Transpose Column
Jan 26, 2007Is there a way to transpose or swap a column or row of data. e.g. A column of numbers going from 1 - 10, swap them around so it goes 10 - 1 in the same place?
View 7 RepliesIs there a way to transpose or swap a column or row of data. e.g. A column of numbers going from 1 - 10, swap them around so it goes 10 - 1 in the same place?
View 7 RepliesI have an excel spread sheet with several rows of 265 (9A-IV) columns each with a heading. I would like to transpose the worksheet columns so that the heading is placed in Column A against the corresponding that is placed in column B. For example
ABCD14692571038Transpose to A1A2A3B4B5C6C7C8D9D10
I have a sheet with 3,000 rows and only two columns. Column "A" consists of 20 to 30 different names, column "B" consists of 50 to 60 different products. I need to be able to evalute the value in column A and copy, paste special transpose all values in Column B that have the same value in column A. As an example if cells A1 through A5 is "Arizona" and cell B1 is Broccoli, B2 is Cauliflower, B3 is Apples, B4 is Oranges, and B5 is Bananas, I want to copy B1 through B5 and paste special transpose to cell C1.
This then would need to loop all the way to the bottom of the data in Column A looking for a change in value. The attached file called Sample Data has two tabs. The one titled "report" shows the raw data, the one titled "Final" shows how I would like the results to appear (column L)
I have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
I have a sheet with a layout similar to the following:
Network Location | Visits
Company A | (empty cell)
% Change | 8%
Company B | (empty cell)
% Change | 5%
Is there a simple way (I'm using Excel 2007) to make it appear like so:
Network Location | % Change
Company A | 8%
Company B | 5%
I need to transpose column data (Sheet called "Recpt") into rows (sheet called "Formula")
Please refer to attached excel file,sheet "Formula". I have manually entered formula for 12/1/2013. Need to add formula for the rest of the sheet. Since the data is on every 4th column, I am sure it is feasible to copy the formula by adding 4th columns.
i am looking to convert data in columns to rows without using transpose but by formula. and i can drag it across to the right to keep getting new data.
i see posts mention about using functions like index, match? or other functions to do it?
i have attached the excel.
I've got a workbook called MyBook1 which has 12 groups of 5 columns representing each calendar month. I am looking to create a macro (one for each month) which will be executed from another workbook. This macro will pull a column of data from a workbook called Data1 and paste into a row in the MyBook1 workbook.
Using the macro recorder, I've got the following code that works great but was trying to shorten the code and get it to work from another workbook but haven't been successful. I believe all that needs to be done is create a variable for the source/destination workbooks then set the selections and do the copy/paste but I'm having a hard time finding example macros which I can learn from.
Working code below for January, for Febuary the Data1 range is D2:D6, and the destination is 5 columns over making it M3. Then just follow the code below as a template.
[Code].....
I have code below that I need to take a copied range and Transpose the range from a column to a row.
Code:
Sub Search_Notes_Main()
Application.ScreenUpdating = False
Sheets("Analyst Main Template").Select
[Code].....
The following data is in column A:
Adam
Mobile 19171234854
Work 19171234854
Adele
Mobile 9171234854
Home 2121234567
Adrian Simpson
Mobile 19171234854
I would like to move the data to rows with the appropriate headers:
NameMobileWorkHome
Adam1917123485419171234854
Adele9171234854 2121234567
Adrian Simpson19171234854
As you can see, some of the phone numbers start with 1 and some don't. The listings may or may not include mobile, work, and home phones.
i want to transpose the values in a column to a row and when i update the values in the column it should be transposed to the next blank row..
View 10 Replies View RelatedI have a spreadsheet with the following columns
No Of Transactions
Total Revenue
LID
OURSUB
SubCount
Name
Phone
Phone2
Email
Phone3
Phone4
Phone5
Phone6
Phone7
Broker
Bcode
There are 28,000 records in the spreadsheet.
The column LID contains the ID of the client. Each client can have transactions in multiple subs ("oursub" column). The spreadsheet is sorted by the LID column.
What I need is for the "oursubs" values to be transposed column headings for each unique LID. E.g. if "LID" 12345 has 50 records with 25 different "oursubs". I want one row with LID "12345" and 25 columns with the names of the 25 "oursubs".
I am attaching two sample spreadsheets. The spreadsheet "LID_Source.xls" contains sample source data and the spreadsheet "LID_result" shows the result that I want.
I am trying to work with a table that came from a web page that looks like this. ( It has about 200 records.)
Record 1
Name
Address
City, State Zip
Record 2
Name
Address
City State Zip
.
.
.
I want the resulting file to look like this
Record1, Name, Address, City State Zip
Record 2, Name, Address, City State Zip
I can use the Copy / Paste/transpose, but it would look like this. Record 1, Name Address, City State Zip, Record 2 Name Address. I could transpose one record at a time, but that would take a long time.
i have a data as below
abc1
def2
ghi3
jkl4
and i need the data as below in one column
a
b
c
1
d
e
f
2
g
h
i
3
...........
needed in this regard either macro or formula
I got to transpose the data from sheet "Data" into new sheet "Actual". Now One row has been added on the top (R1) to categorize the whole data in terms of Major and minor.
modify the macro which add one column (K) with header as "Error type" in sheet "Actual" and then display the above two parameters.
I want exact type of data in sheet "Actual" from raw data sheet "Data"
How do I transpose formulas from a line to a colllumn?
View 12 Replies View RelatedI'm trying to do something which I can't manage with traditional formulas and a macro might be required.
I have the following table:
Code:
Header1Header2Header3Header4Header5
1.00 6.00 11.0016.0021.00
2.00 7.00 12.0017.0022.00
3.00 8.00 13.0018.0023.00
4.00 9.00 14.0019.0024.00
5.00 10.0015.0020.0025.00
What I would need to do is take all column values and transpose is to rows, copying the header for every set, like:
ColumnA ColumnB
Header1 1.00
Header2 6.00
Header3 11.00
Header4 16.00
Header5 21.00
[Code] ...
What macro would convert this:
Excel 2007AB112234Sheet2
To this:
Excel 2007A51627384Sheet2
I need a macro please that works with a table of any size.
I am using Microsoft Office Excel 2007 and Windows 7. I have a lot of data (1-4 thousands of rows) where each column represents a year for 15 years. Every set of 5 rows are different data for a company and the values for every year of each data are under the representative column.
I want to transpose the values for every year, of one data at a time, into one column. Then do the same for the next data.
For Example I have something like this:
1998
1999
2000
2001
[Code]....
If there is a way to do this for one data (i.e. data1) it will be easy to do it for the other 4. I also know how to create a macro from the Developer Tab if it is easier to create a vba code. A formula of course is ok too. I tried for hours to find a way to do this but I couldn't...
I have a huge list, all in one column:
A1 1. Aarvark Inn
A2 Region: 3
A3 Unit: B
A4 2. Avalon Home
A5 Region: 6
A6 Unit: A
I want to make it so that every three items becomes a row. So that my data is like this, with the number and name being column A, the Region being column B, and the Unit being column C in the worksheet.
1. Aarvark Inn Region: 3 Unit: B
2. Avalon Home Region: 6 Unit: A
Transpose rows at every occurence of a value in column ...
View 9 Replies View RelatedI am to transpose a column to the next sheet as and when I add a new record at the end of the Column. I have only one Column A.
View 9 Replies View Relatedtranspose raw data to column macros ...
View 9 Replies View RelatedI am trying to transpose 1 column into 3 columns:
Example:
1
2
3
4
5
6
7
8
9
ect...
into
123
456
789
ect...
Here is the code I have:...................
I need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
This is a sample of the attached workbook.
Project
Task
Current Phase
Start Date
Planned Finish
Status
[Code]...
What I am trying to do is break up the "Phase" column into several columns, where each phase would have its own column. Something like this:
Phases
->
->
->
->
->
Project
Task
01.
02.
[Code]...
It is very important that the output of the data goes on a new sheet, and that the records maintain integrity.
Im trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.
View 4 Replies View RelatedI've tried using a Pivot Table, a Match Array V-Look Up formula I found on here (and can't seem to find anymore) that I altered to fit my cell needs, and even implemented RP-Excel.
This is an example of what I have:
Box
101
101
102
102
102
[Code]...
This is an example of what I'm trying to do:
Box
101
102
103
104
[Code]....
Additional challenges:
The actual workbook is over 4,000 rows long with a lot of various other information in neighboring columns.
The dates represent each time a specific box was filled. Some boxes only filled once, some up to 14 times. I only want up to the first five fills.
Able to try any of the following, or combinations of: Formulas, Pivot Tables, VBA, RP Excel
I've trawled a few forums for a while now trying to find a macro that matches my specifications, or one I can adapt but so far have been unsuccessful, so here goes:
I have one column of data (col. A) of customer names and addresses each with an empty row in between them. The lines of data relating to each customer vary from 6 rows to 14 rows, then an empty row, then the next customer and so on - for several thousand rows.
I am wanting to create a macro that will transpose each customer to either their own row in sheet2, or to column B and then delete column A at the end.
All I can find is macros for a specific number of rows rather than varying. One way would be to have a code that 'pads' out those customers with fewer than 14 lines by inserting rows to make them 14, and then a code to transpose 15 rows at a time.
I have a data set in an Excel spreadsheet entered as one column of data. It is names with addresses, phone numbers, job title, etc. I want to select and transpose each person in the list so when I am done the person's name is in column A, Company name in column B and so on. The problem is the information listed is not the same for each person - so there is a different number of rows for each person. The names are in bold text though, so I need to select from one cell with bold text to the row BEFORE the next row with bold text and transpose the data for each selection. I found this forum by finding an old question here that is similar at Copy based on Bold Paste-transpose provided in that post and it produced no result.
View 4 Replies View Related