Turn On View Vba Code In Apple MAC Office 2008
Aug 19, 2009how i can turn on view vba code in Apple MAC office 2008.
View 3 Replies
ADVERTISEMENT
2004 VBA To 2008 Apple Script
Oct 17, 2008I would like to convert them to AppleScript so I can use them in Excel 2008.
From what I understand I should be able to do this with AppleScript, but I have never used it before and have absolutely no idea what I am doing.
Not only do I need to know how to convert the VBA to AppleScript, I need to know what to do to make it run in Script Editor, etc.
There are two VBA Macros, each is to highlight a specified cell range, then turn on cell protection.
It is my understanding that although I couldn't record this into my VBA Macro, AppleScript will also let me unprotect the worksheet at the beginning of the script, and then re-protect it at the end of the script.
Turn VBA Code On / Off With Button
Feb 25, 2012I have a series of sheets in my workbook , each sheet has a piece of VBA code that is identical. On my master sheet I want the user to be able to turn on/off this piece of code with the toggle of a button.
My code is a :Worksheet change event
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("B9,D9,")) Is Nothing Then Exit Sub
If Target.Offset(-1, 1) = "" Then.......
.....
End If
End Sub
Code To Turn Share On/off
Aug 28, 2007Need code to disable and enable "Protect and Share Workbook"?
View 9 Replies View RelatedVIEW CODE Deactivated
Apr 28, 2007I work With Excel 2003
When Creating Data Sheet And Making Pivot Table
When I Make A right Click On The Pivot Sheet
The " View Code " Is Deactivated
As In the Pic
Code To View VBE Macro
Dec 27, 2006I have some command buttons on worksheet. I want to do next: when I am click on command button1 I am see a VBa code of command button 2 How I can do this?
View 2 Replies View RelatedTurn Off Messages While Typing Code
Oct 31, 2008Is there a way to turn off those annoying error message boxes that pop-up when a line of code is incorrect? I pretty frequently go to another area of code to grab some previous code to copy and paste, and the error message box pops-up, so I have to hit OK to close it. It would be nice if it still highlighted the problem red, but I'd even give that up for those boxes to go away.
View 5 Replies View RelatedVBA Code To Turn Off Another Running Macro
Jan 5, 2012I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
View 1 Replies View RelatedHow To Hide (View Code) Option For A Sheet
Nov 22, 2012I have a login page for my spreadsheet however a user can simply view the code to get the login username and password.
View 2 Replies View RelatedMissing Excel Objects On Apple Mac?
Jan 26, 2014On loading a VBA rich Excel file into my new Macbook pro, I get the error " Microsoft forms" followed by "Could not load an object because it is not available on this machine".
Hence the sheet I open is missing all of the functionality.
I learn that VBA objects are not well supported on Macs. It works fine on Windows.
Maximum Number For Apple Sold On Monday
Dec 4, 2011I have a table and I want to find out the what is max number for Apple sold on Monday.
FruitsQtyDaysApple20SaturdayApple50SundayApple100MondayApple500MondayApple20
MondayMango50MondayBanana640FridayMango30FridayGet MAX ForApples on Monday500
Turn #DIV//0!” To “0” Or Even Turn It To A Blank Cell
Nov 6, 2009I have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
Excel 2008 :: Opening Asp Files?
Nov 7, 2013I have Mac 2008 Excel. For my work, I download .asp files and open them in Excel. No problem. The problem is... I'm wanting to use another computer at work that has Mac 2011. When I open the exact same .asp files, they show coding (html?). I can fix this by changing the name of the file extension from ".asp" to ".xls." But I convert these files a lot during the day and this is an extra step I don't want to take. And it works fine in version 2008. So what can I do in version 2011 to make it open the files without all the coding?
View 2 Replies View RelatedPlacing The Date (1-JAN-2008) In The Right Column For DAY
Nov 8, 2008Placing the date (1-JAN-2008) in the right column for DAY
Now I have a Matrix in which I have the Days as Colum Headings and the Week Numbers as the Rows.
I will be mentioning the Date let's say 1-JAN-2008 in the Cell A1 and I want this date to appear in the approriate Column for the DAY
For Ex:-
The day for the date 1-Jan-08 was a Tuesday, therefore the date should appear in the Column having a Heading Tuesday and in the Column Monday it should show as 31-Dec-07 and the Columns for Wednesday,Thursday,Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-08, 3-Jan-08, 4-Jan-08, 5-Jan-08, 6-Jan-08).
The appearance of the Date should change as per the day-date combination and as such for the preceding as well as following dates..
Ex:- Lets say for 1-Jan-09 which comes on a Thursday it should display (1-Jan-09) under column Thu and Mon,Tue,Wed should display ( 29-Dec-08,30-Dec-08,31-Dec-08) and Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-09, 3-Jan-09, 4-Jan-09).
XL 2008 Pivot Table Refresh
Jan 17, 2010I am running XL 2008 on a Mac and have created a pivot table that works well. However, without VBA (and I don't know how to write in Applescript), is there a way to put a REFRESH button on my spreadsheet?
View 9 Replies View RelatedExcel 2008 :: Pulling Data From On Sheet To Another
Apr 3, 2013Expand the explanation for the previous thread? [URL]....
I am trying to do basically the same thing, I have a long list of clients and need to separate them by date they contacted us. I am using Excel 2008 on a mac, which does not allow micros. the previous thread does exactly what i need to do, but i cant get it to work.
Display A Table Created In 2008, In A VBA Form
Jan 19, 2009I created a table in excel, using it's Table feature, the first column has A - J, the second column has 1 - 10,
I then created a VBA form in VBA6,
How do i display that table and its 2 columns in a VBA form?
Simple VBA "View Code"
Oct 31, 2007Basically in my sheet I have a table of various data, where an entrant can appear more than once. e.g.
ACBDC
AABDC
DBCCD
BCDAB
I want to make it so that if you type in an input cell (say cell G10) an entrant your interest in (i.e. A, B, C or D), then the corresponding entrants in the table will change font color to red and go bold.
I know this must be done by right clicking on the sheet and entering a code in "View code". I can't use conditional formatting because I've already used up all 3 conditions!
Excel 2007 :: How To Adjust Protected View Settings But Protected View Tab Is Missing From Trust Centre Settings
Dec 12, 2013Excel 2007 - need to adjust protected view settings but the protected view tab is missing from my Trust Centre settings - have the following tabs - trusted publisher / location, add-ins, activeX, macro, message bar, external content and privacy options. Document is a revenue authority download and without being able to adjust the protected view settings, can't input data.
View 3 Replies View RelatedExcel 2008 :: Creating Formula To Convert Information?
May 7, 2014I am trying to get a grip on my gas n electric bills. My problem is in creating a formula to convert the info I have into the final bill.
The info I have is -: days of use, amount of G n E used, standing charge, price/unit and discounts applicable. For simplicity I have converted them all into a rate per day and £GB. I tried the following formula
:-(standing charge per day * days used)+(cost per KWH * No.of KWH used) - (discounts * days used) / (100) * (94)
This last one is to account for a direct debit 6% discount. I used cell address for things like No of days usage and KWHs used in the period. The values in these cells have themselves been calculated via a formula from other info. The results I get seem to be a constant variable which indicates that I am doing it wrong.
IF Function Inform If Person Worked Over 6 Months In 2008
Feb 1, 2009I have attached a worksheet that shows the last and first name of an employee along with their hire date and term date, if termed. What I am looking for is a function that will tell me if a person was active as of 12/31/08 which will read true on the side of their name under active; I also need a function that will tell me if a person worked over 6 months in 2008.
The first person John Doe was hired in 2005 and has a true on the side of his name which meant that he was active as of 12/31/08 but as you can see Jane Doe has true on the side of her hire date and false on the side of her term date and I don't want it to read the first true but the last true of someones name, but Jane Doe qualifies for working over 6 months even though she started in 2007.
Make One Cell Count Twice In AVG If Certain Text Conditions Apply- 2008
Mar 9, 2009I am using Excel to tabulate votes for a contest. Judges have given a number to each entry, and but certain judges' opinions need to count twice as much as other judges' opinions based on their qualifications.
I've attached the file to help illustrate what I'm trying to do. Morris's votes need to count twice for all Photography or Web Design entries, and Clark's votes need to count twice for all Graphic Design or Web Design entries.
I know I can do this manually by simply copying the number into a blank cell in another column (like the blank column between Morris and Clark's names), but is there any way to make Excel do this for me?
Excel 2008 :: How To Add Data Labels For Scatter Plot Coming From 3rd Column
Jul 29, 2014I'm using Excel 2008 for Mac & cannot figure out how to add a data label to an XY scatter plot that comes from a 3rd, separate column.
I have 3 columns of data: (A,B,C)
Labels, X values, Y values
When I select the Data Source for the Chart, there is a greyed out box for Category X axis labels, which is where I remember such information going in PC versions of Excel I used to use.
From the formatting palette, the only options to select for labels add the values of column B, but I need the reference from column A.
I'm not familiar with macros or visual basic. How to add these labels? This is Mac, Excel 2008.
Conditional Properties: If A Number In A Different Cell Is Above A Certain Number It Will Turn Green And Another Cell To Turn Red
Dec 10, 2008can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedMultiple Criteria And SUMPRODUCT (count The Number Of Rows That Have Values Greater Than 10/01/2008 In Either Of Two Fields)
Jan 23, 2009I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.
View 2 Replies View RelatedInstalling 2 Versions (or Office On Same Pc)
Nov 23, 2008ive got my highly expensive office enterprise 2007 disk
what is the best way of installing this so i can still use 97 and 2007. any tips?
i wont bother with outlook but i'd like to try the rest ,mind you onenote,infopath and groove are a complete mystery!
How To Change Language Of MS Office
Apr 24, 2013how to change language of MS office.English language is not showing in options.Do I need to purchase language pack?I am using english language other than office.
View 1 Replies View RelatedOffice Web Components In 2007
May 5, 2009I'm having a bit of an issue with OWC in 2007. I know they have been deprecated but I was under the impression, form many places including MS themself, that you could install them. I downloaded this file
http://www.microsoft.com/downloads/d...DisplayLang=en
and then the SP1 2007 file here
http://www.microsoft.com/downloads/d...displaylang=en
All seems to go well and there seems to be a appropriate .dll in c:Program FilesCommon FilesMicrosoft SharedWeb Components111033 by the name of OWCI11.DLL. However when I attempt to add a reference to that file in a VBA project in Excel (it's one that has an old broken reference to 2003 OWC) by browsing to that file it tells me
"Can't add a reference to the specified file"
What have I done wrong? Is what I am attempting, getting 2007 to use OWC, even possible? Note I did not write any of the code for this Excel Add-in so have very little idea about what OWC are for.
Office 12 Library Reference
Jan 26, 2007I have recently updated to Office 2007. I have about 50 forms with VBA in them (all excel) and I was careful to save them all back to 2003 office files. When one of my users opens the files and uses on of the internal userforms it errors out saying it is missing a reference.
View 9 Replies View RelatedMacro Cannot Run On Office 2007
Apr 10, 2007I got a copy of Office 2007 and I am having some trouble running an Excel macro. It gives a 405 Error message. This macro runs fine on my Office 2003. Is there any extra setting that I need to do in the Excel 2007?
View 9 Replies View Related