Excel 2010 :: Countif And VLookup Of Multiple Values

Jan 15, 2014

I am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.

I have attached a sample workbook as a reference : Sheet1.xlsx

I am using Excel 2010. I have a spreadsheet where column A is for Quarter, column B is for Employee, and columns C-R are for Codes (Code1; Code2; Code3; etc. through Code15). One line might have no values in the codes columns, another might have values in only Code1, another might have values in Code1 and Code2, and another might have values in all 15 columns.

A B C D E F --> R 1 Qtr Emp Code01 Code02 Code03 Code04 --> to Code15 2 2012.1 Liz CER02 INS12 WKH15 3 2012.2 Jim PIN55 WKH12 WKH19 WKH23 4 2012.2 Jon 5 2012.2 Jim WKH15 WKH23 6 2012.2 Jon PIN55 WKH15 WKH12 CER08

The worksheet is named "ALLAUDITS" and the named ranges are as follows:

On another worksheet I need to be able to count how many times WKH15 appears in the CodeData range within a certain Quarter. I tried

=countifs(Quarter,"2012.2",CodeData,"WKH15")

But that didn't work, and from what I can tell in Excel support, it's because the ranges are different sizes. I have over 6500 rows, so I'm trying to avoid having to name all 15 columns and then do a sumproduct on all of them, such as

I could just create a pivot table based on the "allaudits" worksheet, but I can't figure out how to get the actual codes as the row headers (instead of Code1, Code2, Code3, etc.).

I have a spreadsheet (Excel 2010). I want to fill categoryid in Sheet One based on values of Skill and State which are part of field in Sheet two.

Sheet One (Has Four Columns and I am looking for filling CategoryID based on Sheet Two FirstName LastName Skill State CategoryID John Edward Ballet California Ed Catalino Tap London Natasha Curtis Ballet Australia Shen Watson Modern Kansas

I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem

I have made a spreadsheet where I want to input data and transport it to a rent card information.

I want to use vlookup to find the apartment number in a different spread sheet and fill in the information on a different spreadsheet (rent, fees, utilities).

I get how to use vlookup to get one value but I need 10 values to return.

I have in column A duplicate values and in column B different responses (Sheet: Lookup). I need to look up the value in column A (Sheet: Results) and bring back all the responses in column B (horizontally).

When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.

If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.

I have a spreadsheet with two date/time columns 'Date1' & 'Date2'. Each date/time column has its own column with corresponding values ('Var1' & 'Var2'). These dates cover the same time period, however values for 'Var2' were collected less frequently than 'Var1'. I want ONLY the values in 'Var1' that correspond to the dates in 'Date2'

I am trying to select values from one column 'Var1' which have correlating date/time in column 'Date1' that match the dates specified in 'Date2'. Basically I need the values from 'Var1' that match the same date/time as 'Var2'

I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).

I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.

Using Excel 2010, I am trying to do a Sumproduct formula with two criteria, one of which needs to ignore text values.

Here is the set up:

Column AColumn BColumn C (Side)(Qty)(Price) Buy5,51215.67 Sell119,428null Buy24,20945.77 Sell20,05412.25 ...

I'm trying to find the sumproduct of Qty * Price if the side equals "Buy" (or "Sell") but ignoring the "null" value in column C. The formula I have is =SUMPRODUCT(--($A$2:$A$20="Buy")*IF(ISNUMBER($C$2:$C$20),--($B$2:$B$20*$C$2:$C$20)))

The result in the cell is 0, but if I open the Insert Function dialog box, I see the correct value being returned.

I've found a nice looking formula for looking up multiple values from a Data Validation List which you can find here.

Unfortunately I dont know why im getting a #REF! error for one of my spreadsheets. Here is my Formula {=SUM(VLOOKUP(A2,D:D,{6,7,8},0))}

A2 is the Data Validation drop down list that has most of the Values (Letters & Numbers) I want to look up. D:D is where it will find the Values (Letters & Numbers) and {6,7,8} is the currency I want added up and displayed.

I've tried this formula on other spreadsheets with success, but no success with the spreadsheet im working on currently.

I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.

I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).

For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?

In excel 2010, I have 2 spreadsheets, the first "Active Total Master Turn" has the data, the second, "Pending" has a reporting chart. A cell on "Pending" contains the following formula:

=COUNTIFS('Active Total Master Turn'!F:F,"RK*",'Active Total Master Turn'!H:H,"Painting",'Active Total Master Turn'!C:C,"

I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.

On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.

I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...

I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.

I was wondering if it's possible to use a countif so that the condition can be a range of values also? For example, A1 = 14.12.08, A2 = 15.12.08 and A3 = 16.12.08

So I can have a countif that looks like: Countif(B1:B300, A1:A3). It doesn't work when I try it, but was wondering if there's a way to achieve the same result? So if B1:B300 contained any of the values in A1:A3 it would count the amount of times they appear in the B range.

Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.

What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.

So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.

The code I came up with so far looks like this:

Function AK_Overlap_Go(x, y) Dim Temp(1 To 2, 2 To 1) Dim x As Integer

[Code]...

One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.

Is is possible to construct a vlookup to identify that there are duplicate values in the Lookup_value and the Table_array and return the second and third values in the Formula result?

In the acutal project the Lookup_values and Table_arrays are in separate worksheets, but I think the example below represents the issue I'm working with.

I have a table in columns A-D. I am trying to perform a vlookup to return the first non-blank in columns B-D based on the lookup value in column A. Columns F-I are what I am looking for the formula to do. I think I am close with the following array formula but not quite there.

Excel 2010LMN12#N/A3Sheet1Array FormulasCellFormulaM2{=INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE), MATCH(TRUE,INDEX(INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE),0)<>"",),FALSE))}Entered with Ctrl+Shift+Enter. If entered correctly, Excel will surround with curly braces {}.

Note: Do not try and enter the {} manually yourself

We have a business system which has some very disjointed reporting. To fix this I have multiple extracts that are then combined into a single report. I then add Year & Period from a lookup of a date in a particular field. Unfortunately most values are returned as #N/A but if I manually go into the sheet and select an offending cell and click then magically the formula then corrects itself.

So I thought I would be clever and use Sendkeys {F2} as part of my code. Unfortunately this is a bit hit & miss as it works on some but not on others. Also the Sendkeys piece repeats itself leaving my frontsheet a 1000 rows from the start. This is easily fixed by selecting cell A1as the last step.

My question is there methods in VBA by not using sendkeys that will achieve the same result and is consistent. I am using Excel 2010.

Code: Sub Add_Calendar() Dim cell As Object, c As Range

'setup for calendar data population ' Range("H1") = "Created Date" Range("N1") = "Year" Range("O1") = "Period" 'copy the format

I am using the following formula to copy the name of the tab - =MID(CELL("filename",C26),FIND("]",CELL("filename",A1))+1,6)

I have a marco that creates a tab from a Master file, and I need to copy the name of the tab into cell A2, using the formula above. Then I use a vlookup on this cell, to get the data needed for about 10 other fields. I have these vlookups in the Master file. The vlookup doesn't work all the time. I get a #NA answer. Sometimes it does work. When I manually type in the project number on the tab, the vlookups work.

Sample of the vlookup: =VLOOKUP(A2,'AC-Program'!$A$1:$H$58600,2,0)

I was trying to find a way to use a value in cell A2 instead of the formula above, but I don't want to have to manually update it, I need it to be generated when the Marco generates the tabs.

Here is my macro:

Sub CreateSheetsFromAList() Dim ws1 As Worksheet Set ws1 = ThisWorkbook.Worksheets("Master")[code]......

Is there a way to add this function into this macro, and it will leave this field as a value instead of a formula?

How many tickets are created and fixed by a user for a certain period. See below. I've tried countif but it doesn't seem to be working for many criteria.

I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)

The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.

Sample data Required Output A | B Z 1| 10 | a 10,a,b,c 2| 10 | b 11,a 3| 10 | c 12,a,b 4| 11 | a 5| 12 | a 6| 12 | b

if I change a value in the range named "Named_Range" this vlookup does not update.

This formula works but does not allow for any updates. Meaning the vlookup returns the original value even after a cell has been changed. "Named_Range" is on a different sheet but in the same workbook.

Auto calculate is on. I have recalculated the cell manually. I have Office 2010

I am using the this formula to look up data using 0 to show not found. VLOOKUP is acting case sensitive. The Master Array data is in caps and the input is in lower case. There are no spurious spaces. Here are the results:

Code Name 0 River Branch Foundation = not found X RIVER BRANCH FOUNDATION = found - in array as caps