VBA Transpose To Next Sheet?

Aug 21, 2014

I am trying to transpose data from sheet 1 into sheet 2 using a macro

i want to tranpose A1,B1,C1,D1 from sheet 1 to A1,A2,A3,A4 in sheet 2

then repeat the process for all the data in sheet 1 until it has all tranposed over.

View 14 Replies


ADVERTISEMENT

Transpose From Row 75 In One Sheet To Column C In Another Sheet?

May 29, 2014

My workbook contains 2 sheets one called "UK" the other called "Stock"

I need Rows 75 and 76 from "UK" to be transposed into sheet "Stock" in Cols C and G, respectively.

I tried to do this with Paste Special and Transpose, but because these rows have formulas in them when you transpose it it shows #REF! in each cell.

View 3 Replies View Related

Transpose Data From 1 Sheet To Another

Feb 19, 2014

I am working on a spreadsheet that has (7) sheets or (7) tabs. The First tab is the "Summary Tab" and the 3rd tab is the "Plate" tab. I am working in a range of cells that go up and down on the "Summary Tab" and I need to fill them with the values from the "Plate Tab" that goes side to side or across. I can enter into the top cell on the "Summary Tab": =Plate!B47 and I will get the value that I need. However, I want to copy the formula or fill down and have it pull the values from the cells on the "Plate Tab" Horizontally like this (as I fill down) =Plate!_$47 Where the "_" changes to "C", "D", "E", etc.... but it stays on row 47!!!! How can I do this????

View 5 Replies View Related

Transpose Data From One Sheet To Another

Jun 21, 2012

I need the following data transposed to the next sheet in this formatClaims

Assessor:
Claim ID:
Quality Checker:
Q/Assessment Date:
Correct Member
Correct Payee
Correct re-imbursement address
Correct amount & currency

[Code]...

where score denoted the marks achieved. with the code for the same.

Claims Assessor:
abc
Quality Checker:
xyz
Claim ID:
165663
Q/Assessment Date:
21-06-2012

[Code]....

View 3 Replies View Related

Transpose To New Sheet With Header Row

Feb 28, 2010

How can i achieve this?

Copy row, create new sheet, tranpose and paste with header row.
So If i have 10 rows with row 1 as header row, it should make 9 sheets.
The name of each sheet should be the one in the first row.

e.g. sheet name = master

header1 header2 header3 header 4 header 5
a b c d e
f g h i j
k l m n o

The result will be three sheets

sheet name = a

header1 a
header2 b
header3 c
header4 d
header5 e

sheet name = b

header1 f
header2 g
header3 h
header4 i
header5 j

sheet name = c

header1 k
header2 l
header3 m
header4 n
header5 o

View 9 Replies View Related

VBA - Find Duplicates And Transpose Into New Sheet?

Feb 4, 2014

I have one workbook with two sheets. The first sheet contains the data in columns A & B. In Column A there are a number of values that are the same eg: A1,2,3,4,5 all equal "Home" A6,7,8 equal "Work". In column B there are "Comments" none which are the same.

I need a VBA that will search down column A in sheet one and find all the "Comments" for "Home" and transpose paste the comments into sheet 2 so A1 will be "Home" B1 will be the first comment, C1 the second comment, D1 the third comment and so on.

My sheet one will contain about 1000 different values in Column 1, so I need it to search for duplicates rather than the text "Home".

View 6 Replies View Related

VBA Macro To Transpose List To A Row On Different Sheet

Mar 21, 2014

I have the below VBA but am getting a 1004 error and when I step into each line I do not see the macro populating the cells as designed. The purpose of the macro is to take a list from the "EmployeeBillableHours" worksheet select the entire list s.tarting from row 2, then goto to "Client" worksheet, then starting at cell J6 paste each item on the list and then move 4 cells to the right and paste the next item on the list to the end.

Code:
Sub ClientListtoClientTab()
Dim lr As Long: lr = Worksheets("EmployeeBillableHours").Range("H" & Rows.Count).End(xlUp).Row

[Code].....

View 1 Replies View Related

Transpose Dimensional Array Onto Sheet

Apr 21, 2014

I have a dimensional array / matrix that is current a 9 by X, where x depends on the amount of entries a user makes.

Anyways my question is that I have a sheet called "Database" and I wanted to know if there was a simple code to transpose my array on that sheet starting at cell "A2".

View 3 Replies View Related

Transpose Data A1:A300 To 2nd Sheet A1:IV1

Sep 24, 2008

Looking for some code that will move a list that goes from B3:B300 (down the column) to "sheet B" A1:IV1 (across the 1st row).

View 9 Replies View Related

How To Transpose Data Across Worksheets Into One Analysis Sheet

Oct 20, 2013

I've used the following formula successfully to pull data from multiple sheets and provide the total on an analysis worksheet. Example of worksheets and formula.

=DSUM(INDIRECT("'"&A2&"'!D:D"),$B$1,INDIRECT("'"&A2&"'!D:D"))

Example of one of the individual sheets holding original data:
A
B
C
D

[Code].....

Example of what I want to see using the Transpose formula (Analysis sheet):

=TRANSPOSE(INDIRECT("'"&A2&"'!C:C"),$C$1,INDIRECT("'"&A2&"'!C:C")) (My theory that currently doesn't work. I'd like to be able to pull data across worksheets and yield the transposed data into the corresponding row of the same merchant row.

A
B
C
D

[Code].....

View 9 Replies View Related

VBA Macro - Formula Extracting Data And Transpose Into Another Sheet

Feb 3, 2014

Extract data from one sheet to another sheet then transpose automatically.

I have attached the work book of what I'm trying to accomplish.

View 14 Replies View Related

Transpose Links From Individual Sheets To Master Sheet

Apr 21, 2002

I have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.

I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.

Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.

I want to be able to repeat the procedure later if additional sheets need to be added.

View 9 Replies View Related

Copy Column And Transpose To Row - Multiple Worksheets To Summary Sheet

Jul 21, 2014

I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.

I have attached an example with 3 worksheets and the sort of summary sheet I am after.

View 6 Replies View Related

Sort Of Transpose Code - Put All Data In Column Vertically On Sheet

Sep 23, 2013

I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.

Sheet1  AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506

Result after code has run.

Sheet2  AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506

View 2 Replies View Related

Search To Find Matching Cells And Copy/transpose Adjacent Data To Original Sheet?

Nov 12, 2009

I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.

As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.

If it's any help, there are a maximum of 9 matches for a single search term in the real document.

Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!

View 9 Replies View Related

Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose

Jan 29, 2014

I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.

The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?

View 1 Replies View Related

Transpose

Dec 2, 2009

I am working on a Skills tool for work which is in its very early stages and i want to record the results in the following way:

The questions are on a tab called Q's. the results are summarised in a column, range C4:C32. On this sheet i want an 'enter' button assigned to a macro which then sends the summary of results to the 'Future Skills' tab.

I have recorded a macro which moves the results and does what i want however can this code be ammended so that when the next person completes their questions and presses enter, their results are added to the next line down, (allowing for easy comparrisons) heres the recorded macro.

View 3 Replies View Related

Using Transpose With Sum

Jan 9, 2009

The data is in column A & B so the transpose would be =TRANSPOSE(A1:A10). What I want to do is add (A1 to B1), (A2 to B2) etc. I’ve tried =SUM(Transpose(A1:A10),Transpose(B1:B10) etc, but can’t get it to work.

View 9 Replies View Related

Transpose 3 Columns To 1 Row?

Nov 21, 2012

I have a worksheet where I would like to transpose the 3 columns into 1 row.

I would to change
ID
NUMBER
DATE

[Code]....

into

950 9.8 01/01/1992 950 6.34 01/01/2002 950 5.43 01/06/2002 950 6.76 01/09/2002 950 7.44 01/01/2003 etc...

This worksheet has 5413 rows with different ID's and it is attached : Columns to row.xlsx

View 2 Replies View Related

How To Transpose All Data

Jul 3, 2014

in transposing all data, I have data in the format below:

Material ID | Attribute Name | Attribute Value |
MaterialNo.123 | Color | Red |
MaterialNo.123 | Color | Cherry Red |
MaterialNo.123 | Color | Sunset Red |

I want to transpose it to show:

Color Color Color
MaterialNo.123 | Red | Cherry Red | Sunset Red |

View 2 Replies View Related

Transpose The Cell?

Apr 8, 2009

I have a spreadsheet of 16,000+ lines that I need to transpose. All the L lines need to line up after the E lines. The L is going to be dropped, so I only need column B to copy over.

What I have tried so far: IF(AND ($A2="E",$A4="L"),$B4,""). Using that method, I would have to edit $B4 for each possible L. There are up to 123 L entries per E. See attachment for more detail.

View 2 Replies View Related

Transpose And Alphabatize

Apr 24, 2009

I have dynamic titles in row A, listed in no order and with blank cells between all the titles. On another sheet I want the titles listed in column 1, alphabetically and without gaps. I have gotten very close by using the COUNTIF function, but have had trouble looking up the results.

View 2 Replies View Related

VLOOKUP With Transpose (getting #REF's)

Jun 26, 2009

I'm getting #REF's when I do this so maybe I have to do this a certain way. Anyway, I am getting data in my excel spreadsheet that is in Column B. I need to transpose the information so it goes in cells C1:X1. Those aren't the exact rows but just an example. So I got the transpose to work.

Now my problem comes with the VLOOOKUP. I typed in the formula properly with a lookup value that matched and then selected the table. I picked the column I wanted the formula to grab, and selected FALSE.

View 2 Replies View Related

Transpose One Row With Intervals

Mar 21, 2009

I am trying to write a macro for transposing one row into multiple columns where the starting point for each column will be 15 cells starting from B4. I want to replicate the transpose for 200 rows.

View 4 Replies View Related

VBA To Transfer And Transpose

Mar 23, 2009

I have an attached workbook, and looking to find out how I can copy from one sheet to another.

What I'm looking to do is this,

On Sheet StaffRota I want to take the Name, Service, Date, Days, and then Start & Finish and copy onto the ExportRota Sheet as shown.

How would this be possible?

View 4 Replies View Related

Transpose/Index

Oct 10, 2009

Its only recently i ve got work with excel...Now straightaway coming to the matter i ve got some data in excel that needs to be modified. my data in excel sheet will be like this in one single column.

1)name
2)city
3)state
4)dealer
5
6
.
.
.
.
19)

and again history repeats itself

20)name
21)city
22)state./......................

View 5 Replies View Related

Transpose With Formulas

Aug 4, 2005

If you have used formulas it is not possible to use transpose function. You receive a #REF error. Does anyone have an idea or trick to make this possible?

View 14 Replies View Related

Transpose To Every Other Cell

Jul 25, 2007

I have this as part of my
Sheets("Data").Range("I5:I9").Copy
Sheets("Totals").Range("G3").PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
How can I make it Paste to every other column starting in G3?

If I can get help on this part, I guess I can adapt it to copy the verticle range O5:O9 and Paste starting at H3 (every other col)

View 9 Replies View Related

Using TRANSPOSE In SUMPRODUCT

Mar 26, 2008

I'm using Sumproduct on a row with 5 entries and a column with 5 entries. I'm using Transpose to make it two row arrays so that Sumproduct will work. However, it only seems to work if I enter it as an array formula:

={SUMPRODUCT($F12:$J12,$F14:$J14,TRANSPOSE(F23:F27))}

However, I was given another formula to do a Sumproduct on a row and an upside down column - and this doesn't need entering as an array formula:

=SUMPRODUCT($B$9:B9,N(OFFSET(B3,COLUMN(B9)-COLUMN($B$9:B9),0)))

View 9 Replies View Related

TRANSPOSE Function ...

Nov 2, 2008

i have one problem here regarding the transpose function..

this is my original worksheet.

[url]

now, i want to transpose or switch the value in the worksheet above to become like this

[url]

i tried to use the transpose function from the "Paste Special" button but the result came out like this.

[url]

i also tried the transpose with array formula but it wont allow me to edit the values in the cells.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved