Automate Transpose Of Data?
Feb 13, 2014
AUTOMATE TRANSPOSE 2-13-14.xlsx In the attached file, I am looking to automate the transposing of the date and numbers under each bold number. Data is truck # in bold, the engine oil change date and mileage below. I copied the data from a pivot and need the date and mileage in columns, date on top with mileage below. I can do it with paste special one truck at a time, the big chunk of data is about 2000 rows deep and was hoping the transpose paste special could be automated, I've made a few attempts on how to do it but can't get it.
View 6 Replies
ADVERTISEMENT
Feb 6, 2009
I have a spreadsheet that I need one thing automated on it (for now). It is a tracking sheet for our QA coordinators. What happens is they have a list of medical charts that are incomplete, when they mark the column complete with an "x" then the cell that contains and "x" under the Team Leaders name should disappear.
I have a code similar but I don't know who to use and array in the code.
This is what I used to change the date of a fields automatically (I recieved this from someone on line here)
View 10 Replies
View Related
Feb 8, 2010
I m use Excel 2003 to automate the following sequence of events that I currently do manually?
AutoFilter to filter the City in column B
AutoFilter to filter the Rotation in column X
AutoFilter to filter the Positional Status in column Y
Hide columns B:W
Use the computer mouse to select a range of that includes columns A, and X to AR (inclusive).
Copy 'n' paste this selected range to worksheet: Data to Text at cell A1
Insert a new column by selecting column A and right-clicking on the column and selecting Insert
Populating the new column A starting at cell A1 with number 1 and autofilling down to the last record (1, 2, 3, 4, 5, etc...)
Delete the folowing columns: C, D, E, G, J, L, M, N, P, Q R, S, T and V
Copy 'n' paste the all the remaining data to a new documnet in MS Word 2003
Select the entire table in MS Word
From the MS Word file menu - Select Table - Convert Table to Text
In the Convert to Table to Text pop-up window - select Other radio button and type in a forward-slash "/" in the input box adjacent to the radio button (without the quotes).......................................
View 3 Replies
View Related
Feb 11, 2010
I need to extract for each individual dive: Onset/start of dive (when the whale has completed its surface interval and begins its descent)
Rate of Descent (meters/second)
Onset/start of bottom phase (the whale has stopped descended and begins the "foraging" phase of the dive...not necessary the deepest point reached)
Number of lunges (you can see these if you plot the data. They are lunges at depth indicative of feeding behavior)
End of bottom phase (begins to ascend)
Rate of Ascent
End of Dive (surface intervals begins)
I've attached a brief sampling of the data in case you're curious.
Over the years I have identified these points through visual inspection of Excel charts. It's very easy, but extremely tedious and not at all efficient. I am interested in expediting this whole process and am more than willing to learn programming (i.e. visual basic or the like)...but only IF it is the best approach for this application.
I have attached two dives worth of data, so we can see what the data looks like. Each data set can contain from 1 to 8 hours worth of data.
View 14 Replies
View Related
Sep 23, 2011
how to automate data from excel into word. This vba code takes every sheet from excel and puts it into a word document:
Code:
Sub CopyWorksheetsToWord()
' requires a reference to the Word Object library:
' in the VBE select Tools, References and check the Microsoft Word X.X object library
[Code]....
My problem is that it doesn't style the data into a table, is there any way to do this with the code I have posted? perhaps with a .Style code or something of that sort?
View 1 Replies
View Related
Mar 30, 2009
I am trying to automate data import, instead of doing it manually all the time. I recorded a macro and now I am trying to edit it so that it can be used with any file.
Here's my code -
View 3 Replies
View Related
Jun 25, 2002
I put together a little table for one of my LAN based facilities to track their Overtime Savings as compared to each of their individual units. It works great.
What I would like to do is to export the data on a weekly basis to Access. I set up an access table to recieve the data and I can get it all to work just fine except I want the users to just click on a menu item and have the export take place in the background.
I know how to create on the fly menus and get them to accecpt commands from Excel Macros so that is not an issue.
I know how to share data in Excel from Workbook to workbook, closed or open. I'm sure it can be done Excel to Access I just can not for the life of me find anything to jumpstart me in the right direction in either application's help files. Anybody out there linking their Excel data to Access?
View 9 Replies
View Related
Jan 21, 2010
I recorded a macro to open the Form on the Data Menu. Sample Worksheet Attached. After starting the macro recorder I selected the Food table cell (located to the right on the worksheet). Then went to the Menu bar.... Data Forms... and Clicked new.... followed by close and then stopped the macro Recorder. It produced the following code.... which reflects a code error when run.
Sub McrEnterFood()
'
' McrEnterFood Macro
' Macro recorded 20/01/2010
Range("P1:U16").Select
ActiveSheet.ShowDataForm
End Sub
View 2 Replies
View Related
Jul 18, 2014
Excel spreadsheet, that contains several columns. Three of these columns contain text data that is selected by using a simple drop-down menu sourced from a list. If an attempt is made to enter text data not in the associated list an error message is displayed. Easy so far.
I need need to extend the text data validation across all three columns so that only specific combinations of the text in the three columns can be used which is reflected in a further list. These combinations will be counted elsewhere and so needed. Therefore, if i attempt to enter a combination of text columns that is not reflected in the list, this too will present an error message stating 'combination not valid', or words to this effect.
View 2 Replies
View Related
Aug 8, 2008
Daily Iam Entrying 100`s Of Supplier Data And Material Detail,
I Want Data Should Be Poped Out While Entering In Dataentry Sheet And Data Selction Should Be From Ohther Prefilled Cells. Auto Merged Post Until 24 Hrs Passes;Here Is The File
View 4 Replies
View Related
Apr 18, 2010
I have the office 2007 Suite.I have a small business, where i sell online mostly. I'm creating a simple spreadsheet using Excel 2007, a workbook that has simple financial statements.
I'm creating a list of customers along with what they order, what they paid, how they paid, (paypal, cheque) etc, The first column is the invoice number, and each is unique to each customer. I add as i get orders. so my list of invoices has the following fields as column headers
Quote:
Invoice Number Customer Name, Paid by Paypal, Paid by Cheque, Amount, Cusotmer email, Customer address, There are more and i won't list them all. Now each time i send an order, i have to fill in the excel worksheet. I then create the invoice separately in Word 2007 which i print to send to the customer with the order in the mail. The third step is sending an email to the customer upon despatch, using Outlook 2007.
I don't want to use accounting software as that is too complicated for my simple little business. What i do want to do however is combine all three tasks instead of having to open different programs and copying and pasting between them. I'd like to be able to add the data to Excel either using a form (ideally) or direct, then i'd like to be able to click on the "customer email" field to send a confirmation email to the customer, and also to be able to have an automated invoice, either in excel or Word, which draws the information automatically for each invoice, so that i only have to print it.
At the moment i'm doing all 3 tasks separately, when i know they can be automated.
1. I have about 20 columns of data for each invoice, ideally i'd like to be able to enter them from a form as it gets cumbersome going through them all in Excel. The form could be either in Word or Excel, which would be easier?
2. Using the invoice number as the unique field, how can i create an invoice that would draw out the required fields from the Excel data automatically, just by clicking a button? I dont' mind using either Excel or Word, whichever is easier, and i do have Access too, but i don't know if i should use that, or not. I don't need to draw any other data. I only want to print invoices and send confirmation emails.
3. After printing the invoice and posting the order to the customer i sent them an email confirming. Again i have to manually enter or copy and paste data in the email, which i know could be automated, if i create a template, and have some fields that are automaitcally populated using the fields in the date already entered.
These fields ususally include the total paid, currency paid, address, name and how many ordered. All of this could be automated, but i'm not sure how to do it.
View 9 Replies
View Related
May 6, 2014
Data Validation setup: "Allow" is: List "Source" is: =$E$12:$E$15
D___E____F
12__CA__CASH
13__OT__ONLINE TRANSACTION
14__DD__DIRECT DEPOSITE
15__AW__AUTOMATIC WITHDRAWAL
The codes in E column are what is entered in a worksheet range (user cannot see the list). Needed is to show both the two-character code in column E and the text definitions in column F in the dropdown. As data validation now works, users only see the two-character code and are not remembering what the code stands for - they need to see the definition.
Is there a way to show both the two-character code from column E along with the text in column F? When user selects, only the code would be entered in the target cell. (Is data validation the correct technique?)
I have set this problem up in closely located cells to construct the issue. In reality, the validation list is well off-screen from where the user is actually inserting the codes and there are many more codes/definitions.
View 3 Replies
View Related
Jul 15, 2014
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
View 3 Replies
View Related
Feb 12, 2009
When I was using Excel 2000, there was an Excel add-in where I could highlight rows of information and then transpose these into columns of information. Since we have upgraded to Excel 2003, the same Excel add-in does not work and I have not been able to find a simple solution to transpose my information from a horizontal view to a vertical view or the reverse.
Or do I just have to move 53 columns (weeks) of 4 rows one cell at a time to 4 columns of 53 rows (weeks)?
View 3 Replies
View Related
Jan 17, 2008
Is it possible to associate a range of cells containing different information based on like values in other cells?
Example:
How it currently appears in spreadsheet
Name Acct#
John Q. Public 12345
John Q. Public 23456
John Q. Public 34567
John Q. Public 45678
Jane Example 11111
Jane Example 22222
Wanted Result
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
Jane Example 11111 22222
Jane Example 11111 22222
I know how to remove the duplicates afterwords to get one unique record.
View 4 Replies
View Related
Jul 3, 2014
in transposing all data, I have data in the format below:
Material ID | Attribute Name | Attribute Value |
MaterialNo.123 | Color | Red |
MaterialNo.123 | Color | Cherry Red |
MaterialNo.123 | Color | Sunset Red |
I want to transpose it to show:
Color Color Color
MaterialNo.123 | Red | Cherry Red | Sunset Red |
View 2 Replies
View Related
Dec 8, 2013
I need to transpose column data (Sheet called "Recpt") into rows (sheet called "Formula")
Please refer to attached excel file,sheet "Formula". I have manually entered formula for 12/1/2013. Need to add formula for the rest of the sheet. Since the data is on every 4th column, I am sure it is feasible to copy the formula by adding 4th columns.
View 3 Replies
View Related
Feb 19, 2014
I am working on a spreadsheet that has (7) sheets or (7) tabs. The First tab is the "Summary Tab" and the 3rd tab is the "Plate" tab. I am working in a range of cells that go up and down on the "Summary Tab" and I need to fill them with the values from the "Plate Tab" that goes side to side or across. I can enter into the top cell on the "Summary Tab": =Plate!B47 and I will get the value that I need. However, I want to copy the formula or fill down and have it pull the values from the cells on the "Plate Tab" Horizontally like this (as I fill down) =Plate!_$47 Where the "_" changes to "C", "D", "E", etc.... but it stays on row 47!!!! How can I do this????
View 5 Replies
View Related
Jul 11, 2008
I have a list of about 3,000 names and places of work, in two columns. What I want is to have the place of work in the first column, and then all the employees along that row.
There must be a simple solution to this, but I have been banging my head on my desk all morning trying to work it out. All the places of work are sorted, if that makes any difference.
View 14 Replies
View Related
Aug 26, 2009
I'm working on this project that I inherited from another colleague and am at a sticking point. The workbook is used to determine which employees are working on which projects what pct of the time. The workbook was set up using a start and end date (columns e and f) for the projects instead of a column with the month and the correct percentage. I've set up monthly columns, which are now in columns K through AF. I believe that I need to transpose those columns into a row so that I can set up a pivot table.
View 5 Replies
View Related
Jun 7, 2014
I need macro to transpose the raw data I have extracted from a Biometrics file into the format I need to compute for work hours.
Sheet 1(raw data)
Sheet 2 ( format i want the data to look like)
View 3 Replies
View Related
Aug 19, 2014
I've got a workbook called MyBook1 which has 12 groups of 5 columns representing each calendar month. I am looking to create a macro (one for each month) which will be executed from another workbook. This macro will pull a column of data from a workbook called Data1 and paste into a row in the MyBook1 workbook.
Using the macro recorder, I've got the following code that works great but was trying to shorten the code and get it to work from another workbook but haven't been successful. I believe all that needs to be done is create a variable for the source/destination workbooks then set the selections and do the copy/paste but I'm having a hard time finding example macros which I can learn from.
Working code below for January, for Febuary the Data1 range is D2:D6, and the destination is 5 columns over making it M3. Then just follow the code below as a template.
[Code].....
View 11 Replies
View Related
Aug 19, 2014
I have a performance extract from a system which has performance for multiple accounts but the data is off different lengths and shown vertically. I wish to move the data onto a new sheet but rotated(transposed) horizontally
Attached is a snapshot of the report that is usually about 20,000 lines. See input and output tabs.
Is there any way that a macro could be created to do this.
Performance.xlsx
View 3 Replies
View Related
Mar 26, 2014
Please refer to attached file.
I have employee Clock IN - Clock Out as shown in Column A thru C. An employee can have more then 1 Clock In Clock Out as shown for Employee Name Karmen and Haley.
As shown, each employee is separated by "----------------------" and it ends with "REPORT END"
I would like a VB Code to transpose the data as shown in Column G thru H ...
View 2 Replies
View Related
Feb 9, 2009
I have data that gets dumped from a program into a nasty horizontal format that I need to get transposed into a verticle format. As it stands now, the info is reported with hourly data spread accross rows. I need the hourly data in one column. See attached sheet for an example of what I need done with the data. I'm looking for a macro to take my "original" sheet and create my "new" sheet. Note: a macro that can do this would save me days of time.
View 4 Replies
View Related
Oct 18, 2009
I need a macro to manipulate some data. The attached example contains more details.
View 2 Replies
View Related
Jan 29, 2012
I would like to transpose the data below Columns( A & B).GroupPersonAA1AA2AA3AA4BB1BB2BB3CC1CC2
To this format on Sheet2 Starting in A1.
ABCA1B1C1A2B2C2A3B3A4
View 7 Replies
View Related
Jun 21, 2012
I need the following data transposed to the next sheet in this formatClaims
Assessor:
Claim ID:
Quality Checker:
Q/Assessment Date:
Correct Member
Correct Payee
Correct re-imbursement address
Correct amount & currency
[Code]...
where score denoted the marks achieved. with the code for the same.
Claims Assessor:
abc
Quality Checker:
xyz
Claim ID:
165663
Q/Assessment Date:
21-06-2012
[Code]....
View 3 Replies
View Related
Dec 10, 2003
I have a set range of 21 rows, and the data in column A.
how can i tell the vba to look at cell A1:A21, copy the data, and past special transpose it onto Sheet2 starting with A1:U1
then for cells A22:A42, copy and paste special transpose onto Sheet2 A2:U2 and follow this procesure down the length of the entire sheet.
View 9 Replies
View Related
Oct 14, 2013
I want to transpose my data. Please see excel file. The original data is of 5 persons (in column) and working hours are recorded over the 35 days (day 1 to day 35 in rows). There are 35 entries for each persons.
I want to do a longitudinal analysis. So I want to transpose data in such a way that each person is repeated 35 time one column, with day in next column (1-35), and working hours are give in front;
For detail see attached excel sheet.
Original table
ID
D1
D2
D3
D4
D5
D6
D7
[Code] ...........
Want to make below table
ID
Day
Hour
1
1
2
[Code] .......
View 2 Replies
View Related
