How a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
I am reading this fomular and cannot understand it.
=SUMPRODUCT($Q$13:$Q$309,($P$13:$P$309=$D20)*1,($O$13:$O$309=H$8)*1)
Basically each input should be a matrix and the first one really is. However the other two are not and look unfamiliar to me.
Currently we are transposing data in multiple cells from horizontal to vertical & vice versa.
But when i try to transpose data which are in single cells seperated with semicolon or comma, im not able to perform the action.
Is there any VBA function or public function to perform the this action?
Example:
From
A 1Dog; Lion; Parrot; Bee; Snail
To
A 7Dog8Lion9Parrot10Bee
11Snail
Like wise i will have to do the same action for the following
A B1Dog; Lion; Parrot; Bee; Snail2Goat; Crocodile; Love Birds; Bug; Snake3Hen; Elephant; Peocock; Mosquito4Dog12; Tiger78; Flies5Cat11; Bug1506Chicken7
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
I have a very large spread sheet of about 20,000 rows. I need to output to a cell postcode ranges based on the Zone. Not all the numbers in the postcode zones are consecutive.
For the example below, the output cell for the DWN range would display like this: 0800-0801, 0804, 0810-0813
Each output cell postal range must be specific to each zone.
Postcode Zone 0200 CBA 0200 CBA 0221 CBA 0800 DWN 0800 DWN 0801 DWN 0804 DWN 0810 DWN 0810 DWN 0810 DWN 0810 DWN 0810 DWN 0810 DWN 0810 DWN 0810 DWN 0811 DWN 0812 DWN 0812 DWN 0813 DWN
Is there anyway to do this without manually doing it? I would like to tell you I've tried this and that but I've never done anything like this before so I really don't know where to start.
I'd like to check if a user supplied string is single cell reference. My problem is that the below code comes back as vallid if I enter a range like B2:B4.
Sub test2()
Dim UserAdd As String
UserAdd = InputBox("Enter your address")
'check if valid:
If ValidAddress(UserAdd) Then
MsgBox ("it's valid!")
Else
MsgBox ("it ain't valid!")
End If
End Sub
When I use the following code, the spell check still checks the entire sheet. How do I have the spell checker on check a specific cell/range of cells?
Sub spellchecker()
Range("B7").CheckSpelling
End Sub
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedBefore
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7
After
XXXXXXXYYYYYYYZZZZZZZ1234567
[Code] .....
I'm trying to do something which I can't manage with traditional formulas and a macro might be required.
I have the following table:
Code:
Header1Header2Header3Header4Header5
1.00 6.00 11.0016.0021.00
2.00 7.00 12.0017.0022.00
3.00 8.00 13.0018.0023.00
4.00 9.00 14.0019.0024.00
5.00 10.0015.0020.0025.00
What I would need to do is take all column values and transpose is to rows, copying the header for every set, like:
ColumnA ColumnB
Header1 1.00
Header2 6.00
Header3 11.00
Header4 16.00
Header5 21.00
[Code] ...
What macro would convert this:
Excel 2007AB112234Sheet2
To this:
Excel 2007A51627384Sheet2
I need a macro please that works with a table of any size.
I need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
How can you test that no single element of an array is equal to a particular value?
At Line 40, the program stops running. It asks for an object, but Im not sure why.
Also, I realized that there is an issue with sub twodeux copying the range selection from sheet1 of oldbook to the newly created sheet1(transfer template) of newbook.
How can I cause the form to hold that selection of values until its ready to put them into the newbook? ....
I have a set of data that I need to change the "layout" of. I've had similar situations before, but this one is just killing me. Basically, my data is for item pricing. It is represented as
Item, QTY, Price
A,1,1.25
A,10,1.1
A,25,1
A,100,0.9
B,1,1.25
B,10,1.1
B,25,1
B,100,0.9
C,1,1.25
C,10,1.1
C,25,1
C,100,0.9
Item D,Qty1,P1
Item D,Q2,P2
Item D,Q3,P3
Item D,Q4,P4
However, I need it in the following format:
A,1,10,25,100,1.25,1.1,1,0.9
B,1,10,25,100,1.25,1.1,1,0.9
C,1,10,25,100,1.25,1.1,1,0.9
Item DQ1Q2Q3Q4P1P2P3P4
As a note: there is a maximum of 4 Price/QTY breaks, so the script can be hard coded for that. When I tried this, I had it looking at the Item column, finding out how many breaks there are for a specific item and then doing a loop to extract the qty and price to a single row in the format shown above. It worked for the first 2 items, but then the loop got throw off. I will see if I can reproduce the code for that.
In my workbook, I want to count how many duplicate words in 2 ranges.
Eg:
Col A are more than 10,000 words and Col B are more than 10,000 words.
I want to count total duplicate words in these 2 ranges.
I am trying to search a column for specific values.... if the cells in the column equal X, Y, or Z then I want to keep them. Anything else, should be deleted....and not just the cell the entire row that it is in.
So I'd like it to search column E for a number of different values, if equal keep the data. If not (say E6 is not any of those values) then delete that row (all of row 6)
I have cells that they're values should be equal B6=B11, B7=B12, B8=B13, E6=B14, E7=B15, E8=B16, I want a macro that if the values are not equal then the background should be RED and a pop up message "The values should be equal".
View 9 Replies View RelatedI am trying to check if the dates are equal with multiple if statements! Macro works great if first date is wrong, but if the 2nd or third date is not unequal it does not work anymore.
really tried to do it myself but unfortunately
I added an excelexample
Date in E3 is different (if you type in other date in cell b3 macro does work partially).
I transposed them into a separate sheet and used that for my lists. I have to share the file with macs.
My pc is on Vista running Excel 2003. The macs are OSX Panther (not Leopard) and running Excel 2003.
Solution (?): if I make the combobox lists programmatically, it will work on the macs?
The UserForm1 with 3 comboboxes:
The comboboxes are not dependent on each other.
For each combobox, I need to have 2 columns.
For each column, I need to transpose 2 x ranges (they are NOT contiguous)
My attempts have been embarassing and futile.
What it should be: ....
Need Macro (code) to copy specific cells from a sheet into a new sheet in a desired format. I have an excel file which has data set in 20 rows. Each row has multiple fields. At the end of each data set there is a blank row. I want to capture specific data fields for each data set (e.g. Name, Bank no. etc) and put it into the respective heading. This process needs to be repeated for all the data sets.
A sample sheet is attached for better explanation. Sheet 1 has the raw data and sheet 2 has the required output. The no. of data sets shows in sheet 1 is just a sample. In actual it would be a large no. of such data sets.
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
IM trying to add the result of multiple ranges sharing a single criteria and have had no luck. I am trying to get the range from every other colum and have the total qty of the selected criteria display in a single cell. The best way to describe is countif with multiple ranges and a single criteria. perhaps countif isnt the answer, it is the only way i know to describe the issue though.
View 3 Replies View RelatedI'm trying to create a single array from multiple ranges... I'm not sure what syntax to use:
Code:
Dim dat4() As Variant
Set r = Sheet13.Range("rsqlassetid")
Set r2 = Sheet13.Range("rsqlparentcat")
dat4() = (r , r2)
I can create an array with multiple columns from a range if the columns are next to each other but in this instance they're not.
These 2 ranges both have the same number of rows and I'm trying to combine them into a 2 column array, but not sure how to make it work without looping, rediming the array and using a secondary array to preserve the data...
What is the simplest way to do it in VBA?
View 3 Replies View RelatedEvery month we have to reconcile our checks and then enter them into our application. We have an option in our application that we can do Check Number ranges. We are trying to find an away to have excel to put the checks in ranges either by a formula, a micro or a pivot tables. We have over 700 checks each month to reconcile.
View 9 Replies View RelatedWhat I have is a large number of sheets in a workbook (26 to be exact). Each of these sheets has one specific named range. The file itself is quite large so I would like to print these ranges to a single PDF file. I did my best to search for this topic in the forums and while I did find some macros that were close, there was some sort of piece of code missing. Also, will how I list the named ranges determine the order of how they will show up in the PDF File?
View 3 Replies View RelatedI am trying to get the contagious cumulative sum of various data ranges in the same column in my workbook. Data ranges are dynamic so i can not use formulas. I have prepared a table below for illustration. I need the VBA code to calculate the cumulative amounts in column C highlighted in Bold.
There is always a blank row after the cumulative amount. There is also always a text (as in column A of this example) in the same row as where the cumulative is summed up, maybe it can be useful for the code.
I would have written some code but for the algorithm to be used in this case. Maybe a nested for loop, not sure.
Heading
Numbers
Cumulative
Blank Cell
Blank Cell
Blank Cell
[code]...
I have a VBA function with the header:
cubspline(Xval As Double, XRange As range, YRange As Range) As Double
The problem is that XRange (and also YRange) is in different areas of the spreadsheet. I want to combine these areas into one range which I can pass on to the cubspline function. What is the easiest way of doing it? I'm looking for something like a "union" function for ranges in Excel.
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
View 7 Replies View Related