Subtract Cells And Add Up Differences In Last Cell As Total

May 30, 2014

EX:
1200
1205
1210
1215

Cell with total should contain 15

These are mileage numbers. At the end I need to know the total miles driven as miles are added. I need to be able to see the total miles driven as mileage is added. At the end of the week, I need to see total miles driven.

View 7 Replies


ADVERTISEMENT

Subtract Cell From A SUM Total

Jun 29, 2006

would like a very small macro for the following:

Units units remain day 1 day 2 day 3 ... day 13
MACRO

The units are the total number of units that can be bought ( in a game) and these are purchased on a daily basis.

I would like a column " units remain" as units are purchased to just count down auotomatically as numbers are entered into the daily row.

Thus:

11 xx day 1 day 2

Where xx would chage as numbers are entered into day 1-13 ( these will be either 1 or 2).

View 4 Replies View Related

Subtract From Set Figure In One Cell Once Another Cell Total Reaches Zero

Feb 27, 2013

formula which uses 4 cells

the 4 cells are

Cell B2 - this is a set figure which is the initial base figure - currently set to 43
Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)]
Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total.
Cell D2 is a set figure of 49

The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.

View 5 Replies View Related

Add Or Subtract From Total

Feb 20, 2010

CELL A1=45

I want CELL A2 to be a blank cell which people can enter a number in that will decrease the value of A1 and once that value is entered, it would return to a blank cell. CELL A3 would be used in the same fashion except to increase the value of A1

what would a formula for this look like?

View 10 Replies View Related

Subtract From Running Total?

Aug 24, 2014

In cell A1 i have a total amount, lets say it's 20, in B1 i have a value of 5, in C1 i have 10.

Looking to see if it's possible to take the 5 from cell B1 to make A1 = 15, then 10 from cell C1 to make it 5 in A1 whilst reducing both columns B and C to zero If B1 or C1 are greater than the value in A1, A1 displays that amount that would be left

only thing i can think of is a hidden column to calculate whilst incorporating an if statement into B & C?

View 1 Replies View Related

Subtract A Percentage From Total?

Jan 9, 2014

for example:

Period Revenue 5% 10% 15% 20% -5% -10% -15% -20%
$72,003.33 $75,603.50 $79,203.67 $82,803.83 $86,404.00 $68,403.17

View 1 Replies View Related

Add / Subtract From Total With Userform

Feb 16, 2014

Is it possible to add to or subtract from the value of a cell with a macro? For example, lets I have a cell that contains the number of nails in a drawer (200) and I needed to remove one. I enter the number 1 in a cell and hit the remove button. The cell that contains the value of total nails would then be one less (ie: 200-1=199).

If I used a user form for something like this what would the vba look like?

Also, I realize that this would probably be easier with Access however, I do not know Access very well at all and the number of items I have to do this with would not warrant a database.

View 2 Replies View Related

Running Total VBA - Add / Subtract Number In B And C?

Apr 10, 2014

I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.

Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)

Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)

Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.

Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.

Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.

Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)

So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.

View 2 Replies View Related

Xlup And Calculate - Take Value Of Total And Subtract It From Subtotal

Dec 7, 2011

I have several columns of sub-total and total as shown in the screen print. I need some code that will allow me to take the value of total and subtract it from sub-total. The number of rows changes weekly so I cannot simply state =f10-f11

I thought xlup and offsetting would be a good way to do it, but I'd still need to assign a cell number.

View 1 Replies View Related

Formula To Subtract Invoices From Total Amount Available

Sep 25, 2009

I have 2 tables, one with invoices, the other with purchase orders. I would like to have a "PO Amount Remaining" column on the invoice table that looks up the PO listed on the invoice with the PO $ amount on the PO table. Once it is matched, I would like to subtract the total invoices to give me the amount of the PO that is left. Basically I would like the "PO Amount Remaining" column right now to have $4,200 listed in each row for invoices 1 & 2.....

View 18 Replies View Related

Subtract Date & Time To Show Total Hours & Minutes

Oct 13, 2007

How can I work out the following in hours an minutes: -

Cell A1 = 12th May 2007 20:00
Cell B1 - 14th May 2007 14:30

or should I put the dates and times in seperate cells? I would like the answer to show 42 hours 30 minutes

View 3 Replies View Related

Pivot Table Calculated Field To Subtract Sales Between Two Periods (not Grand Total)

Sep 1, 2011

'Pivot Table Calculated Fields" - Below is my pivot table.

I need the pivot table to subtract 'February' sales figures from 'January' sales figures to get the difference (variance).

I know the following steps:

1) Click on the Pivot Table

2) Choose "Formulas"

3) Choose "Calculated Field"

4) In the "Name" field - type in the name that I want "Two Month Variance" (for example)

5)......then I don't know what to do

Sum of Quantitymonthsupplier idjanfebGrand Total
754466163150842519337568263901785022875682639410025035075682639500
75682639642523866375682639780012492049756826398209209756826399292292
756826400264264756826401178178757494037292292761034919209209867233456264264(blank)
Grand Total245154236931

View 9 Replies View Related

Total Percentage Of True Cells Compared To Total Number Of Cells

Jun 9, 2014

I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.

View 9 Replies View Related

Subtract Amount From Cell Until It Reaches 0 Then Move And Subtract From Next Amount?

Apr 28, 2012

I am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.

AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?

View 6 Replies View Related

VBA Code To Subtract Data In 7 Paired Cells To Be In New Cells

Jun 6, 2013

My data is like this

A
B
C
D
E
F
G
H

[code]......

now i want after the last data column to put formula "= ROUND((C2-D2)/100000,2)" in S2 similary "= ROUND((E2-F2)/100000,2)" in T2 using VBA till all data colimns upto column R are used in subsequent columns

I tried following code

Sub tot()
' This subtracts credits from debits and divides by 100000
Application.Goto Reference:=Range("s4")
Dim dr, cr, clmn, ansclmn, cln As Integer
For ansclmn = 19 To 26

[code]....

View 1 Replies View Related

Find Differences Between Two Cells Excluding Some Text?

Sep 4, 2013

I have two lists of data as below, and I want to find a match after excluding "Ltd" or "Limited"

example

If Cell A1 is "ABC Limited", and Cell B1 is "ABC Ltd"

This should show as a "match", otherwise it should show error.

View 1 Replies View Related

Compare Cells In Different Workbooks & Highlight Differences

Dec 6, 2007

I am trying to find a way to compare the cells (example: D4:D12 to the same cell range in another workbook. If the value in D4 is less than D4 in workbook 2 highlight it red and if it is greater highlight it green. I also want a loop to go through the specified range. Of course, the scale of the worksheets is much greater.
Another issue I foresee, is that the workbook name that I am comparing to changes every week, so is there a way to handle this change easily?

View 2 Replies View Related

Total Up Cell(M) If Cells(A,B) Match TextBoxes

Jun 21, 2006

I have 2 TextBoxes (TB1 & TB2) in which a store name and a date are entered. The sheet has many store names and many more dates(shop at the same store on different days). I am trying to get the total of columns L, M & N if TB1 = Column A AND TB2 = Column B. I know where to place the code (in the exit event of TB12(L), TB13(M) & TB14(N)). I have added sample data and updated my sample to make it easier to see what I am trying to do. Can anyone show me how to match up these TextBoxes and cell values or give me a hint as to how to proceed?

View 6 Replies View Related

Compare Excessive Text In Two Cells And Show Differences

Jun 19, 2014

Is it possible to compare code that's in two cells and show the differences? It's possible with Notepad++ and an extension but I have hundreds of pages to examine weekly and it's not efficient to do it manually.

View 1 Replies View Related

Highlight Differences Of Cells In Multi Column & Row Table

Mar 20, 2009

PART 1
- A record is created
- The record is modified once/several times
- Only the original record and the last modified record needs to be kept

PART 2
- The differences between the original and the last record need to be highlighted in the spreadsheet.
- This has to be repeated for a whole bunch of rows

Currently I am manually deleting the rows and eye-balling the changes. I'm using Excel 2002. I have ASAP Utitilities as well. Although macros are cool, I was hoping I could try with an Add-in or software.

View 9 Replies View Related

Subtract From Two Cells?

Jun 23, 2014

im trying to subtract from two cells. see below

i have two cells, lets say A1 which has number 10 in it, and cell B1 which has -1 in it, but when i use this formula in cell C3 =sum(A1 - B1) It add it on when there's a minus sign in front of the number is there a way around this?

View 2 Replies View Related

Date And Time Differences With Blank Cells And Monthly Totals?

Jan 30, 2014

see the attached workbook with two different sheets (same data) using different formulas. Each has problems (red text) preventing me from moving forward.

I need to calculate time in level 1, time in level 2 and total time for each row and then be able to sum for the month. Unfortunately, sometimes there is missing data, but I still need to calculate everything possible using a consistent formula that can be applied to the column/row universally.

View 3 Replies View Related

Subtract Cells From Different Workbook

Jun 26, 2014

I'm trying to subtract the same exact cells (position of the sheets) but from different workbooks. Here is my code that is definitely not working...

[Code] ....

View 4 Replies View Related

Match Two Cells And Subtract

Aug 6, 2008

My workbook has 3 worksheets in it, Data Entry - Components – Jobs. The first worksheet contains 2 buttons to enter new data via user forms. The second worksheet has 3 columns in it, component code, date, quantity and they are populated via a user form. The third worksheet has 4 columns, component code, date, quantity and Job number and it is also populated via a user form. When a person enters the data into the job user form and then clicks the command button to add it to the spreadsheet I need it to also find the matching code in the component worksheet and subtract the job quantity from the component quantity. So if the component worksheet has Envelope1 with a quantity of 25,000 pieces and I enter a job that used 10,000 of Envelopel1 the component worksheet would be updated and only list 15,000 pieces.

View 2 Replies View Related

Subtract 4 Hour From All Cells In A Column

Mar 15, 2014

I have a column of times that are formatted 12:30:00, 14:02:00.....so on and so on. I want to convert these times to be 4 hours less than what they are. Is there a formula I can put in a cell somewhere that will do this for me?

View 9 Replies View Related

VBA To Subtract Cells If Negative - Row Number Change With Loop

Apr 26, 2012

I have a database of over 200,000 parts

In this database i have cost and sale price. 20,000 parts have the numbers backwards.

if you loop the rows you can subtract =SUM(AE2-Y2) if that number is a negative number I would need the value of AE copied to Y2 and the value of Y2 copied to AE2. the 2 being the row number which would always change with the loop.

View 3 Replies View Related

Date / Time - Subtract Number Of Days Between Cells Only

May 2, 2014

I have a cells with a date and time in each cell. I want to subtract the number of days between the cells only. Is there a way to do that with the time in the cell? If not, how do I remove the time in each cell?

View 5 Replies View Related

Match/Index Formula :: Multiply Last 3 Cells In A Row And Subtract 1

Sep 23, 2009

I am having a little trouble with multiplying a few formulas. I am looking for a formula that will multiply the last three cells in a row that contain data and subtract 1. Below is an example of the type of data I am working with and the formula I am trying to use but is not working. The formula is for the cell highlighted in red. Every quarter the last three cells being referenced will change.....

View 9 Replies View Related

Compare Two Excel Worksheets For Cell Differences?

Mar 8, 2005

This is a physical inventory process. An employee, using a barcode reader, will populate the cells of one column in a worksheet with asset IDs that are located at a facility. Once done, the employee must compare the cell values of the worksheet that he or she has populated to the cell values of the inventory roster. The desired outcome is to produce a plus/delta report based on the comparison of the two worksheets.

View 2 Replies View Related

Find Total Hours By Searching Entire Rows Below Selected Cell Versus Cells In A Column

May 19, 2014

I'm using the following code to delete select rows one at a time. I need the last row in the range to remain therefore I prevented the user from deleting the row one up from the row that contains "Total Hours" (which is always in Column B). The code works great as long at the user clicks into a cell in column B. If the user clicks into a cell in column A, C, D, E, F, G, H, or I then the code allows the user to delete the last row.

I believe I need to search entire rows to determine if the row contains "Total Hours" .

[Code] .......

Attached File : Staffing Report 1.44.xlsm‎

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved