I have a spreadsheet of 16,000+ lines that I need to transpose. All the L lines need to line up after the E lines. The L is going to be dropped, so I only need column B to copy over.
What I have tried so far: IF(AND ($A2="E",$A4="L"),$B4,""). Using that method, I would have to edit $B4 for each possible L. There are up to 123 L entries per E. See attachment for more detail.
I have this as part of my
Sheets("Data").Range("I5:I9").Copy
Sheets("Totals").Range("G3").PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
How can I make it Paste to every other column starting in G3?
If I can get help on this part, I guess I can adapt it to copy the verticle range O5:O9 and Paste starting at H3 (every other col)
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
E.G.
Sheet 1:
A1 = 1
A2 = 3
B1 = 2
B2 = 4
Sheet2:
A1 = Sheet1!A1
A2 = Sheet1!B1
B1 = Sheet1!A2
B2 = Sheet1!B2
This would typically be an easy exercise, but I have a set 205 rows long and 12 columns wide. A little long to do it one by one.
in the attached spreadsheet, in sheet 1 col A contains the ID of funds. Col C-D are monthly returns for 2006 and col P to AA are monthly fund size for 2006. I would like to put the data into the format like in Sheet 2. e.g. ID, Date, Monthly Return, Monthly Fund Size. one ID should have 12 rows, as one for each month's data.
In the spreadsheet attached I have done it for 2 funds. But the problem is that I have more than 6000 funds, is there a formular I can set to grad the ID number from sheet 1 and store 12 times into column A in sheet 2? same as the date in column B (sheet 2)? for col C &D in sheet 2, I can set lookup formula.
I am currently using the following code to copy data in a spreadsheet from a horizontal format to a vertical one, i.e
before -
data1
data2
after -data1 data2
Range("B5:B14").Select
Application.CutCopyMode = False
Selection.Copy
Range("N3:W3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
I need to do this all the way down to cells B5000 and N5000 to ensure all data is copied but obviously this makes for a lot of code. Is there any way I can use a For statement to auto increment 4 variables to replace the absolute cell references? I have attached the sheet I am trying to wokr on for reference.
Currently we are transposing data in multiple cells from horizontal to vertical & vice versa.
But when i try to transpose data which are in single cells seperated with semicolon or comma, im not able to perform the action.
Is there any VBA function or public function to perform the this action?
Example:
From
A 1Dog; Lion; Parrot; Bee; Snail
To
A 7Dog8Lion9Parrot10Bee
11Snail
Like wise i will have to do the same action for the following
A B1Dog; Lion; Parrot; Bee; Snail2Goat; Crocodile; Love Birds; Bug; Snake3Hen; Elephant; Peocock; Mosquito4Dog12; Tiger78; Flies5Cat11; Bug1506Chicken7
I have a col of dates that change, 9/15, 10/15, 11/05 and reside in col. I
I then have a corresonding cell in row I136, M136, Q136, U136, Y136 and AC136.
I want to find the starting at the earliest date starting in I36 , M136, Q136...
So I136 would be updated to 9/15, M136 = 10/15, Q136 = 11/05, ...
I am thinking a CSE type formula would be a possibility, but need assistance in this or in a piece of code..
How a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
I am working on a Skills tool for work which is in its very early stages and i want to record the results in the following way:
The questions are on a tab called Q's. the results are summarised in a column, range C4:C32. On this sheet i want an 'enter' button assigned to a macro which then sends the summary of results to the 'Future Skills' tab.
I have recorded a macro which moves the results and does what i want however can this code be ammended so that when the next person completes their questions and presses enter, their results are added to the next line down, (allowing for easy comparrisons) heres the recorded macro.
The data is in column A & B so the transpose would be =TRANSPOSE(A1:A10). What I want to do is add (A1 to B1), (A2 to B2) etc. I’ve tried =SUM(Transpose(A1:A10),Transpose(B1:B10) etc, but can’t get it to work.
View 9 Replies View RelatedI have a worksheet where I would like to transpose the 3 columns into 1 row.
I would to change
ID
NUMBER
DATE
[Code]....
into
950 9.8 01/01/1992 950 6.34 01/01/2002 950 5.43 01/06/2002 950 6.76 01/09/2002 950 7.44 01/01/2003 etc...
This worksheet has 5413 rows with different ID's and it is attached : Columns to row.xlsx
in transposing all data, I have data in the format below:
Material ID | Attribute Name | Attribute Value |
MaterialNo.123 | Color | Red |
MaterialNo.123 | Color | Cherry Red |
MaterialNo.123 | Color | Sunset Red |
I want to transpose it to show:
Color Color Color
MaterialNo.123 | Red | Cherry Red | Sunset Red |
I have dynamic titles in row A, listed in no order and with blank cells between all the titles. On another sheet I want the titles listed in column 1, alphabetically and without gaps. I have gotten very close by using the COUNTIF function, but have had trouble looking up the results.
View 2 Replies View RelatedI'm getting #REF's when I do this so maybe I have to do this a certain way. Anyway, I am getting data in my excel spreadsheet that is in Column B. I need to transpose the information so it goes in cells C1:X1. Those aren't the exact rows but just an example. So I got the transpose to work.
Now my problem comes with the VLOOOKUP. I typed in the formula properly with a lookup value that matched and then selected the table. I picked the column I wanted the formula to grab, and selected FALSE.
I am trying to transpose data from sheet 1 into sheet 2 using a macro
i want to tranpose A1,B1,C1,D1 from sheet 1 to A1,A2,A3,A4 in sheet 2
then repeat the process for all the data in sheet 1 until it has all tranposed over.
I am trying to write a macro for transposing one row into multiple columns where the starting point for each column will be 15 cells starting from B4. I want to replicate the transpose for 200 rows.
View 4 Replies View RelatedI have an attached workbook, and looking to find out how I can copy from one sheet to another.
What I'm looking to do is this,
On Sheet StaffRota I want to take the Name, Service, Date, Days, and then Start & Finish and copy onto the ExportRota Sheet as shown.
How would this be possible?
Its only recently i ve got work with excel...Now straightaway coming to the matter i ve got some data in excel that needs to be modified. my data in excel sheet will be like this in one single column.
1)name
2)city
3)state
4)dealer
5
6
.
.
.
.
19)
and again history repeats itself
20)name
21)city
22)state./......................
If you have used formulas it is not possible to use transpose function. You receive a #REF error. Does anyone have an idea or trick to make this possible?
View 14 Replies View RelatedI'm using Sumproduct on a row with 5 entries and a column with 5 entries. I'm using Transpose to make it two row arrays so that Sumproduct will work. However, it only seems to work if I enter it as an array formula:
={SUMPRODUCT($F12:$J12,$F14:$J14,TRANSPOSE(F23:F27))}
However, I was given another formula to do a Sumproduct on a row and an upside down column - and this doesn't need entering as an array formula:
=SUMPRODUCT($B$9:B9,N(OFFSET(B3,COLUMN(B9)-COLUMN($B$9:B9),0)))
i have one problem here regarding the transpose function..
this is my original worksheet.
[url]
now, i want to transpose or switch the value in the worksheet above to become like this
[url]
i tried to use the transpose function from the "Paste Special" button but the result came out like this.
[url]
i also tried the transpose with array formula but it wont allow me to edit the values in the cells.
I have data in sheet DATA as below.
And I want to turn it into a table like in sheet TABLE.
What is the formula used tranpose?
I have a sheet with a layout similar to the following:
Network Location | Visits
Company A | (empty cell)
% Change | 8%
Company B | (empty cell)
% Change | 5%
Is there a simple way (I'm using Excel 2007) to make it appear like so:
Network Location | % Change
Company A | 8%
Company B | 5%
Is there a way to transpose or swap a column or row of data. e.g. A column of numbers going from 1 - 10, swap them around so it goes 10 - 1 in the same place?
View 7 Replies View RelatedIn the attched Workbook you'll find two tables (Original & Requested). I tied my best to display the requested but it works OK only for unique values which may not always be uniqe. formulas in Rabge A10:B24. (The formulas in C10:C24 seems to work OK for all kind of values)
View 3 Replies View RelatedThis is a snippit of my table1000 employees)
Benefit Emp1#Emp2#Emp3# ... ...
Earnings Pay34885.3541553.5825012.36
Health Insurance4317.0304317.03
[Code].....
I need to transpose column data (Sheet called "Recpt") into rows (sheet called "Formula")
Please refer to attached excel file,sheet "Formula". I have manually entered formula for 12/1/2013. Need to add formula for the rest of the sheet. Since the data is on every 4th column, I am sure it is feasible to copy the formula by adding 4th columns.
AUTOMATE TRANSPOSE 2-13-14.xlsx In the attached file, I am looking to automate the transposing of the date and numbers under each bold number. Data is truck # in bold, the engine oil change date and mileage below. I copied the data from a pivot and need the date and mileage in columns, date on top with mileage below. I can do it with paste special one truck at a time, the big chunk of data is about 2000 rows deep and was hoping the transpose paste special could be automated, I've made a few attempts on how to do it but can't get it.
View 6 Replies View Related