Text File Transfer Of Data.
Feb 10, 2010
I have a data in excel sheet which I would like to convert into a text file. In the text file, the data format should be with the brackets and comma separated.
For example:
In excel sheet:
12 2 45 25
23 1 35 50
24 1 21 23
In text file the same data should be in the following format:
(12,2,45)[25]
(23,1,35)[50]
(24,1,21)[23]
The above is for one data set . In other data set, the brackets may change places for example: (1,23)[12,34,56]
View 4 Replies
ADVERTISEMENT
May 17, 2007
As my data in the txt file has grown so has the time for the code to write back in into a workbook sheet line by line
Open LogFileName For Input Access Read Shared As #FileNum
While Not EOF(1)
Line Input #1, WholeLine
WholeLine = Mid(Trim(WholeLine), 2, Len(Trim(WholeLine)) - 2)
my_array = Split(WholeLine, ";")
Sheets("Text"). Range(Cells(x, 1), Cells(x, UBound(my_array) + 1)).Value = my_array
x = x + 1
Wend
Close #1
Is there a syntax for the whole txt file to be transfered?
View 9 Replies
View Related
Jun 15, 2006
I have Workbook1 that I need to update from another Workbook2 in a different location on the network. Workbook2 is read only. Workbook2 is generated automatically with a name like "product 06-14.xls". Now my problem is that, since it get created automatically, the next day it will create a new workbook with a new name "product 06-15.xls" leaving the old file in the same directory for future reference.
I need to update a cell with the new current date up to the completion of the month plus the beginning of the next month to make it a complete month, so a completed month will be from 05-01-2006 to 06-1-2006 because the last day of the month doesn't get recorded until next day. What I have problems with is the looping to go to the next day until the beginning of the next. Then stop and start again on a new cell inputting the new month.
April-06 ---- 5,907
May-06 ----- 4,954
June-06 ------ 524
July-06 ----
This is what I have so far.
[PHP]
Sub GetData()
Dim Cel As Range
Dim Row As Long
Dim Col As Long
'Turn off ScreenUpdating for faster macro runtime so screen won't flash while running.................
View 4 Replies
View Related
Jan 30, 2014
I have a sheet which is list of prizes. Column B represents the type of auction this could go to Column C represents the type of prize and Column D the name of the person responsible. The other 4 sheets is for the live auction, the silent auction, the raffle and goodies prizes
If on sheet 1 the type of auction is SA, I'd like Column B, C and D to be reflected in the Silent auction sheet (List SA)
If on sheet 1 the type of auction is LA, I'd like Column B, C and D to be reflected in the Live auction sheet (List LA) and same for Raffle (R) and Goodies (GB)
View 3 Replies
View Related
Jan 19, 2008
I have a macro that transfers data from one workbook to another, this works fine, however the problem I have is that one of the files has the name changed frequently to another name, so each time i run the macro I have to change the original file name to the revised file name.
here is a copy of the macro
Dim NextRow As Long, Isht As Worksheet, Lsht As Worksheet
Application.ScreenUpdating = False
Set Isht = Workbooks("RMG Daily.xls").Worksheets("Retail Team 1")
Set Lsht = Workbooks("Weekly Monthly YTD Scores.xls").Worksheets("Raw Data")
NextRow = Lsht.Cells(Rows.Count, 2).End(xlUp).Row + 1 'next empty row in col A
the "RMG daily.xls" is the file change is used as a template but then saved as ie "010108.xls"
rather than me editing the macro each time I need to create a pop up box that will allow user to type in file name for the transfer - this will then link in with this part of my VBA code
"Set Isht = Workbooks("RMG Daily.xls").Worksheets("Retail Team 1") to instantly recognise where my data is being transferred from.
View 9 Replies
View Related
Apr 8, 2014
That probably was not the best title, but here is my dilemma. I have one file that has about 10,000 records in it and I would like to place the information in the records into a new file, under different fields.
Is there a wizard or script I can use to identify what the equivalent fields between the two files and have it transfer all the records over to populate that new file in that format that I specified?
View 4 Replies
View Related
Sep 18, 2009
I have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
View 3 Replies
View Related
Nov 25, 2009
I have a macro that first refreshes a specific data range that imports data from a text file as such:
View 2 Replies
View Related
Oct 19, 2005
We have a program that writes a text file for a CNC Machine. It list the length of the board it needs to cut and how many. It may write up to 25 different files each day. All names start with the date. Today's files start with 1019 and a space. It is also the first line of the text file. I need a total of board feet from each file. My goal is to have one sheet that has the file name in the "A" column and the total feet in the "B" column. I'll copy part of the text file here. The L: is the length of the board and the N: is the number of pieces. All the files have a .prg extension....
View 9 Replies
View Related
Aug 13, 2013
Got a slight problem; I am making a "worker-plan", where you should be able to write a name on one file and have it updated (removed) from the equivalent columns on another file automatically. Here's an example with two separate projects:
Project 1 before and after changes:
Attachment 257366
Attachment 257367
Project 2 before and after changes:
Attachment 257368
Attachment 257369
You can see here how I intended it to work. When one worker is moved from Project 1 to Project 2, that worker should also be removed from those weeks in Project 1. The previous worker from Project 2 should also be removed from those weeks (in Project 2).
Are there any formulas that can make this work automatically? All week numbers will belong to the same columns in all files.
Edit: There are 30 files that should be syncronized, not just two.. I could also gather all files into one file with sheets, instead of having seperate files.
View 2 Replies
View Related
Feb 25, 2009
I have written a VBA to read data from a text file (almost 5 MB = 2 lakh rows) and write into excel file. The script runs fine and transfers all data to the excel.But when i open the resulting excel file, only the first 2 and the last worksheets are visible. The worksheets in between and the data in it are missing. Second issue is tht, although i have written code to create a new worksheet when row number reaches 65535, the script writes only till row no. 32768.
View 2 Replies
View Related
Aug 8, 2009
If the three letter code (in the second field) matches one in the range,
I'd like to input the company name into the cell beside it. I'm trying to import a list such as this:
3D OIL LIMIT,TDO,Energy
3D RESOURCES,DDD,Materi
3Q HOLDINGS ,TQH,Softwa
4C SECURITY ,FCS,Techno
A-CAP RESOUR,ACB,Materi
A.B.C. LEARN,ABS,Consum
A1 MINERALS ,AAM,Materi
AAQ HOLDINGS,AAQ,Food B
etc...........
View 3 Replies
View Related
Feb 10, 2012
My data looks like this - it's a text file that I import into Excel.
What I'm looking for is operations that require welding, as indicated by the "Weld:" in Row 61. If it is a weld operation, I want to know the time (121.705) and the Operator involved (Opr 2 - Row 64).
I'm simply using an IF statement in a loop to extract these specific cells:
Range("N2").Select
Do
ActiveCell.FormulaR1C1 = "=IF(MID(RC[-13],11,5)=""Weld:"",LEFT(RC[-13],3),"""")"
ActiveCell.Offset(1, 0).Select
Loop Until IsEmpty(ActiveCell.Offset(0, -13))
Because I don't know how to write "real" code, it does a similar loop 5 times. Once to pull the sequence number (the first number), then the time, then I have 3 separate columns looking for Operator 1, 2 or 3, respectively. Once those 5 loops are complete there is a pivot table that summarizes the sequences for each operator.
It works fine, but it's slow. Some of the text files have 10,000 lines in them.
View 9 Replies
View Related
Apr 19, 2007
I would like to transfer the data in my Excel Sheet to a txt file while still keeping the widths the same as they were in the Excel Sheet.
A portion of what I want to convert is in the the attached Excel File.
The txt file is what I would like it to be converted to.
When I cut and paste, it adds a tab space between each column which I dont want.
View 8 Replies
View Related
Dec 4, 2006
I'm looking to build a macro which will automatically transfer a line of text from one worksheet to another within the same workbook. Once the macro has been run, the text in the original sheet should disappear and re-appear in the other worksheet. It should appear in the same column, but different line from the original.
View 9 Replies
View Related
Feb 4, 2014
I need a macro created, which extracts data from the text file, and displays the low level detail which is on the text file.
I have created a sample of the desired results on a tab called "Low Level Results".
I have already created a macro already which extracts data from the text file, but this gives me a high level view and the results of this is on the tab "High Level Results" ( which you might be able to adapt)
Please find attached two files,
Text File,
And Excel spreadsheet
View 2 Replies
View Related
Mar 26, 2008
please annotate the code to explain the workings and how it all fits together,
View 10 Replies
View Related
Jan 21, 2009
I have a table made up of 4 columns and variable number of rows. Column A has 8-digit number; B has 8-digit number; C has text up to 40 chars; D has a number with two decimal points. I would like to generate or replace a text file in csv format containing each row's data EXCEPT where column D value (number with 2-decimal points) is 0.00.
Using Excel 2003.
View 4 Replies
View Related
Jun 11, 2014
I've never actually had a reason or need to use macros for data import or manipulation. At the moment I'm trying to work on a modeling problem which will output the data in the form of a large text file. The data is divided up using 1000 energy bins, and 1000 timing bins for each tally (unique set of output data) like in this file [URL].....Unfortunately because of the applications for the data I can't reduce the number of bins, and the software being used for the modeling will not provide a more convenient form for the output file.
How to create a macro that can extract this data from the output file and import it into a designated excel spreadsheet. It would be preferable to import each set of tally data from the initial output file into it's own spreadsheet, but as I said I have no experience using macros and I'm not even sure where to begin in making something that would work. or even a basic source for examples
View 1 Replies
View Related
Nov 15, 2006
every day i get a .txt file containing data. i need to copy all the data from this file to excel...
i want a VBA code that will select the .txt file from given location and copy entire details from that file to Excel..
View 9 Replies
View Related
Jul 25, 2006
I have a tab delimited text file with more than 256 columns that I would like to place into an Excel worksheet in a specific format using VBA.
Here is a sample text file showing the way the data is laid out. The actual text file has several hundred rows and columns, depending on the number of tests.
textData.txt
This is how I want the data to be placed into Excel:
TransposeData.xls
View 4 Replies
View Related
Sep 17, 2006
I have a text file (EP-User.txt) contains records of User information like the example below:
[User]
org_id=HR
uid=JohnChen
role=employee
email_address=John@etex.com
first_name=John
last_name=Chen
job_title=Manager
country=USA
language=EN
time_zone=GMT-8
street=3
city=MX
state=NY
zip=123456
telephone=09847684
fax=23469483.....................
The fields of each User record may not appear in sequence and some of the fields may not appear in other User record. The file contains thousands of User records.
1. I need to extract the User records (only certain fields) into excel for data analysis and manipulation (fill-in missing value in certain fields).
2. After analysis and manipulation in excel, I need to export the data back to the original text file format again.
View 9 Replies
View Related
Mar 1, 2007
I'm working with a list of different manufacturer part numbers, that must be represented in TEXT format only! The file with manufacturer part numbers exported from ERP system to TXT/CSV formats. When I open it in Excel , manually in "Text Import Wizard" I define Column Data Format as Text.
Examples:
1. part number 3214-4-5 turns to 05/04/3214
2. part number 0005487 turns to 5487
3. part number 223878615654 turns to 2.23879E+11
4. part number 4303.240600 turns to 4303.2406
Is anyway to do it automatically from VBA? I try to record macro , but it does not contain "text format".
View 2 Replies
View Related
Jun 1, 2013
I have some quality information that is stored in a single .txt format. All the information for several different parts are stored in the same file "merge__chr.txt I then have a single excel file for each different part. I need to be able to use a macro to extract the data from the txt file and fill in the excel file based on 3 criteria.
Part #
Serial #
Characteristic #
The part # is always in cell "B4" of the excel file, and the first column of the .txt file The Serial # is variable, but will always be in column B (starting at row 11 and down) of the excel file, and the second column of the .txt file The Characteristic # will always be in row #7 (starting at column D and right) of the excel file, and is in the 3rd column of the .txt file.
I need this to copy the information from the 6th column of the .txt file and store it in the cell where the characteristic and serial # meet. I only need to be able to do this for 1 serial # at a time. When the current serial # is selected, I would like to use a button to fill in all the information for all Characteristics of that part. I attached a sample set of data with "QA-PRINT" as the Part #.
View 6 Replies
View Related
Jan 4, 2014
When I export data from .csv or .tsv file to .excel file then all the preceding zero's disappear and the code 0010 display's like 10.
I know I can manually import data from csv to text(option "fromtext" in excel) but i want to do it automatically.
View 1 Replies
View Related
Apr 27, 2012
I am using Excel 2010 and I want to import data from a text file, but the problem is that the data is more than 1048576 rows of excel. Is there any solution though codes if one sheet fills up and import remaining data to other sheets ?
View 2 Replies
View Related
Jan 15, 2014
I am looking to import data in text file to Excel sheet. Here is the main catch - All the data are not of fixed length and are in multiple lines as in the example below.
Text File:
ID001 Dr Dang 01012011 Male
USA Married 123
Below is how I expected the data extraction in Excel:
ColumnA ColumnB
CardID ID001
Name Dr Dang
DOB 01012011
Sex Male
Country USA
Status Married
Pin 123
View 3 Replies
View Related
Dec 25, 2009
i need away that will give me the way to pull data from specified place
in txt file to A1 cell in excel sheet3
View 9 Replies
View Related
Jun 7, 2006
I want to copy a bunch of data from a text file and paste in into an excel worksheet I have open. I want to paste it at the end but I don't know how large the data range will be each time so I can't select that size range. I have this code so far:
FileToOpen = Application. GetOpenFilename("Text Files (*.txt), *.txt")
If FileToOpen <> False
Then
Workbooks.Open FileToOpen
Else
Exit Sub
End If
Cells.Select
Selection.Cut
Windows("myfile.xls").Activate
Range("A1").Select 'THIS IS THE OLD CODE FOR THE FIRST IMPORT
ActiveSheet.Paste 'I NEED TO REPLACE THIS WITH THE CODE FOR APPENDING
'OR PASTING AT THE END OF MY RANGE
View 9 Replies
View Related
Aug 7, 2006
I have been trying to work this out by looking at other posts (mostly concerning Binary Access) but can't figure it! The source text files I am using can vary in length from 4,000 characters to well over 100,000 characters. However the data I am looking for always starts 40 characters from the end of the file and is 10 characters long! I need my macro to pick out this data and store it as a string (so it can be added to an array and exported to a worksheet later)
View 2 Replies
View Related
