
etc, etc. The prefix letter is only a K - no other letters. However, the suffix letters can be anything from A to E (at the present time)
I need to sort them numberically from K1 in descending order ie:
K1
K1A
K1B
K2
K3
K4
K4A
K4B
etc etc etc
How do i turn column letters to numbers and vice versa
take y values from column and take x values from row
I have 'resolved' values in column A1:A10
I have 'received' values in row B11:K11
I need to fill out a table using the tables axis values stored in the column and row above.
I have a row of numbers that change as they go up. I will have 2 rows of numbers that will range from 1's all the way to 9's (B through BO) I will have different letter sequences that I will be entering as the criteria in column F either on the Up and Down sheet or the Even and Odd sheet. When I say different sequences. This is 1 group of letters. The next group of letters in column F will be in a different order. They will always be a U and D in one and E and O in the other but in row 13 it may have a U or D and it will be the same all the way down. The object is for me to be able to place the letters in either column F from rows 13 to 60, place 2 rows of numbers in rows 58 and 59, press the advance cell in G1 and it it populates all across the spreadsheet from I to BO. I will get all different number sequences since I am starting with a different number in rows 58 and 59. I have all the letters color coded and they move up based upon the color of the letters in row 1. If there is a green E in column M then I will be the column that the number advances from 1111 to 2111. If there is a green O then column K will advance up from 1111 to 1121.
I made a short video if you wish to view it.
The conditional formatting is very important so I need to have the green font with gray shade and red font with yellow shade [URL]....
I've seen a few examples of macros to delete the row if the first letter is something, but not if the first 2 is equal to something.
I'm looking to go thru every row that contains data and look in Column B to see if it starts with P4 or P5. If that's true, then delete the entire row.
I'm trying to update a series of different sheets in a book based on what month I have filled in data for. For example, at September Month End, I will fill in data vertically. Now, I have different tabs that reference certain cells in that column. There row number never changes, but once a month I have to go through and increase their column letters by 1, and there are a lot of places to update. Can anyone lend me some ideas or a solution to how I should go about using formula/macro to update these cells.
View 9 Replies View RelatedI have a price list from a friend. The price list has to have every other row shaded. This part is no problem with the conditional format command.
The real trick, at least to me, is the background shade of the row is based on the first two letters in the left most column.
For instance:
Column A
CPST4
CPST5
FLADS3EC
FLADS2EC
FIL4
CP rows would alternate with one color while FL rows would alternate with a different color and FI rows would alternate with another different color. All other rows would have no shading.
MacOffice Excel 08 is used so no VB code can be used.
I am trying to compare two colums. They both contain numbers mixed with letters. I am wanting to match only the numbers in both not the letters. Example:
column a = m454 column b = fsh454-1
m543 fst998-2
m998 fsm434-1
my match is m454 and fsh454-1, m998 and fst998-2. The items can be in any order in the column. The end result I want to indicate the match by putting an X by column a item that matches column b.