Use One Big Picture To Fill Instead Of Gradient Fill?
Jul 21, 2014
I am currently working on a project and want to use a picture of a cauldron and have that filled in as opposed to a bar graph filled with cauldron pictures. Is this possible? I picture something similar to how someone would fill a picture on a piece of paper until they hit their goal.
Secondly, If I need to do a bar graph I know I can do conditional formatting on the values within their cells but can I create this formatting specifically to the graphs themselves?
View 1 Replies
ADVERTISEMENT
Jan 3, 2012
I'm trying to format the plot area of a X-Y scatter chart in a three colour gradient (Green, Yellow & Red).
The trick is, I would like the green portion to be centred in a user defined place on the plot with the yellow radiating from it, and the red radiating from the yellow. Ideally I would like to define some stops for the green as a user defined shape, with stops for the yellow outside the green stops (like the % stops you get in a vertical or angled gradient, but instead of the stops being simple straight lines or concentric circles from the middle, they would be user defined shapes).
I can do the normal types of gradient, but have no idea how to customise them in this way.
View 5 Replies
View Related
Aug 21, 2007
The following works perfect in 2003.
Private Sub CommandButton1_Click()
Dim shpTemp As Shape
Set shpTemp = Worksheets("Sheet3").Shapes(ListBox1.Value)
shpTemp.Copy
With Worksheets("Sheet1")
.Activate
. Range("A1").Select
.Paste
Set shpTemp = .Shapes(.Shapes.Count)
shpTemp.Fill.UserPicture ListBox2.Value
End With
End Sub
However, when run in excel 2007 the shape is not filled. If you right click the shape, format shape and click on the "Picture or texture fill" it will fill the shape with the previously selected picture in the userform. I have tried by adding
shpTemp.UserPicture.Fill.Visible = True....................
View 9 Replies
View Related
May 14, 2014
I have set up a rollover hyperlink so that when I hover over the cell it changes colour and creates a good effect. To do this I have another cell on the sheet that turns to 1 when the cell in question is hovered over.
I need a code so that when that cell displays the number 1. the object (which is rectangle 2) changes from white fill. to a picture I have saved on my desktop.
I cant quite figure out the coding and have been messing about with things like..
if cell range e.g a1 = 1 then rectangle 2 .userpicture " path " else .solid etc.
View 10 Replies
View Related
Nov 7, 2008
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
View 9 Replies
View Related
Apr 30, 2014
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
View 6 Replies
View Related
Feb 1, 2010
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
View 4 Replies
View Related
Jul 13, 2012
I'm trying to loop through a list of about 1300 items and copy the rows where one of the cells has a fill color to 2 different sheets in the same workbook. If there's no fill color, the row moves to a different sheet.
My code is determining that all cells have a fill.
For Each cell In Range("Classification")
If cell.Interior.Color blank Then
cell.Select
Range(Selection, Selection.Offset(0, -9)).Copy Destination:=Range("Compliance")
Range(Selection.Offset(0, -5), Selection.Offset(0, -9)).Copy Destination:=Range("Mstar")
Else
cell.Select
Range(Selection, Selection.Offset(0, -9)).Copy Destination:=Range("RP")
End If
Next cell
View 3 Replies
View Related
Jul 13, 2007
Conditional formatting is lacking. I need to colorize each data point on the graph according to a characteristic cell (not an x-axis or y-axis variable). I have done something similar by simply graphing a group of points as a series and changing the series color. I'm looking for a more graceful solution. From the example picture attached (i would attach a workbook, but the data is sensitive), a point is charted based on two variables and colorization is attempted based on the third variable. i would find the range of the third value, assign a gradient based on the spread, and colorize each point. My VBA syntax is lacking for chart functions
View 7 Replies
View Related
Aug 21, 2014
I have Column with numerical series.
Like,
Column A Column B
B6 1
B7
B8
B9 2
B10
B11 3
B12
B13
B14
B15 4
B7 and b8 is blank above, so want VBA to automatically put preceding value as "1" in B7 and B8. Same way B10 which is blank, have the preceding value 2 to update there. Like wise do for all below. Update preceding value.
View 2 Replies
View Related
Oct 22, 2007
I have having trouble here with this code below, as I have fill down range to AM11:AM55, but when i delete or keep adding new rows, an error appears saying out of range. So how can i get the fill down to fill to the last row i have?
how to get this to work without error appearing?
Range("F11:F500").Select
Selection.ClearContents
Range("H11:AM500").Select
Range("AM500").Activate
Selection.ClearContents
Range("AM3:AM5").Select
Selection.Copy
Range("AM11:AM13").Select
ActiveSheet.Paste
Range("AM11:AM13").Select
Application.CutCopyMode = False
View 4 Replies
View Related
Oct 22, 2007
I'm sure the answer is simple, but I can't seem to get it.
B2 = "T1"
I need B3 to be T2, B4 should be T3, etc. I know i can fill this down, but is there a formula or something.
View 6 Replies
View Related
Jul 14, 2008
I have a list of SSN #'s. I need to increment them by 1 - but in the middle. For example:
001-01-0001
002-01-0001
003-01-0001
Get it? That third number is the one I need to increment by 1 and fill down the column.
View 10 Replies
View Related
Aug 4, 2008
I am trying to type in a number and have it populate in specified areas like on Monday then go to the next Monday an in put of the same value.
View 8 Replies
View Related
Dec 21, 2008
Can anyone supply a formula which can be filled down column J of s/s. The formula should look at column H and find those cells where the content of the cell is lower than the one above it. I supply, in the enclosed attachment, three examples and have marked with an X any qualifying cells in adjacent column I. The formula needs to incorporate cells above and below so as to produce a running average whereby no above cell is higher than any below.
View 5 Replies
View Related
Apr 20, 2009
I'm looking for an easy way to fill-in 1600 cells, in Col. "A", with pairs of sequential numbers [from 1 to 800] - for example:
1
1
2
2
3
3
4
4
5
5
6
6
I managed to achieve something close with: =INT(ROW()/2.05)+1 but this is not accurate enough.
View 2 Replies
View Related
Apr 24, 2009
How can I fill downwards the following formula?
=(SUM(B$2:B13)*0.05)*(J2/12)
=(SUM(B$2:B12)*0.05)*(J3/12)
=(SUM(B$2:B11)*0.05)*(J4/12)
View 4 Replies
View Related
May 13, 2009
Is there an easy way to fill down this formula?
=SUM(INDIRECT("F$2:F"&ROW()-6))*0.8
=SUM(INDIRECT("F$2:F"&ROW()-8))*0.8
=SUM(INDIRECT("F$2:F"&ROW()-10))*0.8
View 2 Replies
View Related
Aug 10, 2009
I would like to fill down references in a column this way: =A1 =A2 =A3 consecutively. Is there a way to do this?
View 7 Replies
View Related
Aug 3, 2014
I'm looking to create a macro, one where depending on which the active cell is, if I hit say Ctrl + Shift + D. The macro would fill down the row I selected one row, but there are certain columns I want it to fill down: I want it to Fill Down columns: A to E, G, I, K, M to P, R to T.
For example, my cursor is in cell N45, I want it to fill down row 45, but only columns A to E, G, I, K, M to P, R to T to row 45.
Can this be done. My testworkbook is attached.
View 9 Replies
View Related
Aug 22, 2014
I wrote below code, I am expecting column to be updated as 1, 2, 1, 2, 1 ,2 till last row, but it is updating as 123456...
[Code] .....
View 2 Replies
View Related
Mar 18, 2014
I am creating a simple userform wherein when I clicked the save button, it will look for the value of a textbox in the excel column then it will save the details on that row. For example, the value of textbox is "12345" and it is located on D5, the value of textbox2, textbox3, textbox4 will be saved in E5,F5,G5.
View 2 Replies
View Related
Oct 14, 2008
i have attempted may be totally in the wrong direction. I have a worksheet where column A should hold the same value for many Rows of information, but instead only prints once in the first row of that section. The # of rows in each section vary; sort of like this - where ... is a blank cell:
A 1
... 2
... 3
... 4
B 1
... 2
... 3
I would like to write a macro that loops through Column A and replaces empty cells with the most recent value. When i run the following code it puts the value in the blank cell, but fails to loop to the next.
View 3 Replies
View Related
Jan 27, 2009
I am trying to color code certain rows in my data. there are only two columns a, column b. my code below will look at some row number in column 1 and look for a value "total", then again, look on the same row number, column 2 and look for value "1", then color fill it.
View 2 Replies
View Related
Jan 27, 2009
I'm creating a financial document, the currency is in £ and then I'll need to convert to $ based on the decided rate. So I'm trying to make 1 cell (A1) as my current exchange rate and then have the formula =sum(B5*A1) so that if the rates change, I can just change that one cell and all will be updated. I'm doing this for hundreds of rows so I need an efficient way to do that.
The problem happens when I try to continue that formula down for B6, B7, etc. It just keeps changing A1 to A2, A3, etc, it's filling down that as well and I don't want it to.
View 2 Replies
View Related
Jun 8, 2009
I need it to autofill just as if you selected range A1 and A2 and double clicked that little square on the bottom right hand side of the cell (so it stopps auto-filling at the last active cell in B)
View 5 Replies
View Related
Jun 8, 2012
All the Prod ID's are unique in column D and the base price in column E varies
I need to fill down columns A,B and C with the data from D and E
A quantity value of 4 in column A reduces the base price by 4, qty of 10 by 9 for all product ID's
Columns D and E have over 1,000 rows
*ABCDE1pbQuantitypbProdIDpPriceProd IDBASE PRICE21LG2_button_phone49LG2_button_phone4932LG2_button_phone
49Avaya_2050_phones7943LG2_button_phone49proV_nec750ip4954LG2_button_phone
45proV_nec730ip4965LG2_button_phone45proV_nec710ip4976LG2_button_phone
45proV_tosh5132fsd4987LG2_button_phone45proV_office_phone4998LG2_button_phone
45proV_cheap_office49109LG2_button_phone45PRO-CISCO6921551110LG2_button_phone40PRO-
[Code] .........
View 8 Replies
View Related
Oct 31, 2012
I need to create a macro that searches for blanks in column G, from row 2 to the last row of the worksheet, and then inserts the value 1 in these blank cells.
I have been copy pasting different solutions from this site and amended them a bit, but my excel skill are not sufficient for this.
View 5 Replies
View Related
Jan 31, 2007
i typically have a difficult time figuring out how to reference cells correctly depending on the situation. anyways what i have is a formula in a cell and i want to fill in the next four cells to the right.
the help file gives:
Worksheets("Sheet1").Range("A1:M1").FillRight
View 9 Replies
View Related
May 18, 2007
I have a vba script, that imports data from a sql server and queries it in excel.
My question is, Could someone tell me how I could tell excel to color fill rows that if 3 different columns did not match, color the rows that the data is on ,red. ex:
row1 : column b2 =5, column c2=5, column d2=6 , row1 would not be red.
But if
row2 :Column b3=5 , column c3=6 , column d3=7 , row2 would be red .
View 9 Replies
View Related
