Sums The Values In A Range Only To The Date
Dec 19, 2008Need to write a formula which sums the values in a range only to the date we mentioned. For ease sample date & requirements are highlighted in attached spreadsheet.
View 3 Replies
ADVERTISEMENT
Function That Sums The Values In A Range In Excess Of 2
Jan 14, 2009I am trying to write a function that sums the values in a range in excess of 2. For example, if the cell is 3 add 1, if it is 5 add 3 etc.
Here is what i have so far, it compiles with no bugs, but it does not work in my worksheet. I wrote it in Sheet 1 (VBA) of the worksheet i am using it in.
Transfer Sums In One Column Based On Date To Another Cell
Dec 24, 2009Attached is an example of what I am trying to do.
I am looking to transfer the sums for a calendar month in one column to cells in another location for each month.
I put some notes in the sample attached, I appreicate any help getting this to work.
Create A Formula Which Sums The Values Associated With Several Defined Names
Aug 6, 2007I am looking to create a formula which sums the values associated with several defined names. For example, I have a workbook with the following defined names SalesPerson1Total, SalesPerson2Total, etc. and these amounts are all sourced from multiple tabs. The amount of defined names (i.e. 'SalesPersons') is variable, therefore, I want the formula to read Sum the values of all defined names which are named with the following convention 'SalesPerson(X)Total'.
View 9 Replies View RelatedMacro-generated Values Not Updating Charts And Sums
Jul 5, 2006The question is pretty much described in the post title. Here is the situation:
I have a workbook that has data plugged into it manually throughout many sheets, and at the end there are a few sheets with different graphs and charts that are generated by a macro. This macros works perfectly - all the data is accurate and the figures are perfect when compared with a manual count. The problem I have is that the cells where the macro puts the summed values are in a chart that is supposed to create a bar graph. Normally, if I change a value that a bar graph uses I see the bar graph change - but that does not happen with the cells that have values placed in them by the macro. I also have a section that sums the values in the chart to make sure it's running right, and these values do not update automatically as well. The cells have the formula =SUM(B3:B12) and so on, in them. Right now, every time that I run the macro I need to go into the cell with the formula, hit 'enter', and then it does the summation. Is there a way to correct this problem, or is this something that is part of excel?
How To Create Sums Of Columns Based On Date And Category Criteria
Nov 1, 2011 I have spent a good amount of time trying to create the below using botched IF functions, SUMIFS, SUMIF formulas etc.
Basically I have a sheet (called Sheet1) with the following columns:
A - Date (by individual day DD/MM/YYYY)
B - A catagory (so using the old example, Apples, Orange, Pears)
C - Price.
I would like to be able to create a formula, whereby I can sum the Total sales for each catagory across each month onto a summary sheet (sheet2).
I would use pivot tables, however am not sure how i can make all the require data appear permanently in the best way, especially if there is a one liner that can be done more easily. So far I have managed to create a sum dependent on month, but have been unable to encorporate the catagory.
Pivot Table Filtering - Display Sums By Date Horizontally And Not Vertically
May 14, 2013I am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
A Formula That Searches A Range And Gives The Sums Of The Adjacent Cells!??
Jun 23, 2009I am looking for a formula that searches a range of data and then returns the sum of the numeric values in the adjacent cells. I have a calendar style spreadsheet with 2 columns for each day. In the first column it has a list of names and the second column a number.
I would like a cell to return the sum of the numeric values next to each name. All the names are entered into the columns randomly and are unorganised. The same name will appear multiple times in the range and have different numbers next to it each time. I am currently using (for example) =COUNTIF(H6:AL14,"bob") to tally up the number of "bobs" but really what i want to do is find a formula that in plain english does:
Search a range of columns and where cell = "bob" take the value of the adjacent cell (to the right) and total them up!
i have attached an image - i hope it makes sense what i'm trying to do - i would like Q3 to total up the numbers to the right of all "bobs" across all the days - so it should return 42
Divided Sums Of 2 Columns With Denominator Changing Based On Blank Values In Column
Dec 31, 2013I am trying to create a sheet on docs.google.com that takes the sum of 1 row divided by the sum of another row removing numbers from the denominator if fields are left blank. Hard for me to explain so here is an example:
Counter
Column 2
Column 3
[Code]....
Leaving a blank value in column 2 makes it read 4/6 giving me 66%, Column 3 giving me 50%.
What I would like it to do is if there is a blank value in any column remove column one from the denominator.
Upon completion the total output percentage for column 2 should be 100%, and column 3 should be 75%.
How To Calculate Average Of Values Against Selected Date Of Each Month Within Date Range
Jan 2, 2014I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
Sum Of Values From A Date Range
Nov 9, 2009I'm having a problem with a formula I'm using to sum the values within a certain date range. They have to meet certain criteria also, but I have that part of the formula worked out already. Here is the formula I am using, with the part I believe is the problem in red: ......
I searched around and tried replacing the ",--" with asterisks, I tried holding CTRL+SHIFT and pressing ENTER to activate it, and I just can't figure it out. Anybody understand what might be going wrong?
Macro To Sum Values Based On Looking Up Value Within Date Range
May 19, 2014I have a VBA or function query.
I have a spread sheet with the following.
Column A contains asset names
Column H to JZ contains cash outflows for each asset
Row 17 contains a Month&Date value (ie. July2013)
What i want to do is, from another sheet, is to calculate the sum of all cash outflows for the asset (determined by a cell value) for a date range entered. In other words, if i say 1/7/2012 to 30/6/2014, it will look the asset up, and sum the value of cashflows, in colums that fall between those dates for that asset.
Sumif Counting Values In Date Range
Jun 27, 2014I'm currently using the below formula to calculate the values within a certain date range.
=SUMIFS(C2:C100,B2:B100,">=2014-06-27",B2:B100,"
Minimum And Maximum Values Within Specific Date Range
Sep 30, 2009I have a table of dates and values and would very much like to know a formula for returning the min and mean values for each column within a specified time (date) period.
Table is as follows
Date value(a) Value (b) ....
1/1/09 10 8
2/1/09 8 6
3/1/09 5 2
Counting Occurences Of Values Relating To Date Range
Oct 18, 2009i have a spreadsheet that contains a column for each day and i need to input the count from another tab for certain data...example as follows:
column A shows types of fruit - apples, bananas or oranges, row 1 contains the date (todays date, weekdays only) - the count of each fruit needs to be entered in rows 2 (apples), 3 (bananas) & 4 (oranges) for each fruit for each date
i copy and paste a daily report into a new tab in this workbook -Raw Data (the data is always in the same format and the info i need is in column J...."555" = apples, "666" = bananas & 777" = oranges)
i have used the below formula which works:
apples =COUNTIF('Raw Data'!$J$5:$J$65536,"555") etc
however the daily report that is pasted into the Raw Data tab only relates to the current day (date is present in this tab in A1)...how do i get each daily column to only display a count if the date in row 1 matches the date in Raw Data tab A1?
also how do i keep the previous days' data to keep what the count was for that day (instead of counting the current count of the new data only relevent for today)?
How To Count Number Of Positive Values For Date Range
Jan 24, 2013I'm trying to count the number of times a payment is made within a certain set of dates. I believe that I should be using a countifs function, but I'm not exactly sure how to program it. I have a number of months, say the last 12. And in each month a payment is made or it isn't made.
View 6 Replies View RelatedCounting Unique Values Within Date Range Formula Error?
Aug 21, 2013I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
Counting Unique Text And Numeric Values With Date Range
Oct 3, 2011I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
Find Date Chosen From Calendar & Copy Range And Paste As Values
May 23, 2009I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
Extract Unique Values From Column B Between Date Range Textbox1 And Textbox2
Jul 3, 2007Sheet1 has following two columns
----A----------B
01-07-2007---10
01-07-2007---20
02-07-2007---30
02-07-2007---40
02-07-2007---40
03-07-2007---60
03-07-2007---70
03-07-2007---70
03-07-2007---90
04-07-2007---100
04-07-2007---110
Sheet2 has following three cotrols
Textbox1=02-07-2007
Textbox2=03-07-2007
combobox=?
I want to Extract Unique values from column B between date range textbox1 and textbox2 and finally how to add these unique records in combox1
How To Auto-Populate Date Range (working Days Only) From Start Date And End Date
May 25, 2014I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedHighlight A Date Range If Today Date Falls Within That Range?
May 1, 2014I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies View RelatedDate Range: Reference A Single Date And Output Date Ranges
Oct 11, 2008I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
Sums
Feb 21, 2009Deciding to try and get to grips with Excel for basic accounting, I'd just like to check some things before I start filling columns... Say in column D I have a list of names, and in column E I have a list of figures: John Smith £250 Harry Davis £350 John Smith £500 What would be the formula for finding all occurrences of John Smith, and adding up John Smith's figures to give a total? In the simple case above, the answer would be £750. Would it matter if there are any empty/blank rows in the list?
View 9 Replies View RelatedMultiply Values In A Range, Skipping Some Values On The Middle Of The Range
May 30, 2009I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
Ifs Ands Sums
Feb 21, 2008I have a list of tenants.
Column A is the building number
Column B is the Area in metres squared
Column C is the tenant name
What I want to do is sum the vacancy (in sqm) for each building.
Ie, look at column A and choose the rows relating to a particular building, whose number is in column D1
Then look just at those rows and select those tenants named as "vacant"
Then add the areas from column B of those vacant plots.
Average Of Sums
Feb 17, 2010In basic terms I have column A containing a list of dates, starting from 01/01/2005 and increasing by 1 day for each row, In column B I have the value for the day. These dates and values are still being used so the number of rows will increase day by day. I would like a formula to tell me the average total for January. So it would need to SUM each January before giving the average. I realise I could prob do this with a pivot table but if someone could give me a hint for a formula that would be great.
View 2 Replies View RelatedHow To Do 2 Sums In One Cell
Dec 10, 2013I have a number in a cell, lets say its 900. I want to multiply this number by 12 and then divide that by 52.
So a calculator I would simply type in 900 x 12 / 52 = 207.7
On excel I tried:
=sum(a1*12) /12
and it didn't work....
Refresh All The Sums
Feb 12, 2009I am trying to create a macro that will sum the total number of 1's 2's 3's 4's 5's '6s in a range of cells d17:100 and return the number of 1s to cell a3 and number of two's to cell a4 and number of 3s to cell a5 and so forth.
I also need this to run each time any changes to any cell on that particular worksheet is made - sort of like 'refresh all the sums' type of thing.
I have been working on this spreadsheet for weeks and can't get past this part!
Sums Starting Over After Zero
Feb 25, 2009I need a formula that will help me sum a row of numbers but, if at anytime there is a zero it should give me zero and the sums should start over at 1.
View 9 Replies View Related