I have a range, 2 columns * 5 rows, populated with numbers.
I want an Array formula that it gives back
SMALL (Range, 1) ......
SMALL (Range, n-m), but WITHOUT DUPLICATES
n= 10 , m = # duplicates
¿FREQUENCY, OFFSET.....?
I got a formula from this forum to eliminate duplicate records in a array from 1 column in database. Now I would like to take it one step further and filter out records in the array that do not meet the criteria of being in a particular "Zone" selected by the user by clicking on a ComboBox from cell "AA18".
The first formula is copied to cell "C7":
Rows 1 & 2 are on a single sheet - there are 26 counties in all, in alphabetical order and divided into IPF groups (as shown on row 1).
On a second sheet I have a data validation list showing IPF1, IPF2, IPF3... etc.
In the columns beside the validation list I would like to show just those counties in that IPF group (example in rows 4 & 6).
I require a formula that will show unique data in a specific rows or cells. Here are the data:
Raw Data
Col1
Row 1 A
Row 2 A
Row 3 B
Row 4 C
Row 5 C
The result should look like this (Note that the unique data are displayed in rows 6 to 8:
Col1
Row 6 A
Row 7 B
Row 8 C
I am currently using the below formula to extract various fields from a spreadsheet:-
{=IFERROR(INDEX(Funding_Stream_All_Data.rdl!$I$1:$I$999999,MATCH(1,(Funding_Stream_All_Data.rdl!$B$1:$B$999999=$C$8)*(Funding_Stream_All_Data.rdl!$D$1:$D$999999=$A19),0)),"0.00")}
Which would be fine if the description in column B of my data only appeared once.
How do I sum the total of all those that have the same description?
Data Example
Column A Column B Column C
Code Description Value
SL10107 Test Data £100.00
SL10107 Test Data £100.00
SL10107 Test Data £100.00
Using the formula {=IFERROR(INDEX(Column C,MATCH(1,(Column A=SL10107)*(Column B=Test Data0,0)),"0.00")} I get the answer £100, i.e. it is Matching the Code SL10107, and then matching the Description of Test Data and then returning the first value, £100. However I would like to sum these entries and get the answer of £300.
i have duplicate cell entries occuring. I have a column of about 8000 entries (Column B) and would like to have a cell at the top of my spreadsheet that displays where the first duplicate resides (Row No. will suffice).
At present i have a conditional format on dupllicates, but is is a big task to scroll down through all the data looking for them.
So if I have the below array how can I remove the duplicate values?
myArray = Split(TextBox1.Value, Chr(13))
Is there a good way to find out after the exists returns True in which place in the array the Z is located in ?
...
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
Z = a(i, ii) & ";" & a(i, ii + 1)
If .exists(Z) Then
msgbox "The array location for existing Z value is ..."...
...
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B
Company 2Country C
Company 3Country C
Company 3Country C
Company 5Country A
Company 5Country C
Company 5Country C
For example:
- For Company 2, a cell containing "Country B, Country C"
- For Company 3, a cell containing "Country C"
- For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I have data that is set up like this:
A1 B1
Apple Sweet
Apple Juicy
Apple Worm ridden
Apple Round
Apple Cooking
Apple Grannies
Pear Green
[code]......
and would like to combine all of the duplicates from A1 into one field, with all of the options in B1 combined into one cell (separated by a |). So the above table would read:
Apple Sweet|Juicy|Worm ridden|Round|Cooking|Grannies
Pear Green|Tasty|Mouldy
Orange Tangy|Tasty
Peach Rare|Forbidden|Expensive|Squishy
I need some excel formula to prevent duplicate cells in my excel file.
Case: I have one excel sheet with one column containing certain cell occupied with data (Eg: A01 to A30), Now i'm try to paste some more data in the consecutive cells (Eg: A31 to A40). The data i'm pasted second (Eg: A31 to A40) may contain some data from first pasted data(Eg: A01 to A30). I need to remove the duplicates. In this case after pasting 2 datas i can remove duplicates. But i want to prevent from pasting of duplicate data..i.e. while pasting the second set of data, a pop window should appear and tell me "these data are already present" etc..
Is there a way to use a formula to take an adjacent range of cells and duplicate all values so that the resulting range contains one duplicate of each cell.
For example A1:A5 is:
1
2
3
4
5
I need range B1:B5 to be:
1
1
2
2
3
3
4
4
5
5
without manually copying.
I have a list of items which I want to return the number of sheets in stock at the end of the month which uses a lookup.
My problem is though is that products can appear on the list more than once, therefore I need an IF formula which if it’s a duplicate (other than the first instance) I need it to appear as zero.
I have attached a spreadsheet which may be clearer than above.
Your notice on the spreadsheet the same product appears in 4 difference racks however I only need it to show once the total sold and total receipted. I have shaded in grey the desired result.
I'm trying to import an excel list into this database, but it does not allow duplicate names.
If cell A1= abcdefghij
and cell B1=abcdefghij
and cell C1=abcdefghij
I need a code that will compare A1 to see if there is any duplicates, and if there is i need it to see if the name is = or greater then 10 characters, if so i need it to be reduced to 9 and then have a "1" added to the name. then if there is 3 with the same name i would need it to add a "2" to the next one.
so the end result of the forumla would be
A2= abcdefghi1
B2= abcdefghi2
C2= abcdefghij (this one is left alone)
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
View 2 Replies View RelatedThere are many Software and Add-in and Macro or Code to Delete or Eliminate the Duplicate Data. But, I want to Delete The Duplicate BLANKS Row.I means to Say that
Delete Every Repeated Blank row Note : I Want to Use Formula or Function
Example
Hardeep
Blank
Renu
Blank
Blank
ABc
Blank.........
I am trying to create a column to match duplicate information, primarily numbers, so I can delete the duplicate information. Using the Find option is too time consuming. I am pasteing the new info above the previous weeks info. Some years ago I used a formula that would "Match" a range and I believe it would copy the duplicate in the empty column but it's been so long I am not certain nor do I remeber the formula. I've tried using the filter feature and looked at previous post but I am not familiar enough to know how to decipher the info given.
View 9 Replies View RelatedI have a long list of work items that is referenced by a unique 7 digit number. I need to create a formula to identify the specific work items that is being duplicated in the list and generate that number. Example is as follows
Work Item#
1234567
1234568
1234567
1234569
1234568
Based on the above list, I need to create a formula that generates all work items that is being duplicated.In the example above, the formula should generate the following work items:
1234567
1234568
does such a formula exist? I regularly Change a formula in cell C1. To Show my working I would like to have The formula from C1 written next to it as an equation.
Example: B1 | C1
=Text"updated from formula in C1 automatically" | =x+y*A2
Summarised, is there a formula to Display the formula written in another cell?
How to get correct value using vlookup formula in duplicate look up values.
Here i mentioned a eg;
VlookUp_DuplicateValue.JPG
In worksheet named, " My Overview", if the total sales values are a zero in C47:C59 the consultant name is duplicated in B47:B59 because of the values being a zero in C47:C59. How can i have the formula not duplicate this?
View 3 Replies View RelatedIn exceltip.com i found many solution of my problems
View 11 Replies View RelatedI need a formula (I'm not sure if its possible without using VB which I have found on another thread) that I can 'drag' down to the cell Bx (where x is variable) to extract unique entries in a list of values and then display them in a shorter, more concise list - like the 'Pick From List' function does but actually display these values in seperately in a column of cells.
Hope this is making sense.
So (hopefully) to elaborate:
A1:Ax = The list of values containing duplicates
B1:Bx = The list of only unique values from column A
I have a long list of work items based on a 7 digit number. The work item is referenced by a code named DS or WU.Example as below and the work item# has duplication throughout the list.(work item # repeated)
Work Item DS/WU
1234567 DS
1234568 WU
1234569 DS
1234562 DS
1234567 WU
I need to create a formula that counts how many duplications of work items, by the number of DS or WU. Based on the above example, the formula should arrive at the results below
Work Item #of Duplication DS WU
1234567 2 1 1
I have used excel to create a set of timesheeets and a total page, on the total page there is a column that will show you any varience on your hours each month (I.e if you have worked overtime or under your hours)
I have used the formula =(worked+hours+sick)-(weekly hours*week in month)
This works fine the only problem is in shows a minus number until the hours for that month have been entered so I cant create a total column, is they any way to get these numbers to show 0 until the times are entered?