I have a range of numbers between 1 and 25 in 50 cells.
How could I use the countif function to look at that range of numbers for
values between 5 and 10 and count those values that meet the criteria of
between 5 and 10?
Or if there is another function to use, let me know.
I want to count all cells over 1000 and then I want to count all cells over 990, but less than 999.
These are the formulas I am using
=COUNTIF(CN3:CU65,">=1000")
=COUNTIF(CN3:CU65,">=990")
In this formula, the over 990 also counts the ones over 1000 and I only want them to count 990 to 999.
I am trying to do a basic count in a range, however am a little brain fried and its not working. On attachment, column D is to list all times out of column A and B listing only unique entries (have tried to use Macro with advanced filter however not liking it being an extract). Column E is to be a count of how many times the break time in Column D appears.
View 2 Replies View RelatedI am looking for a function that gives a range of numbers a score, here is what i need:
if A1 is between 6&15 B1=25 if A1 is between 16&35 B1=15 if A1 is between 36&65 B1=5 if A1 is 66 or more B1=0
is it possible to use the VLook up function to look at a range of numbers - I.e.
30-40, answer = 15%, I have tried 30-40 also 30,40 but none seem to work?cualte?
I'm trying to use the average if function to average a range of numbers, only if a different range of numbers numbers equal a number in two different cells.
ex. average A1:F1 if G1:L1 equals M1 or M2
Is it possible to create a string with a range of numbers
1
3
4
5
6
8
10
Result: 1,3:6,8,10
Or
1
2
3
4
Result: 1:4
Or
1
3
5
7
Result: 1,3,5,7
Where consecutive numbers are separated by a ":" and other numbers by a ",". I use the following function to create the ","-concatenate, but I don't know how to create the ":"-ranges.
Function AConcat(a As Variant, Optional Sep As String = "") As String
'By Harlan Grove, March 2002
Dim Y As Variant
If TypeOf a Is Range Then
For Each Y In a.Cells
[Code] .........
I need to create a custom function that can do the following without modifying the selected range. If I have data in a row, I need a function that can give me the following result:
Original unsorted data:
79
45
23
56
1
The custom formula will not modify the selected range, and after saving it or copying somewhere and sorting it, it will provide the following result: if N or count(range)=5 , and p=1, average(second and third smallest values of the range)=34; and if N=4 (lets say that we errase the number 1 data point in the range), average(third and fourth smallest values of the range)=67.5 So it is basically a sort and then getting the averages of specified row numbers depending on N or count(range) Here is what I have.
I'm missing how to create a variable with the sorted range and how to use an index to refer to the rows I want to average:
Function CSORT(r, p)
Application.Volatile
'rs or something similar that will contain the sorted range r
Dim rs As Range
'Sort rs (The following line one doesn't work, so I need one that does)
rs = Application.Range(r).Sort
Dim p As Integer
[code]....
i am trying to convert a range of numbers to text using the Cstr function ,it doesnt work. excel VBA help states that CStr function converts a numeric value to a String. i am aware that i can convert a number by preceding it with an apostrophe
i just need to know why Cstr doesnt do the job
Sub covrt()
For Each rng In Selection.Cells
rng = CStr(rng.Value)
Next
End Sub
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
I have a list of integers in a column, and I would like to count how many odd numbers there are. I tried using COUNTIF(D1:D33,MOD(,2)=1) and similar variations, but none seem to work. The numbers are ascending as the rows increase, but there can be blank cells in the column.
View 3 Replies View RelatedI have a large dataset in a table, each integer occupying its own column, and each row containing the full set of seven columns. Integers will not repeat in a row set (each is unique). I'm trying to identify when two or more integers appear together across a row set.
I'm using COUNTIF to identify the total counts for each integer, but do not know what function and syntax to use to count them together. I've tried combinations of COUNTIF, SUMPRODUCT, SUM and others but am clearly doing it wrong as I know that some do appear together, but I'm getting a 0 result with each try.
I am trying to create a formula, that I thought was going to be easy and I thought countif would work. i'm working on a spreadsheet which we need to determine the split dollar amount to divide between a number of employees who are owed a certain dollar amount. What I'm trying to do is get a count of how many employees in a certain range are above $0.01 and below $586.00 - I've written it the way I would think would make sense, and get the results I need, but it's not working. I'm not an expert and am not familiar with arrays or complex formulas.
View 3 Replies View Relatedimportant columns are: "D", "G", "L".
this is about a project is a granite to be installed in 104 units, these units are divided in 4 types (column "L") K1, K2, K3, K4
I tried IF, SUMIF, COUNTIF, ETC but I think that I need is some combined function that I'm not able to figure out.
as you can see in the attached file, my units 101, 102, etc is not been installed yet (column H is empty), but the units 209, 210, 211, 214 yes was installed on 5/6 for example.
for example, if i use =COUNTIF(H4:H20,">0"), will return me all the H that is not empty (=3), how many kitchen was installed so far, but, I would like to know how many of these returned units (3), is my different types: K1, K2, K3 and K4....
I am trying to count values in cells of column A only if there is something (any value) in corresponding cells in columns B, C, D, and E. If there are no values in cells of columns B, C, D, and E do not count the cell in column A.
View 10 Replies View RelatedI'm trying to do a count where column C="Employee" & column E="2008". Below is the formula I have tried and is obviously not working.
=countif(and(C113:C143="Employee",E113:E143="2008")
I'm trying to use the worksheet function countif in my code and it does not recognize it. But it does recognize counta. Here's a sample of my code.
Private Sub UserForm_Activate()
Dim MyUnion As Range
Set MyUnion = Union(Rows(12), Rows(14), Rows(16), Rows(18), Rows(20), Rows(22), _
Rows(29), Rows(31), Rows(33), Rows(35), Rows(37), Rows(39), _
Rows(46), Rows(48), Rows(50), Rows(52), Rows(54), Rows(56), _
Rows(63), Rows(65), Rows(67), Rows(69), Rows(71), Rows(73))
txtTtlDays.Text = Application.worksheetfunction.countif(MyUnion, "&A")
End Sub
I'm trying to figure out 2 seperate formulas - see sample data below:
1) how many are 0% (Answer: 3)
2) how many are greater than 0 but less than or equal to 24. (Andwer: 2)
I can't come up with the 2 calcs.
There is a formula in cells below (Example: =$BA150/$BA$3). Will my calculations just not work when there is already a formula in that cell?
14.3%
71.4%
42.9%
71.4%
0.0%
[code]...
I'm trying to create a formula to return the number of cells where the last 8 characters of a cell end with the string "landline"
My (failed) attempt at creating this is as follows:
=COUNTIF RIGHT(A2:A322,8)="Landline"
I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
Is it possible to use a variable in Countif?
See attached sheet. When a number repeats for the 3rd time, I need to reset the
Countif function.
For example;
Countif($A$5:A20,A20).
I need to change the $A$5 to the current row number so we can start the count again. I need to do this several times during the sheet.
We are counting numbers until they repeat for a 3rd time and then we start the count again at that point.
I am trying to count number of staff working in any day without deleting the empty cells.(see attached sample sheet). I tried sumproduct as I have two criteria but it is giving me a "zero" result. I only want to count cells in range B3:B32 that does not have "#" sign if there is a staff name if there is a staff name id corresponding cell in Column A within A3:A32.
View 3 Replies View RelatedI have a table in which we track our daily issues.. A1 - A6
Resource/Subject/Date/Time Of Failure/Escalated/Tech Int
I want to be able to count the amount of escalations we have per month...
We just enter a Y or N for the escalation field.
I'm not great with Excel and can do a count with the COUNTIF but don't know how to separate my results so that the count is done per month..
Can someone point me in the right direction?
*EDIT* Also my date format is as follow's 04-Jan-07. Should I change that to make it easier to calculate the results?
I am using the following COUNTIF formula which I am sure is supposed to prevent '#N/A' from appearing (According to [url]
View 12 Replies View RelatedI am trying to return how many cells contain a string of text as entered by the user but I am struggling to put wildcards around my search term. Below is the code I have so far.
Code:
Dim search as String
Dim occurance As Integer
search = InputBox("Search for", "Search Term")
occurance = WorksheetFunction.CountIf(Cells, search)
MsgBox (occurance)
How do I setup a COUNTIF function so that it 'searches/uses' more than one column for results.
Example: I have a spreadsheet with 20 columns - starting at A1 to T1 - and ending at A100 toT100. I want to use the COUNTIF function to 'search' all of these from A1/T1 to A100/T100 and tell me how many times the number 21 appears across that range of cells.
This COUNTIF function will reference data on a sheet called 50 - so at the moment my current single colum COUNTIF looks like this -=COUNTIF('50'!A1:A100,21) - and it works fine for one colum, but I need to search 20 columns.
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
and so on down the cells.
Look at 6 weeks of data, using "Tue" as the search parameter. I need to find the last 3 tuesdays (from current cell) and then sum the corresponding values in the cell I designate.
I'm fluent with LOOKUP and already have it finding and summing last few Tuesdays and corresponding sales totals, but I need it to only back THREE Tuesdays consistently, not 2 or 4, which it is sometimes doing now??? How do I force it to look back at "tue" and when it has found three times, it knows to stop and not consider any other Tuesdays it may find further back in the data?
I'm trying to count the number of times a pupil gets a detention which has been rescheduled.
In the main worksheet below I want to be able to count instances like the one on row 11 where John Smith has had a rescheduled detention.
I want to be able to connect this rescheduled detention to John Smith on a different worksheet in the same workbook. On the screenshot below I would like to have Column D as a running total of rescheduled detentions.
I have tried all sorts of permutations of the COUNTIF function but without success.
I'm trying to simply count a range of cells using the countif function. The range is on a different sheet within the same workbook then where the formula is. The formula is
=COUNTIF('Aggregated Results'!L3:L22,"yes"). It returns 0 (zero) for the count which is incorrect as three Yes's appear in the range of cells.