Sum Duplicate Descriptions When Using Array?
Dec 5, 2013
I am currently using the below formula to extract various fields from a spreadsheet:-
{=IFERROR(INDEX(Funding_Stream_All_Data.rdl!$I$1:$I$999999,MATCH(1,(Funding_Stream_All_Data.rdl!$B$1:$B$999999=$C$8)*(Funding_Stream_All_Data.rdl!$D$1:$D$999999=$A19),0)),"0.00")}
Which would be fine if the description in column B of my data only appeared once.
How do I sum the total of all those that have the same description?
Data Example
Column A Column B Column C
Code Description Value
SL10107 Test Data £100.00
SL10107 Test Data £100.00
SL10107 Test Data £100.00
Using the formula {=IFERROR(INDEX(Column C,MATCH(1,(Column A=SL10107)*(Column B=Test Data0,0)),"0.00")} I get the answer £100, i.e. it is Matching the Code SL10107, and then matching the Description of Test Data and then returning the first value, £100. However I would like to sum these entries and get the answer of £300.
View 1 Replies
ADVERTISEMENT
Aug 25, 2009
I think I need a modified SUMIF formula but I can't figure it. The attached spreadsheet is a sample of what I need. I'm using Excel 2003.
View 3 Replies
View Related
Sep 16, 2009
I have a site that sells over 5000 products.
I have two sheets.
One is a Master which has all of the following information in each column.
Product ID = A, Product Name=B, Price=C, Category=D ,Product Description =E,
The other sheet Is a updated product description.
Now I want to Be able to copy and add the new descriptions into the Master but not sure how to add them so they will fall into the proper spot according to the Product ID... There are not descriptions in the Update sheet for all the Product IDs in the Master.
View 9 Replies
View Related
Aug 28, 2013
I have decriptions in Col B on sheet1. I would like a macro to do the following
1) Extract descriptions that contain the following text to sheet2 (including Cols A:B)
sale, sales, fact assist , discount, DIC & rebates, F & I (for eg sale pine desk, fact assist pine desk, discount retail desk, F & I sales)
2) Extract descriptions that contain the following text to sheet3 (including Cols A:B)
COS, O/allowance (for eg COS pine desk, O/allowance,
View 5 Replies
View Related
Apr 9, 2008
I have a chart which has two labels at the bottom under the x axis. Is there any way to remove these without removing the data?
View 9 Replies
View Related
Feb 13, 2013
So if I have the below array how can I remove the duplicate values?
myArray = Split(TextBox1.Value, Chr(13))
View 7 Replies
View Related
Sep 6, 2007
I have a range, 2 columns * 5 rows, populated with numbers.
I want an Array formula that it gives back
SMALL (Range, 1) ......
SMALL (Range, n-m), but WITHOUT DUPLICATES
n= 10 , m = # duplicates
¿FREQUENCY, OFFSET.....?
View 9 Replies
View Related
Jun 2, 2009
Is there a good way to find out after the exists returns True in which place in the array the Z is located in ?
...
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
Z = a(i, ii) & ";" & a(i, ii + 1)
If .exists(Z) Then
msgbox "The array location for existing Z value is ..."...
...
View 9 Replies
View Related
Oct 28, 2013
I have about 10,000 part numbers all with descriptions. These descriptions do not follow a uniform logic;
=============
Part 1: 5x10 Red Cotton candy
Part 2: Yellow 6/18 x7 TTC x11 Picture Frame
=============
My dilemma is that I need to figure out a way to remove everything aside from the "5x10" and "6/18 x7 TTC x11" from these descriptions. I just need the the item sizing.
What I've come up with so far is sorting items by description and working with batches of similar descriptions, then doing replace "Red*" with "blank". It works but it still takes me too much time and it's not perfect.
My question is there something else I can do that is easier and more accurate?
View 2 Replies
View Related
Mar 26, 2009
I got a formula from this forum to eliminate duplicate records in a array from 1 column in database. Now I would like to take it one step further and filter out records in the array that do not meet the criteria of being in a particular "Zone" selected by the user by clicking on a ComboBox from cell "AA18".
The first formula is copied to cell "C7":
View 6 Replies
View Related
May 21, 2013
I'm trying to write a formula which will return postcodes from a list of descriptions which aren't consistent in their layout.
For example, I need this to happen
UB3 3NQ - APR13
SW3 5RQ - APR13
Jul 12 - apr13 accrual - ME9 4FW
Mar 12 - apr13 accural - SO14 7P2
Returned to another column as,
UB3 3NQ
SW3 5RQ
ME9 4FW
SO14 7P2
The issue I'm having is that the postcodes aren't in the same place in order to use LEFT, RIGHT or MID functions, and they aren't always proceeded or followed by dashes or spaces in the same way.
I need the returned postcodes to come back in a uniform way so that any duplicates are grouped by the relevant pivot table.
View 4 Replies
View Related
Feb 9, 2010
I have a form for calculating costs of products ordered which imports quantity and descriptions from another sheet. The imported info and basic calculation of appropriate cost based on ordered quantity seems to work okay. These formulas are as follows:
First column: =IF(ORDER!A5>0, ORDER!A5, "") inserts the quantity ordered
Second Column: =IF(ORDER!A5>0, "Part Description and Part Number", "") inserts the product description
Both those formulas return a blank cell if nothing is ordered. Then using an outlying cell (G3) I enter the following formula to determine appropriate cost based on total order quantity e.g. $2.57ea if total ordered quantity is less than 50 and $2.37 if total quantity is greater than 50.. {Q: How do I put a third pricing level in here??}
=IF(SUM(A5:A27)>50,"$2.57","$2.37")................
View 2 Replies
View Related
Jun 12, 2014
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B
Company 2Country C
Company 3Country C
Company 3Country C
Company 5Country A
Company 5Country C
Company 5Country C
For example:
- For Company 2, a cell containing "Country B, Country C"
- For Company 3, a cell containing "Country C"
- For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
View 3 Replies
View Related
Aug 19, 2014
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx‎
View 1 Replies
View Related
Dec 11, 2008
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
View 5 Replies
View Related
Nov 1, 2007
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
View 9 Replies
View Related
Jun 12, 2008
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
View 3 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
View 9 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
Dec 20, 2013
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
View 4 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
Aug 5, 2014
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
View 8 Replies
View Related
Aug 26, 2009
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
View 6 Replies
View Related
Jun 21, 2014
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies
View Related
Nov 6, 2013
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
View 5 Replies
View Related
Nov 15, 2007
=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can
View 9 Replies
View Related
