I have 1-d array that gets populated from a number of sheets.
This array may contain duplicate entries... for example,
let's say this array contains animals.. cows, chickens, horses, pigs... etc.
What I would like to do is take this info from this array and create another where it would contain all the different types of animals but without all the repeats.
In colmn A:A i need returned, which numbers (if any) are repeated and how often each repeated number occured.
Admitedly... I'm lost on this one.
I work for a charity and I have to cancel the donations of people whose credit card donations have been declined in three consecutive months.
If in Column A I have a list of donor IDs whose credit cards were declined in Jan 2008, in Column B I have a list of donor IDs whose credit cards were declined in Feb 2008 and in Column C I have a list of donor IDs whose credit cards were declined in Mar 2008, is there a way of showing in a fourth column which donor IDs were common (repeated) in Columns A, B and C? I would have a title for each column in A1, B1 and C1, and also the column where the repeated donor IDs would be displayed.
Suppose I have the following data in column A from A1 to A12
Pass
Pass
Pass
Pass
Exceed
Fail
Fail
Exceed
Pass
Pass
Fail
Exceed
I want two formulas one to count the how many times the following pattern of data have been repeated in the range:
1- Exceed after Pass
2- Exceed before pass
I have a table that receives the number sequence 1 and sequence number 0.
I need to calculate the highest sequence numbers that repeat in Secunia lines.
A
B
C
D
E
F
G
H
I
J
K
L
Result
1
1
1
0
0
1
0
1
0
1
1
0
3
[code].....
See for example the last line.
1 1 0 0 1 0 1 1 1 1 1 0 = 5
I have a sequence number 1, where it repeats 5 times segudamente.that is greater than other sequences.
I have numbers in a table from A1 to X1. From that table I have selected some numbers in example 1: (44,3,11,20,44,3), in which the number 44 and 3 is repeated twice. What I want to do is to conserve one set of repeated numbers and to change one of the sets picking next number of repeated into the following number. Giving a result as follows (45,4,11,20,44,3) and if possible to put it in ascending order.
The same method applies in Example 2: but instead of 2 it conserves 3 repeated numbers and changes the other 3 into next following number.
*ABCDEFGHIJKLMNOPQRSTUVWX112345681011141617181920242729404144454647234Examlpe 1Examlpe 2544311204434451844518678Result 1Result 2945411204434561944518
Is there any macro or any formula for this query?
how to return the highest value of repeated controls in column A.
when comparing the numbers repeated in columns "A"
will return the highest value in column "D"
control
plug
block
value
Formula
115
20
1012
28,9
31,2
this is the highest value of repeated controls in column A
[Code] .......
I need to know if there’s a function (or method) in excel that’ll allow me to select an array of numbers and once those numbers are selected, to use only the numbers (for an averaging function) that yield the best sigma?
View 9 Replies View RelatedI have account numbers in column A. I have 2 columns which contain account range.For example column/cell f1 contains 45555555 and column cell g1 contains 45666666. I have to check if the account in column A is in this range, and if yes ,I have to have "klo" in column B.
The problem is , that I have to check a lot of rows (and I do not mentioned but I have to check other attributes with the same structure as well) and the do- loop-if structure is rather slow. Could you tell me how can I solve this with say arrays-or with other method-which can boost my macro?
I have an array of data like below:
1
3
5
7
9
I need that array interpolated to say 20 data points but the first and 20th data point must be the actual first and last data point of the array (1 & 9 in the example). I have downloaded the xlfun software but the interpolat function only does 1 point at a time...than as you drag the function down it changes the initial array. Of course I realy have anywhere from 40-60 data points to be interpolated to 100.
How can I subtract a series of numbers from an array. example.
Code:
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
13
14
25
26
37
39
[Code] ......
=ABS(1-B2) C2,D2,E2,F2 AND G and after start again with =abs(2-B2:G2)
I want to know how to do this for example until 60, I mean 60 minus the row B:G
I have a 3x3 array with positive numbers and zeros.I'm trying to write a macro that copies only the positive numbers in a row.
View 9 Replies View RelatedLets say I need an array of 100 numbers from zero to 100. I want a mean of 75, and SD of 12. Or the same data based on a skewness and kurtosis value. Can I do that in Excel?
I'm just generating fake datasets for my stats class to analyze.
Edit: I found that =norminv(rand(),,) will work.
I have an array with an ubound of 10,000 because I will be loading a different amount of numbers each time I run the macro. Is there a way to tell the amount of digits filled inside the array if it is less than 10,000?
View 4 Replies View RelatedI have in column B, cells that have any number, one number or several like B2.
#
A
B
C
D
E
[Code]...
Thinking that I have a loop for rows 1 to 3:
When in column "A" is "No", I want to consider values in C and D to get:
Code:
a[1]=Cells(1,"C") & "-" & Cells(1,"D") & "-" & "ABC"
But when in column "A" is "Yes", I want to store in array each value within cell in B (in this example B2) to apply later a For/For Each
over each number (in this example are 3 values only within cell B2), something like:
Code:
a[1]=Value_In_B2[1] & "-" & "ABC"
a[2]=Value_In_B2[2] & "-" & "ABC"
a[3]=Value_In_B2[3] & "-" & "ABC"
I want to compare the content of the cell numbers of the cells with the numbers "C1 - D1 - E 1"
If there is no comparison in the cell is written the number in the cell
If there is no cell writes in "zero"
Input
result
5
7
9
0
0
532
532
Comparative numbers
146
0
111
0
217
217
854
854
848
0
648
0
I'm using the vlookup function to pull numbers off an array. Is there a way that I can get the vlookup function to pick the smallest number greater than or equal to my Look_up value. If not is there a function that can do that?
View 9 Replies View RelatedI have a list of Items and the quantities of those items on one sheet. Each item has a section location number as well. (three Columns, Item, Quantity, and Section Location). the list can repeat the same item multiple times.
This is why I then have a summary sheet to uses a SUMIF formula to sum the quantities of a given item that are in a givin section. which my SUMIF Formula works great for. But my problem is some items have the word "LUMP" as its quantity and not a number. I want to add to my array formula so if the item does have a LUMP quantity and the lump quantity is in the section location to put LUMP on the summary sheet. here is my formula
=SUM(IF((ProjectInfo!$AE$2:$AE$307 =$B59)*(ProjectInfo!$AD$2:$AD$307= AA$10),ProjectInfo!$AF$2:$AF$307,""))
projectInfo is the sheet where the list is. Column AE is the Item column on the projectinfo sheet column B on the summary sheet would be the item that i want to sum the quantities for Column AD is the section location column on the projectinfo sheet the AA$10 is the row and column of the section location i want to limit the sum of the quantities to the formula is in cell AA59 So it will sum all the quantities in the list on the projectinfo sheet if the item and section location match whats specified on the summary sheet.
getting LUMP to display if its a lump quantity. The Lump can only show up if the item on the projectinfo sheet has LUMP for that Item AND in that section location.
EDIT: Column AF on the ProjectInfo Sheet is the quantity column
Code:
Application.ScreenUpdating = False
Dim c As String
Dim d As String
[Code]....
this works perfectly but I have found one problem, I want excel to find on the existing arrays "0,00" and "0", only full match and not only partial like for example:
-154.09, which triggers "0" for the second array and 120,00, that triggers "0,00" how to I change to only find full match with the existing arrays?
I have two sheets, where I am trying to look up the value from one sheet and post it to the other.
On sheet 1 I have the Names of the Individuals, On sheet 2 I have the Names of the individuals in a different order and then in the next column i have the amount of dollars they spent on a product.
The reason I don't think I can do a simple vlookup here is that sometimes the names are listed Multiple times each because they made seperate purchases.
So for example
Sheet 1 SHeet 2
John Doe Jane Doe $1,000
John Doe Michael Jordan $2,000
Jane Doe John Doe $3,000
Michael Jordan Michael Jackson $4,000
Michael Jackson John Doe $5,000
If I did a vlookup, I assume that John Doe would return $3,000 for both. I would like to return $3,000 for one and $5,000 for another.
Is there a quick command that I can use to take
math
math
math
math
art
art
art
art
art
music
music
music
music
into
math
art
music
I am trying to solve a column total where rows that have a repeated column A value only have their column B value totaled once.
For example the table:
A B
item1 20
item1 20
item2 50
item3 30
The total I am looking for column B is 100 (20+50+30) and not 120, as item1 should only be added once.
I made a few forum searches I made and did not find my answer, though I suspect this is a repeat question. I am guessing there may be a sumif(frequency solution out there that I'm just not hip to yet.
I have some textboxes named value1 through to value10, and have got consistent, sequential coding in the change event of each box to perform some actions (enable some other textboxes.)
I was wondering if there was a way to tidy my coding so that I do not have 10 change events that are essentiallly the same except for their sequential numbering. This may be impossible, as I think I have to have a macro for each change event, but thought I ask just in case there is a way.
Private Sub value1_change()
If value1 "" Then
markup1.Enabled = True
Quote1.Enabled = True
Else
markup1.Value = ""
Quote1.Value = ""
markup1.Enabled = False
Quote1.Enabled = False
End If.......................
In the attached file column A has ID's. In the attached example i have used 2 ID's 141020061 & 151020062. I need to find the last entry of each ID and sum the value from the column F. that is the last entry for the ID 141020061 is 40500 and for 151020062 is 0 so the total should be 40500.
View 9 Replies View RelatedWould like to have a formula for removing duplicate row values from the attached sheet.
In simple, in the first row, Name1 and Name2 are repeating. And the requirement is to remove the repeated value "A" from Name2.
I have 1 to 30 spread sheet plus a Sheet with TOTAL , each represents one day ,
on each sheet I have one column and 6 lines where I will please random numbers from 1 - 50 but six number on each sheet
The question is on the total sheet I would like to have automatically the number repeats the most on those 31 sheets .
i have one Q??
i have these times
07:00
07:43
04:55
07:43
is it possible to COUNTIF the repeated hours? the result should be 3 "07:??"
how to delete repeated rows and just keep the first one found?
View 13 Replies View RelatedI have a table with some reapeated words in, I wondered if anyone had any methods of counting words and displaying the total in number format. for example if I had in cell A1-Hello and A2-Hello and A3-Bye how can I get Hello = 2 and Bye =1
View 9 Replies View RelatedI have a list of products more than 5000 positions (rows)
Some positions are repeated (It could be 1000 rows with "Pen" position)
Based on this I need to create new short list which will contain the list of ONLY UNIQUE positions.
The same function is: DATA - FILTER - ADVANCED FILTER - UNIQUE RECORD ONLY
It is only filter, but i need the same functionality for new short unique list