How do i split some text in range if it does not have a delimiter? I would like to have a comma after each letter/number or have the option to split to individual cells
I know how to use the vba split function with a delimiter but cant figure this out.
I.e susanna
S,u,s,a,n,n,a.
I am looking for a solution to split text from numbers.I have found a couple examples on the web but I cannot get the examples to work with the correct syntax to function.
Sample cells. The string could be any integer or floating point number with text. (The text is always after the number.)
1234txt
12.222txv
102.1hknn
Result needed
col1
1234
12.222
102.1
col2
txt
tvx
hknn
I want to split the contents of a single cell(ALT Enter as delimiter) into multiple cells and retain the values in column B.
Ex:
A1: apple
banana
car
house
A2: yellow
B2: building
x
y
B3: O
Output:
sheet 2:
A1: apple B1: yellow
A2: banana B2: yellow
A3: car B3: yellow
A4: house B4: yellow
A5: building B5: O
A6: x B6: O
A7 B7: O
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc.
A2: A. Bellotti
A3: A. DEPPELER S.A.
I have a column with cells that look like: XYZ - JobABC - Area 1-A. I'd like to split the column into to and have it look like: XYZ <next column> Job ABC - Area 1-A
Normally I'd use the text to columns function and "-" as delimiter, however, there are other instances of "-" which I do not want separated. Note that the XYZ can vary in length and therefore fixed width will not work either. I have attached a small sample with the different variations that I could encounter.
I'm prepping this file to be pushed through mail merge. The sheet has 25,213 rows.
Column I contains a long string of character (for the purposes of my project the field is called Subjects) and $ used as delimiters (approx 70 or as few as 1). This column needs to be split apart by $ and the separate Subjects that result from splitting apart by $ needs to be placed on a separate line. Once each Subject is on a separate line, all of the Subjects need to be lined up in Column I, one under another (the obvious result at this point is GREATLY increasing the number of rows in the sheet). Next, all of the data that is contained in each Subject's originating row will be copied to each of newly created rows (without copying over the Subject contained in column I).
After writing this all out, I realize (once again).
I recently got this task by my work employer to transfer information from several non-organized Excel-documents into one, complete and organized one.
The thing I have to organize right now is a column with thousands of zipcodes and zones in one single cell, only separated by spaces, like this:
Zipcode Zone
115 54 Gothenburg
443 67 Skane
What I want to do is instead of having to go through 24h of braindead control/paste is to use some easy and fast function or script that could pull out the last piece of string of information in every cell in that column into its own separate cell.
Although I am using Open Office Calc/Gnumeric on Ubuntu Dapper, if a script is necessary and only work with Excel on Windows/Mac, that is no big problem for me to solve. So please, any suggestion is welcome.
I will attatch two examples for you to look at, to get the whole picture.
I have one column in a worksheet that I want to split into 2 columns. If there is one "(" in the cell, I want to split at that point, but if there are two "(" 's, I want to split at the second occurrence. I can use the Like operator to identify the cells, but is there a way to specify which delimiter in a sequence of identical delimiters to split at? Here are templates (not actual data) of the two type of cells:
Name1 (ABC) (Name2, Name3)
Name4 (Name5, Name6)
For the first, I want to split on the second "(", before Name2, and for the second, I want to split on the first "(", before Name5.
I've got a column of data containing addresses. What I want to do is split the column after certain keywords such as "street", "road", "close" etc and move any words that come after these in the cell into the next cell to the right.
For example, in one cell I might have "54 Burberry Road Finsbury London"... what I want to do is have part of the text remain in the original cell i.e. "54 Burberry Road" and the rest, "Finsbury London", moved to the cell on the right.
Not all cells in the column will match this format so if it doesn't find a keyword, nothing will occur and it will move to the next cell down etc. until it reaches the end of the column.
There are no delimiters (apart from the spaces) between the words.
I haven't figured out all of the keywords that I will need to search for yet but I should be able to extrapolate from something fairly generic.
My excel database sheet contains inventory of products and quantities, each is defined in the form of combined number followed by text without a delimiter. For example 2AWS means Two (2) of AWS.
Each cell of the inventory field may contain up to two products, each product is identified in the above format; but the pair of products are separated with a comma.
The inventory field is occupying from cell $A$2:$A$5000; and is defined as a named range "INV_QTY" with scope within the entire workbook. I need to calculate the total inventory for each product.
Here's an example:
Cell A2: 3GFG, 1AWS
Cell A3: 2NG, 2AWS
Cell A4: 3AWS
Cell A5: 4QLK, 4GFG
etc.
The desired output should be calculated as follows (assume Input will be on Column C & D)
Product - QTY
GFG - 7 (i.e. Cell C2: GFG , Cell D2:7 etc.)
AWS - 6
NG - 2
QLK - 4
I need to organize some unorganized texts in my columns.Here is what I have in the column:
STARMERBRIEANA 134 CRICKLEWOOD AVE HENDERSON,NV 89002 CLARK Home - ( ) - Work - ( ) - Ext.
Here is what I need it to look like:
Column B = "134 CRICKLEWOOD AVE HENDERSON,NV"
Column C = "89002"
I have tried experimenting with LEFT, RIGHT functions. I want to edit a text string using a delimiter. For example: "NOS|NOS". I have a column of 256 rows of such entries, a name; the pipe; a name. I need to be able to strip out one side or the other using that pipe as the delimiter, leaving only "NOS". With 256 rows of items with this format - the length of the text string will vary.
View 3 Replies View RelatedI have a text file, which is been imported to excel sheet. There are 2 fields in the text file. Each field has to be placed in one column. The first field has values with space. Due to this the first field is split into 2 fields and totally 3 columns are imported in the excel sheet. Have set .TextFileSpaceDelimiter=True so that it would split the 2 fields, but since the first field has space in it, it splits into 3 fields. Is their any alternate way to obtain the above?
View 4 Replies View RelatedI have a script to import all the data in a text file into an excel sheet. However, the data that is imported are in the first column of every row.
for e.g.
123454566788329929201012827192019128278111111111abc213123123123123
there is no comma nor / to separate the string of alphanumerics is there any vba script that i can incorporate to separate the first 3 digit in the first column then 5 digit in the second column then 7 digit in the 3rd columns and etc.
I have an excel column that contains the vbnew line box between two pieces of data. If I want to do text to coulmns how do I choose the vbnewline as the delimiter?
View 5 Replies View RelatedI have one table in word format and a sheet in excel:
word table:
Part # ID
1001 C1,C5
1002 C2~C4,C6-C7
1004 A10
excel sheet :
ID Color part #
C3 white
C1 blue 1001
C2 red
A10 black
C4 red
C5 greed 1001
C6 grey
C7 pink
I need to write a script which will take an id in excel sheet , then look up the part number in word table , copy the part number into excel sheet. So the sheet will look like this:
ID Color part #
C3 white 1002
C1 blue 1001
C2 red 1002
A10 black 1004
C4 red 1002
C5 greed 1001
C6 grey 1002
C7 pink 1002
at the end, I need to export the sheet as text file with tab as delimiter
Is this possible using VBA?
I am having a problem reading from a file. I am working with some old code. I am reading information in from a txt file. The information on the txt file is separated by commas on each line. My question is, how can I read in for example, the third section on the first line. By section I mean...
line 1:
section1, section2, section3, section4, section5
I want to read section3 into a string variable. If anyone can help me please post. I am having the hardest time finding this online.
I frequently review DAT files. These DAT files use a variety of characters as delimiters. I'm trying to devise a macro that will perform a text-to-column operation, using the content of a specified cell as the delimiter.
Here's my code, which uses - (ASCII 0254) as a delimiter:
Code:
With Sheet1
Range("A1", ActiveCell.End(xlDown)).Select
Do
[Code]....
Instead of having the delimiter hard-coded, I'd like my macro to use whatever character I enter into Sheet3.Range("i5") as a delimiter. That way, I can easily change my delimiter character as necessary.
I have a listbox populated with a number followed by description. How do I write code to extract the number and description to different cells. Listbox example: "1234ES - Project Description". Now I want "1234ES" in one cell and "Project Description" in cell left of number.
View 2 Replies View RelatedI am trying to convert text to rows but in the same column Take the following example:
Column A:
1-2-3
ab-cde-fg
54-ty-12345
the
waht i am looking is convert it to the following format: (the - is the delimiter)
Column A
1
2
3
ab
cde
fg
54
ty
12345
i have found the following VBA code on those forums but i don't know how to edit it to suit my needs
Sub Txt_To_Rows()
Dim arrText() As String
Dim varItm As Variant
Dim rngText As Range
Dim rngCl As Range
Dim i As Integer
Dim j As Integer
Dim x As Integer
Set rngText = Range("A1:A" & Range("A" & Rows.Count).End(xlUp).Row)
j = 2...........................
I'm currently trying to compare all of my companies data sources for staff, ie helpdesk, telephony, ldap etc. and I have made quite a bit of progress, mostly thanks to this forum, however one issue I am running into, is the fact that when I use the text to columns funtion (in a macro) it's splitting up names which are double barrelled into 3 columns. The names are in the format of...
View 2 Replies View RelatedI have names that look like this:
SmithJohn and i want to seperate into two cells so it looks like
Cell 1: Smith
Cell 2: John
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
Actual
Result
london#123;new york#34;
london;
new york;
delhi#145;chennai#54;
delhi;
chennai;
hyderabad#748;
hyderabad;
[code]....
removing the # and numbers from text and add new line after ; symbol. So it would save me a lot of time in preparing status.
I have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5
I'm trying to take a large text file and break into smaller text size files. I want to open the data file, and parse into 5000 line smaller files.
Here is what I have based off of some MS KB
Sub LargeFileImport()
'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
Dim CounterMax As Double
Dim sPath As String
Dim FileCounter As Double
'Output File
I am trying to write a micro code to split text which is copied into cell A1 into columns. I can do this fine by going to "data" the "text to Columns" and selecting the places i want to split the text (this is the same for every piece of data i copy in).
The macro works perfectly every time. the problem is that the spreadsheet is shared and i want to protect certain cells on the sheet, when i protect the sheet the recorded macro does not work as the "data", "text to columns" is not available in a protected workbook.
I was just wondering if someone could help me, so i can run a macro to split the text which also allows me to protect cells. In the "text to column" option the "fixed width" (column breaks) i choose are: 4, 25, 34 and 43.
I have in one column first name space and then surname. I want to divide it into two columns 1 for the first name and 2 for the surname.
View 2 Replies View RelatedI am having quite a bit of a challenge here and am not able to code to split the text into columns. The text to columns does not work here unfortunately. Below is my situation. In one column that has the contract details I have the data as follows:
Account Manager Jennifer MacFarlane CONSULTING - GENERAL on 20-JUN-13 Function #:176749
Account Manager Janet Bewers CONSULTING - GENERAL on 25-JUL-13 Function #:176878
Account Manager Janet Bewers HEAT STRESS AWARENESS on 27-JUN-13 Function #:176828
Account Manager Janet Bewers TRACTOR SAFETY AWARENESS on 08-AUG-13 Function #:177383
What do I key in to get Account Manager in one column, the name of the person in another column and the one in caps in another column and the date in one column and the function in another column. I tried using left, right and LEN and something is terribly wrong with my logic
I currently working on an excel report that contains a sheet with the following data in one column.
GARLAND CRAIG mr 850
GARLAND CRAIG ms 850
HARTSHORNE JANE mrs 965
ROBINSON RACHEL master 3687
I would like to split the names from the title and the id number and place them in three different columns one for name,the other for title and the third for id number.Is there a formula that could do this.
