I am trying execute a VLOOKUP and counting a specific cell, if it's data is greater than 0 for nine different files, essentially summing the number of data points. Below is the beginning of my formula.
Code:
Range(Range("W8"), Range("W" & Analyst)).Formula = "=COUNTIF(VLOOKUP($A8,'" & Folder & "[" & Barker & "]" & A & "'!$A8:W500,23,0),"">0"")+COUNTIF(...
I can't seem to get the OR( operator to work in conjunction with AVERAGEIFS(. In the example below, Quality is the name of the table and Call Rating is my average range. Quality[Manager] is Criteria 1 range and I would like it to use only Manager 1 and Manager 3.
=AVERAGEIFS(Quality[Call Rating],Quality[Manager],OR("=Manager1","=Manager3"))
I thought that an OR( operator would work perfectly, but no matter how I vary the syntax it always give me a DIV/0 error.
I am using the below formula to calculate average handling time for a call center agent then converting that to a percentage. Instead of the agents score showing the percentage I would like for it to show a "label" based on their level of performance. 50% = Below Average 75% = Average 100% = Above Average
=IF(G15="","",IF(G15<=375,"100%",IF(G15<=405,"90%",IF(G15<=450,"80%",IF(G15<=475,"70%",IF(G15<=600,"50%",IF(G15>=601,"0%",0)))))))
How can this be done?
I would like to start with a spending value, (SV), that would be the amount of money that I want to spend in a year, not counting taxes. The function (or functions) would then go through some sort of iterative calculation process that would compute the total spending level including taxes, (TS), the federal tax, (FT), and the state tax, (ST).
These values would have the relationship that TS=SV+FT+ST. When the iteration was finished, the federal tax and state tax amounts would be consistent with the taxes that would be due for this level of total spending as determined by the normal tax tables for both federal and state taxes.
I am not concerned that the tax figures be absolutely exact, so a lot of iteration is probably not necessary.
I am trying to make a calculator inside of Excel...learning how Text Boxes work in conjunction with CommandButton. I am trying to code the button to display inside of the text box. I have never coded a text box before to do anything like.
note: For right now i am just looking at being able to click on a button [numbered 0-9] and have them dsplayed inside the text box. After that I want to be able to set up an addition, subtraction, etc button to actually have the math done.
(ie...if Button 1 is clicked, 1 will be displayed, if Button 2 is clicked the display will adjust to show 12, etc etc)
My boss has asked me to work this one out and is putting me under great pressure to resolve it. I have tried Vlookup and COUNTIF etc but just cannot get to make it work. I have attached an example file but to explain:
I have a database of inspectors faults, in column B, I have the week number, column*C, I have the part number & column C the fault category (this includes OK). The actual database is up to 5000 rows now.
What I need to be able to do is in one cell (column H2) count all the OK's for week 1 and all the Not OK's (column I2) in week 1 and the same for week 2 (column H3) and week 3 (column H4) and so on for the whole year. I have tried a vlookup using cell G2 (containing "1") as the search and the week number column as the range and then counting if OK, but it never worked!
Hi guys, hopefully you can shed some light onto this small problem I am having.
The current formula I'm trying to use is:
=IF(VLOOKUP(A4,EPG1!D4:AN26,6,FALSE),COUNTIF(PASS,""))+IF(VLOOKUP(A4,EPG1!D4:AN26,6,FALSE),COUNTIF(F AIL,""))
This isn't producing the desired results.
What I am trying to do in words is this:
IF... in this array it equals A4 then look at coloum 6 and then Countif col 6 says Pass and then add another if it says Fail....
In the attached sheet I have a list of names with hours overtime hours worked. I want a small table on the sheet which looks up when "name x more" occurs. In cell C14 for example I want it to count the number of times "Mark More" occurs in column I, but the name may change in C13, so I want to automate this - so the countif in cell C14 will reference whatever text is in C13.
View 2 Replies View RelatedI am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx‎
I have two columns - Employee and Status of Deal. Now, I need to get the total count of New and Active-to-date but on a per employee basis. Am I making any sense? To clearly put it, I need a formula that will answer the questions below:
How many New and Active-to-date deals does Michael et al have? I tried to use Countif but that gave me the total number of deals, not on a per status basis. Will VLookUp work or a combination of both? If so, how? I'm using Excel 2003.
On attached Spreadsheet, we are using Vlookup to create Team pages for coaches. Works great for giving coaches a team sheet when they leave draft. I have been aasked if we can cultivate the info a little differently for ubiform screenning. Company wants a count of sizes by position, that is everyone in position 1 will get number 40. How many #40 AS, AL, AM do we need.
There are 157 teams. SO I need to loop throgh each team, pull each size for each position and put it on Size sheet. I was thinking a vllookup/countif or sumif combo would work but have not been able to come up with it.
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I have a simple database spread sheet and I need to count a column under certain conditions. In one column I have employee names that appear repeatedly, in another I have codes. I want to be able to count how many times the code appears next to the name.
For instance:
If b4:b65000 = Sam Douglas then I want to count how many times different codes appear in the adjacent cell.
Sam Douglas:BI
Sam Douglas:BI
Sam Douglas:SI
Sam Douglas:BI
BI = 3
SI = 1
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I have following data (two columns Parent and Child), now I want to apply Countif on Child cell.
But in Countif I want to provide the criteria...let say only count those childs whoes parent is A.
How to do this in Excel.
Parent Child
A e
A f
B g
B h
B i
C j
C k
I'm reasonably new to Excel, and have a fairly basic question to check out:
I have been using the COUNTIF function to count up numbers of items in various categories in a column.
The formulae I have been using are like this:
=COUNTIF(F$3:F$201, "Red")
or where I've wanted to combine various comments
=SUM(COUNTIF(F$3:F$201,"Yellow")+COUNTIF(F$3:F$201,"Cream"))
I'm not sure what formulae to use to count up
1) the total number of entries in that column, so that I can make sure that I haven't missed some (without having to check manually!)
2) how to count up the values that do not match the other categories that I have specified in the COUNTIFs: this would be a value for finding how many 'other' entries there are in that column, without having to specify those values
I am trying to use COUNTIF with two critera. If this isn't possible is there any other way possible of doing this in a range of cells.
What I am trying to do is show the amount of students in a year group who spend x amount of hours on the internet and have a target grade (for example) of Lvl 4
I have been trying use a formula along the lines of =COUNTIF (Q5yr7, "0- 1Hour", Q12yr7, "4")
important columns are: "D", "G", "L".
this is about a project is a granite to be installed in 104 units, these units are divided in 4 types (column "L") K1, K2, K3, K4
I tried IF, SUMIF, COUNTIF, ETC but I think that I need is some combined function that I'm not able to figure out.
as you can see in the attached file, my units 101, 102, etc is not been installed yet (column H is empty), but the units 209, 210, 211, 214 yes was installed on 5/6 for example.
for example, if i use =COUNTIF(H4:H20,">0"), will return me all the H that is not empty (=3), how many kitchen was installed so far, but, I would like to know how many of these returned units (3), is my different types: K1, K2, K3 and K4....
I am trying to count the status and type of some work so:
Column A would contain the status of the work e.g. open, in progress, closed etc.
Column B would contain the department: ict, development, operations, etc.
I want to do a summary that shows: How many are in ICT are open, closed etc.
I can do a countif to get the total open, in progress etc or total number of ICT jobs but not ICT In progress.
What i want to do is count but only if another cell meets a certain criteria,,
Let me explain better,,what i want to do is count the number of 'Completed' cases by each individual, i.e. count if the cell A1 = Completed and B1 = Kevin and the same for 'Pete'
I'm sure i need some sort of nested =IF AND formula but just can't think how the nesting should look.
B
CompletedKevin
CompletedPete
CompletedPete
Parked Kevin
SubmittedKevin
CompletedKevin
Started John
With AdviserPete
With AdviserPete
Started John
Started John
I have attached a copy of my spreadsheet .My formula is in column BA and I am trying to figure out which students have 5 A* - C. We are only allowed to add 2 vocational subjects to this formula so basically 3 (or More) GCSEs + 2 BTEC/OCR Nationals. Now my formula works pretty well except if the candidate has 4 GCSEs and 0 or 1 BTEC it is still calculating as though the candidate has achieved 5 A* - C.
I have highlighted GCSE Subj in pink and Vocational Subj in Puple.
I've been asked to extend the counting capabilities of my interface to pick up the profession of each person when they answer whatever is selected in the 'Interface' worksheet (cell B2) put them in my interface.
I've been trying various incarnations of SUMPRODUCT along with what DonkeyOte helped me with before, but currently no joy. Hope that makes sense - have a look at previous post for further details. I've attached an example to look at.
- Column D includes dates.
- Column E includes text, either "Yes" or "No".
I want Excel to count all cells in Column D between 1-Jan-2009 to 31-Jan-2009 + any cells that say "Yes" from Column E on the same row.