Type Equation In Cell And It Is In Another Cell
Dec 31, 2009
I am trying to type in a basic equation in a single cell (343.56 + 46.78) and I want it to be solved in another cell. Can this be done? Can I put this function in a cell where the cell it is trying to solve is not yet put in?
View 5 Replies
ADVERTISEMENT
Oct 23, 2013
I am attempting to create a ROI calculator for my place of work. I want a blank cell to fill in green or red based a cell below it being equal or greater than 5.0%. What is the Macro or equation to do that?
View 5 Replies
View Related
Oct 22, 2008
Lets say I write an equation on my sheet such as:
='A1'!$H422*AH$138
but instead of hard coding the A1 sheet name, I want that to be a value that I can put in a different cell (lets say cell C1) on my same sheet in such a way that it will reference the value in my other cell (Cell C1) and put its value into that equation.
So if I make the value in C1 = A99 then the equation becomes
='A99'!$H422*AH$138
View 9 Replies
View Related
May 13, 2009
I will like to ask, if there is a way to get in a cell the result of a simple equation without having to copy the contents of that cell with a = in front for example if i have in one cell
15*2+35*4+30/2
in the next cell to display the result
185
View 11 Replies
View Related
Aug 6, 2012
if i obtain an eqn by plotting a graph in excel, etc,
y = 1.22952117E-06x3 - 1.08197863E-05x2 + 9.97531712E-01x + 3.99014495E-01
and i wish to subsitube a cell value from another sheet into the 'x' in the above eqn and i need to do this 20 times.
View 3 Replies
View Related
May 20, 2007
I have a cell on ' Sheet 2' with the following formula:
=MAX('Sheet1'!C3:'Sheet1'C10)
ie. it chooses the maximum value from column C between rows 3 and 10 on "Sheet 1".
Lets say the cell reference C10 is now entered into cell B1 on Sheet 2. How do I modify the above formula to reference B1?
I have tried INDIRECT function but can't get it to work.
View 5 Replies
View Related
Sep 14, 2007
I have two cells (c1 and c2).
c1 contains (2+3*4)*3 without "=" at start.
c2 must contain the result of c1 it means 42.
In the attached file I have a few variants I tried to solve it but they both don't fit.
Formula.xls
View 5 Replies
View Related
Sep 14, 2007
I have two cells (c1 and c2). c1 contains (2+3*4)*3 without "=" at start. c2 must contain the result of c1 it means 42. I think it has a very simple sulution but I don't know it. In the attached file I have a few variants I tried to solve it but they both don't fit.
View 3 Replies
View Related
Feb 11, 2008
I am trying to figure out how to not allow a word to be type into a cell. I am relatively new to excel and I am working on a spreadsheet where I do not want the word TOMORROW to be allowed in a cell.
View 9 Replies
View Related
Apr 6, 2007
I want a macro to select the cell with i type. Like i type in cust-0001 and it selects the cell which has cust-0001. I then want it to select the cell in column C that is in the same row with that value. E.g. Find cell in column A with value cust-0001 and then select the cell in column B in the same row.
View 4 Replies
View Related
Nov 9, 2008
How do I determine a cell's type (e.g., numeric or string or formula) and if numeric, the format (e.g., currency, general, scientific) including the number of decimal places.
Is there a function that returns the object's properties? Must I use isnumeric, isformula, and so on or is there one function that returns this information?
View 3 Replies
View Related
Mar 11, 2008
The goal is to type a number in a cell (G4) on a worksheet, and then look it up in different work sheets (JANUARY THROUGH MARCH) in a different workbook,(NEW DAILY SUMMARY.xls) Once found, import the value of the cell next to were the number was found....
View 14 Replies
View Related
Dec 3, 2007
is there a way to type a number into a cell and for it to alter the cell upon hitting enter?
for example...
typing -10
and it displaying -10 / 14 in the same cell
View 9 Replies
View Related
Jul 27, 2007
Does anyone have any clue of a VBA function that gets a cell and Changes the type of it´s contense?
I have been using the Cstr function as in the next example but I dont get the result I want
hojaRES.Cells(i, 6) = CStr(hojaRES.Cells(i, 6))
If IsNumeric(hojaRES.Cells(i, 6)) Then
MsgBox "nothin changes :("
Exit For
End If
hojaRES.Cells(i, 6) = "0" & "34" & hojaRES.Cells(i, 6)
My problem is that i want to add 034 prefix to a telephone number, and as it treats the data as numeric; number 0 (before34) is deprecated
View 3 Replies
View Related
Oct 21, 2007
How can I identify a cell type at excel sheet (w/ VBA command) ?
I find this command (from Access forum):
http://www.thescripts.com/forum/thread601180.html
but its working only with Access...
View 4 Replies
View Related
May 1, 2014
(3) examples when I type a number to a cell:
If I type a number "1", I want that cell to show 1.000% but not 100.000%.
If I type a number ".2", I want that cell to show 0.200% but not 20.000%.
If I type a number "25.5", I want that cell to show 0.255% but not 2550.000%.
I play around with the below custom format cells but they do not work.
_0.01*#.000%
_0.01*#,.000%
0.01*#,.000%
I could use two cells one for number, other cell has a % mark. But I rather to format a single cell if it is possible.
View 4 Replies
View Related
Aug 25, 2014
I have a workbook that includes a drop down list with three options. One of the options is "TA". The default font type for these cells is "Wingdings" but when "TA" is chosen I want the Font Type to change to "Arial".
View 11 Replies
View Related
Mar 19, 2013
I have a big list of words (raw materials). Can I for example use column1 in which if i type one letter a list of words that begin with this letter to come out so i can choose one.
Or I have for example:
Label 1
Label 2
Label 3
And when i type L in cell A1 list of them to be shown and I can choose one.
View 2 Replies
View Related
Dec 13, 2011
Is there a code that changes any numbers stored as text into regular numbers?
View 3 Replies
View Related
Jun 20, 2012
I have some tabs that are color coded. What I want to do is:
1. Depending on the tab color on Sheet A, have it compare that color to a set of cell colors on Sheet B that have descriptors next to them,
2. vlookup the descriptor on Sheet B and
3. put the descriptor into cell A2 of sheet A
How I would go about accomplishing this?
View 1 Replies
View Related
May 9, 2013
I have several textboxes that are not on a userform; they reside on worksheet A. I want to format these textboxes so that they only accepts numberical values (like 500,000....no dollar sign and no cents needed). After typing in 500,000 lets say for this example, I want to paste it into a cell in worksheet B (I can actually handle this part). What iIcan't handle is:
Formatting the textboxes so that they only accept numbers (or display a message if a number is not entered) Display the 500000 as 500,000 in the textbox without the user having to enter a comma Hitting enter or tab to get the value from the textbox into the cell in worksheet B. It only pastes it into worksheet B when I click on another cell. That doesn't seem like the right way to enter data.
I am wondering if I just should have used a userform and added the controls onto it. I have 8 sets of 5 user controls; I thought this would be easier.
View 1 Replies
View Related
May 23, 2009
I am in a role that has recently required me to do scheduling for employees every week. The schedule is 6000 rows of sites with columns A-N used for data such as site #, date, address, tech name. I want the tech name to be associated with the site number. Example:
Site Date Tech Name
413 5/17 Joe Smith
413 5/29 Blank
How do I get "Joe Smith" to magically be linked with site 413 and automatically populate in 5/29 when I enter it in initially for 5/17? I want all the techs to do the same sites from start to finish but the data entry is brutul. I am very basic in excel. Ultimately, I want to type the number 413 and have Joe Smith appear in the Tech cell. Is this possible?
View 9 Replies
View Related
Nov 4, 2006
I'm trying to write a Macro that, in the active sheet (which contains plenty of data), deletes rows according to several criteria, for example:
- if cell(i, ar1(j)) = ERROR, delete row i and shift 1 up
(ar1 is an array of column numbers)
- if cell(i, ar3(j)) = 0, delete row i and shift 1 up
(ar3 is another array of column numbers)
Etc.
The problem is that, when I run it, I get a "Type Mismatch" error message, and I don't understand why. Here is the
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1, ar2, ar3, ar4 As Variant
Nr = 1379
ar1 = Array(11, 14, 19, 20, 22, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 104, 106, 107, 109, 112, 116, 126, 127, 128, 129, 131, 133, 134, 135, 136, 137, 138, 139, 140, 142, 143, 145)..............
View 6 Replies
View Related
Sep 26, 2013
I'm trying to apply the code for accumulating value in a single cell to a range of cells.
I want to use the code found in this thread [URL] ..... but, it only lets me edit "B1" to another single cell. I need my cells G4 to G469 to operate the same way.
How to edit the code so I can include a range or show me a version of the code where I can enter my desired range?
View 2 Replies
View Related
Aug 10, 2009
My excel recently the General number format so that when the general number fomat is used and I type a number in a blank cell with the general format, the number is always divided by 10.
E.g., I enter "102", the number is automatically improperly converted to 1.02.
However, if I enter "=102", the number is properly entered as 102.
How can I reset the General format to the original setting without this divide by 100 problem?
View 3 Replies
View Related
May 12, 2010
I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
View 8 Replies
View Related
Feb 6, 2014
Like u see in attachment i have products in cells wich are painted in different colors. I need to compare two numbers of different product, and write result to column "Type D,C,B". If one of two products is without color/white or they are not the same color then result is always "D", if both products/cells have same color and different number then results is "C", if the color and number is the same then result is "B"
Below cell B2 I will write numbers by hand, when I finish and start macro it will compare first cell B2 and B3 and write result to C3, then compare B3 and B4 and write result to C4 and do that until there is any number in column B:B.
Attached File : excel help.xlsx‎
View 8 Replies
View Related
Aug 23, 2013
I have a spreadsheet with a VLOOKUP formula that I have to send to a customer weekly. They are required to type a code in column E of what they invoice, and it pulls the rate into column G based on a rate table I have. The formula is: VLOOKUP(E2,Rates!A:B,2,0)
When I made the spreadsheet, the formula worked perfect. But when they type their codes in and send it back to me, it's messed up. All of the codes they've typed in do pull the correct rate. However, if I try to go to column E and type a different code on top of what they typed (a code that IS IN the rate table), it will tell me: "The value you entered is not valid. The user has restricted values that can be entered into this cell".
If I create a new tab and mimic the exact formula and columns as I am trying to work with, it works perfectly. But for some reason, once they've typed their data into my spreadsheet, something messes up even though the formula is perfect, dragged down, etc. All columns are formatted as text. And the range in the rate table is correct as well. When I try to mimic the formula in the other tab, if I click a cell in column E, there is a drop down list there showing all the available codes from my rate table to choose from. But on the spreadsheet that is messed up has no drop down list on the cells.
View 1 Replies
View Related
Oct 2, 2013
I am trying to achieve the below objective but getting error message
Objective: select last non blank row and offset to next cell type a message in it
error message: Runtime error 1004 : method 'Range' of Object '_Global' Failed
CODE:
Sub lastRowAll()
myvar = ActiveSheet.UsedRange.SpecialCells(11).Column
myrow = ActiveSheet.UsedRange.SpecialCells(11).Row
Range(myvar, myrow).Offset(0, 1).Value = "Experiments with VBA"
Range(myvar, myrow).Offset(0, 1).Activate
End Sub
View 6 Replies
View Related
Nov 28, 2007
I'd like to add items on a UserForm1 ComboBoxes in the correct order but I can't. That's because with the code below, in ComboBox6P1 the items are added with mixed order:
For Each thing In .Range("AC6", .Range("AC65536").End(xlUp)).SpecialCells(xlCellTypeConstants)
If Trim(ComboBox4P1.Text) = thing.Value Then
For Each aNew In .Range("AD6", .Range("AD65536").End(xlToRight)).SpecialCells(xlCellTypeConstants)
If aNew.Row = thing.Row Then
ComboBox6P1.AddItem aNew.Value
End If
Next
Exit For
End If
Next
I should add items in ComboBox6P1 in order -> AD6, AE6, AF6, AG6, AH6, the rest are empty cells. Instead of it adds AF6, AG6, AH6, AD6, AE6. When I change .SpecialCells(xlCellTypeConstants) to .SpecialCells(xlCellTypeVisible ) it adds it in the correct order but with another 200 emtpy cells in the ComboBox6P1. The format of the cells is General.
View 9 Replies
View Related