Is there a good way to find out after the exists returns True in which place in the array the Z is located in ?
...
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
Z = a(i, ii) & ";" & a(i, ii + 1)
If .exists(Z) Then
msgbox "The array location for existing Z value is ..."...
...
My formula below work perfectly. I was wondering if their is a way for me to idenify the location of each row in which all the conditions are true. So, for example, if the formula generates an answer of 2, in a different cell it would give me the address of the 2 rows.
=SUM((K9:K72/L93))-SUM((K9:K72/L93))
=MIN(IF(B3:B32="",IF(A3:A32>0,A3:A32))) ArrayedOldest Date Array.xlsx
Following on from a previous post need to add to my (forums) array.
I need to find the location of a date which has been looked up in a cell based on the above formula which is in the attached.
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do...
Find MIN in Column F
After finding the MIN in F (let's pretend F222 is the current min)
Show the text in the field next to it (in this case display text from E222)
I have a spreadsheet containing 3 sheets. MW01 (first floor inventory), MW02 (second floor inventory), and SEARCH.
The sheets contain a part number in one column and a shelf location in the second column. I currently have over 1000 parts listed and growing.
I want to be able to type a part number into a cell on my "search" sheet and have it return the shelf location of that part.
After I run Hlookup on a product, I would like two variables, Row and Col, to assign the actual row and column of the spreadsheet to the location in the table. I have a small worksheet/program that I have attached, what I am trying to do. The program works, but my code is very long for the little bit of information.
Sales.xlsm‎
I have a table with customers and their addresses (sheet2) and I need to find their GPS locations in sheet1.
I guess the logic would need to be something like this:
find CityName and StreetName in sheet1 where StreetNo is between minStreetNo and maxStreetNo return GPS X and GPS Y
with the formula or VBA code?
Example.xlsx
I am currently using the below formula to extract various fields from a spreadsheet:-
{=IFERROR(INDEX(Funding_Stream_All_Data.rdl!$I$1:$I$999999,MATCH(1,(Funding_Stream_All_Data.rdl!$B$1:$B$999999=$C$8)*(Funding_Stream_All_Data.rdl!$D$1:$D$999999=$A19),0)),"0.00")}
Which would be fine if the description in column B of my data only appeared once.
How do I sum the total of all those that have the same description?
Data Example
Column A Column B Column C
Code Description Value
SL10107 Test Data £100.00
SL10107 Test Data £100.00
SL10107 Test Data £100.00
Using the formula {=IFERROR(INDEX(Column C,MATCH(1,(Column A=SL10107)*(Column B=Test Data0,0)),"0.00")} I get the answer £100, i.e. it is Matching the Code SL10107, and then matching the Description of Test Data and then returning the first value, £100. However I would like to sum these entries and get the answer of £300.
I am looking for a VBA Code which will:
1. Search for a specific File.
The file will the same file (ABC.xls) BUT the user might want to change it by typing a new name & Extension in the first Inputbox.
2. A second InputBox (Drive & Path) should now Pop-up.
If it will be left empty - the search should take place throughout ALL the installed HDs.
If the user decides to minimize the search range he/she will type a Drive & Path, the search should reduce/constrain itself to the specific Path ONLY.
My task is to show its Path location in a MsgBox (or to show "file not found")
It might be a good idea if the code can be extended beyond presenting the Path to:
1. Open the Windows "Explorer" (or "My Computer") in the specific Path with the file being selected (marked).
2. Opening that file, in "Excel", upon finding it.
A 3 section, VBA, code will be more than appreciated.
So if I have the below array how can I remove the duplicate values?
myArray = Split(TextBox1.Value, Chr(13))
I have a range, 2 columns * 5 rows, populated with numbers.
I want an Array formula that it gives back
SMALL (Range, 1) ......
SMALL (Range, n-m), but WITHOUT DUPLICATES
n= 10 , m = # duplicates
¿FREQUENCY, OFFSET.....?
I got a formula from this forum to eliminate duplicate records in a array from 1 column in database. Now I would like to take it one step further and filter out records in the array that do not meet the criteria of being in a particular "Zone" selected by the user by clicking on a ComboBox from cell "AA18".
The first formula is copied to cell "C7":
Assume that I have in Sheet2 a list of CUSTOMIZED name.
[Code].....
Now in Sheet1, I have data in column A that has strings consist of the customized name.
For example
[Code] .....
What function should I use that could give me the result of the CUSTOMIZED name?
I was thinking of a formula i.e.
[Code] ......
Obviously, the above formula give me error. Even if it works, it'll not give me the customized name ...
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
I have multiple items in the similar column. I need to find the row number of the last one. For eg. In column B1 to B5 I have Apple in the first 4 cells and Mango in the last cell.
Apple
Apple
Apple
Apple
Mango
I need the Row number of Last Apple i.e row 4. How can I achieve that using VBA?
I'm treating a set of data in excel in wich I have three long columns of values. I need to find all sets of three equal values in these columns (for instance, I need to find all lines with 1,1,1 or 2,2,2 and so on). How can I make a programe to do this?
View 12 Replies View RelatedI have a selected row as my range. I want to check if a specific value ("*") repeats twice.
View 9 Replies View RelatedI have pasted an excel report that I need to find any duplicate information. For example they are seperated 2 sets of 4.
For example:
Column A and B is one set
Column C and D is one set
With column E is where I need a way to flag duplicate information with "yes" or "true" on that set
The same would need to have happen on the next column G thru J then M thru P finaly S thru V
******** ******************** ************************************************************************>Microsoft Excel - compare-v1.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutW1=ABCDEFGHIJKLMNOPQRSTUVW1Internet & DMZ Idns db-whipNamed.confInternet & DMZ Idns db-metroNamed.confDuplicates Internet & DMZ edns db-whipNamed.confInternet & DMZ edns db-MetroNamed.confDuplicates Integration idns db-whipNamed.confIntegration idns db-metroNamed.confDuplicates Integration edns db-whipNamed.confIntegration edns db-metroNamed.confDuplicates2zone 0.IN-ADDR.ARPAfile db-whip/db.0.0.0.0zone 0.IN-ADDR.ARPAfile db-metro/db.0.0.0.0 zone 0.IN-ADDR.ARPAfile db-whip/db.0.0.0.0zone 0.IN-ADDR.ARPAfile db-metro/db.0.0.0.0 zone 0.IN-ADDR.ARPAfile "db-whip/db.0.0.0.0"zone "0.IN-ADDR.ARPAfile "db-metro/db.0.0.0.0" zone "0.IN-ADDR.ARPAfile "db-....................
I have two columns of numbers (2003), some of which match. Each column is of a different length and is arranged in a different order. I need to find all the number matches between the two columns. I can sort them ascending numerically but the columns are still disjointed with only occasional number pairs being readily visible.
View 9 Replies View RelatedStill working on my New Supplier UserForm and need some more advice... When a user enters a postcode into the postcode textbox - called txt_Pcode - on the userform, I would like some VB code to look at the existing supplier's postcodes (on separate sheet "Suppliers") and if the postcode already exists then go to it so that the user can visually check whether the 'new' supplier exists and decide to continue entering the new supplier or not. Also, I would like this textbox to be a required field...
View 5 Replies View RelatedGot a workbook with 4 worksheets and sometimes we need to cut and paste a row from one worksheet to another, now thats easy now as we are all human and sometimes it gets copied and we have duplicate logs.
Now each sheet has usually not got that many rows in it, but that spreadsheet is getting sent to the highest people in the company and any mistakes look poor.
What i'm looking for is a way that i can highligh any rows that a duplicated in each worksheet. I can do it in each worksheet using conditional formatting with something like = COUNTIF($A8:$A$20,A8)>1. but don't know how to check that is not on any other worksheet. On every worksheet only need to check Col A for the duplicate information
I need to generate a form letter from values on another sheet. I'm using vlookup and as you know, for duplicate values, only the first reference is given. I have several duplicates and need to pull the correct row data for each instance. I would need to replace each vlookup with the proper formula in my letter.
sample file.xlsx‎
The background to my problem is that I'm trying to create a unique dictionary for a game I'm programming. I have imported the dictionary into Excel and need to manipulate it with the following conditions:
Word length can only be 3-5 characters longWord cannot contain special characters like hyphen or apostropheWord cannot have repeated characters
I got the first two criteria done using pretty brute for methods. The first using the LEN function to find words greater than 2 and those less than 6 and then comparing those two lists to get the list of 3-5 character words. The second I did manual search for characters and replaced them with six random characters so they would fail criteria 1 and be filtered out.
The last one I'm having problems figuring out. The game I'm programming only lets you use a letter once. So words like "dad" (or coincidentally enough "mom") would not be valid.
Is there a way I can look at the words in the cell and see if any character is repeated and then act upon that (e.g., copy to another column if no letters are repeated)?
I have a worksheet that tracks errors (10 different error types are tracked) that may occur on anywhere from 20 to 200 different jobs. What I need to be able to do is find all the jobs for any given day where a specific error has occurred two or more times for that day. Often a specific error will occured many times on the same job on the same day. What I need to end up with is only one row for each job that shows the Date/Time (m/d/yyy h:nn), JobNumber (number), ErrorNumber (text field) by either hiding or deleting those rows that do not meet the criteria.
View 8 Replies View Relatedsee attached sheet. Column A has File Name. Need to highlight the duplicate data as you can see there is 2 duplicate data which i have manually highted ( C19 is duplicate of C12, C83 is duplicate of C84).
View 4 Replies View Relatedhow to reference the drang (named range) and the cell propertly as i keep getting an error.
Everything in the below code works except the parts below in blue
details:
I have in column X lots of names and in column Y (dynamic column
anges as the users chooses them as per the code) and I want to loop through all names in 'X' and if there are multiple of the same names then for the corresponding 'Y' row entry of each be checked and if they are equal (same $ value) then for one of them of cells in the Y column to be cleared.
Basically if the same name appears more than once it will most likley have the same $ value and if i do a calculation on the $'s it will be 2,3,10 times the amount it should be, hence the need for this .
As per the below code I am trying to use 2 for Each loops though I keep getting an error when trying to reference the drng range which has the values in them..
formula to find duplicates and count only on instance of them.
image below:
Uploaded with ImageShack.us
As you could see on column A i have several entries,some of them duplicated. In column B i have a formula to check weather the value on column A is duplicated or Not. From this values i want to count only one instance of duplicated entries. I want to have one instance of Oscar to be counted as original and regardless the number of duplicates i want to count only 1. i want this not only for Oscar but for all the duplicates with more than 1 duplicate result.
I have a list of data that currently has a conditional format on it of =COUNTIF($F$2:$F2,$F1)>1 so that it will highlight the duplicate but keep the first entry blank. I wondered whether there is a way to identify the last duplicate in the list. i imagine this could be done in a column say with an "L".
View 7 Replies View RelatedI found a lot of information on this but not what I need. I have 8 columns A - H. Column D has some duplicate numbers. I would like to find the duplicate numbers in column D (they are all one right after the other) and delete the entire row leaving only the first. I do not need to sum or anything, just delete the row with a duplicate number. If there are 2 or 3, I just end up with one.
View 2 Replies View Related