I have data (departments) going down column A Starting in Row 4.
Then I have data (months) going across Row two. Both of these will vary in length.
I need to copy a formula from cell C1 and paste it into cells where there is a value in column A and a value in Row 2.
I have the following code,
Code:
ThisWorkbook.Sheets("Forecast").Range("A" & Rows.Count).End(xlUp).Offset(1).PasteSpecial xlPasteValues
This just pastes a value found in another wokbook into column A.
What I would like to do is paste the value in column A and paste another value in column B which is set in this part of the code,
Code:
Nominal = DEPWS.Cells(SourceCell.Row, 1) & DEPWS.Cells(1, SourceCell.Column)
So something like paste value in column A and past Nominal.value in column B
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedI am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code:
Sub mailer()
'
'
'
Dim Ash As Worksheet
Dim brng As Range
Dim OutApp As Object
Dim OutMail As Object
'Windows("Copy of FF RPL REPORT_JULY").Activate
[Code] .......
I have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
I have excel 2013.
How do I use the value of the last column as a variable within a range like I have similarly used for the last row.
View 2 Replies View RelatedI am trying to set a range for a for next loop using the result of a find, the location of the find result will always be row 1 but may be in any column after Column D. I have been trying different ways to work out this issue but have failed in all my attempts. I would be very grateful to anyone who can tell me where I am going wrong (I am sure it will be very simple).
For Each shtRegisterSheet In ActiveWorkbook. Sheets
shtRegisterSheet.Activate
Set rngFindBalance = shtRegisterSheet.Range("c1:da1").Find(what:="Balance")
dteSaledate = Format(rngFindBalance.Offset(0, -1), "yy")
dteYeardate = Format( Date, "yy")
If dteSaledate < dteYeardate Then ......................
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedYou can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test()
Dim d As Date
Dim yrint, i, num_years, fields, field_start As Integer
Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String
left_column_range_fixed = "H"
right_column_range_fixed = ":AH"
cost_column_fixed = "2"
crit1 = "=x"
crit2 = ">0"
d = Date
yrint = Sheets("Overall"). Range("H2")
field_start = 9 'changed from 9....................
how (if possible) to activate the link between the Excel spreadsheet and the VBA editor, so when I cut/paste row, columns and cells in my spreadsheet, my VBA code is automatically updated.
I have a rather large excel tool combined with a significant amount of VB code, and each time I insert/remove a line, I have to re-type the cell references,
I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below
[Code] .....
I've recorded this Macro to sort the cells in a column alphabetically if any cells have content.
I would like to use the Macro on the whole workbook however the AB column range varies between the worksheets.
How should I adapt this Macro to sort simply to the END of AB column??
' PWRII Macro
'
'
Cells.Select
[Code]....
The first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies View RelatedI am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
Ive been trying to find out how i can paste information in the next available column but between certain columns. Here is an example of what im trying to do. There is a calculator which represents 3 machines. It runs different senerios if you change the % of product going into it (cells to change this are light blue). What im trying to do is take the information the machine outputs to the right and organize it on the next worksheet.
The data on the next worksheet is a combination of all the machines performance (in yellow) together and the machines personal performance (in red). when the button is pushed currently, I have the overall scenerios information filling down rows. What I would also like it to do is see if im using a machine (because it can be turned off by changing the usage to 0%), and if I am, copy the results form the individual machine to the next worksheet. When it copies it needs to see if the first machine slot is open and if not the second and paste in the available location. I cant have a specific spot for each machine on the real worksheet cause there are maybe 100 machines and if 15 are used I only want the first 15 machine info slots filled and im gonna hide the rest of the columns. The way the columns fill also cant be like the rows where it looks for next available free spot. It has to only be for the specific range in red because there is info to the right of where this is going.
Sub Send_Data()
Sheets("Calculator Sheet").Select
Range("AD9, AE9, AG9").Copy
Sheets("output sheet").Select
Range("B65536").End(xlUp).Select
ActiveCell.Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
I would like it to scan an entire column (column E) for rows of data that fall into a range of numbers chosen by the user (like maybe a list box or combo box in sheet 1) for example a number greater than or equal to 8 but less than or equal to 15 and copy all of the rows and columns of data across the entire sheet that fit the range from sheet 1 to sheet 2. I would like to use a separate list or combo box for the min and max values in which to search as seen in the example sheet 1 attached. I have tried the autofilters, custom filters and macro recorder with no success as it seems the filters do not like ranges of numbers.
View 3 Replies View RelatedPlease see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies View Relatedi try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedThe initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
I have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
I would like to be able to count the number of rows with data and use it in a macro. For instance, Columns A:C and Rows 1:50 or more have data (the number of rows are variable). In Cell D1 I have a simple formula
Code:
=A1&","&B1&","&C1
I am using a formula in VBA like:
Code:
Range("D2").Select
Selection.Copy
Range("D3:D10000").Select
ActiveSheet.Paste
I don't want to have an arbitrary number like D10000 in the range because it will paste in cells even if there is nothing there resulting in a ,, in the cell. I know this is avoidable by wrapping in a
Code:
=IF(ISBLANK(A1)=TRUE,"",D1)
but the "" is not truly blank and jacks up the sorting.
If there is a better way by setting the row count to a variable like
Code:
countx=COUNTIF(A:A)
and then using it in the selection such as:
Code:
Range("D2").Select
Selection.Copy
Range("D3:countx").Select
ActiveSheet.Paste
Am I going out about this wrong, maybe missing something fundamental about this?
get this macro to paste the formula across to a variable number of columns? It is falling over at
VB:
Range(Cells(5, .Columns.Count)).Paste
VB:
Sub Clear()
'
With ActiveSheet
[Code]....
I'm trying to come up with code that will allow me to take numbers arrayed as follows:
25
25
42
42
[Code]....
The number of rows and columns are both variable.