COUNTIF Function Per Month
Mar 12, 2007
I have a table in which we track our daily issues.. A1 - A6
Resource/Subject/Date/Time Of Failure/Escalated/Tech Int
I want to be able to count the amount of escalations we have per month...
We just enter a Y or N for the escalation field.
I'm not great with Excel and can do a count with the COUNTIF but don't know how to separate my results so that the count is done per month..
Can someone point me in the right direction?
*EDIT* Also my date format is as follow's 04-Jan-07. Should I change that to make it easier to calculate the results?
View 9 Replies
ADVERTISEMENT
Apr 4, 2013
I am working in a spreadsheet that contains a bunch of data, it is not limited, and varies. It has some fiels such as: name, date of birth, address, and others. I am interested in creating a column with only the month digit of the date of birth for each row.
I have been working with some code, I am not quite sure how to continue. The following table would be a example that I have of the data, it has only to entry in the column of Date of Birth, but my data range will always vary. I want to get the month and past it in the next cell that is available in this case would be column c or 3... The worksheet name is REP.
VB:
Dim Cell As Range
' 1st cell with the posting date
Set Cell = Range("A2")
Do While Not IsEmpty(Cell)
If Cell = "Date" Then
[Code] .....
View 5 Replies
View Related
May 1, 2006
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
=IF(A1="",A1,IF(MONTH(A1+1)=MONTH(A1),A1+1,""))+ = workday
to fit on the page, I need the dates to be from the 1st to the 15th, and 16th to the 31st. I am not sure how to write this either.
View 11 Replies
View Related
Dec 16, 2013
Below is my function. I use it to count the number of times a value in A9 appears in Sheet2. I would like to edit my function to count the value in A9 that appeared in a given month in U6.(U6 is 12 for decemeber)
=IF(LEN(A9),COUNTIF(Sheet2!A:A,"*"&A9),"")
This is what I thought it would have been but I think I'm wrong because the function is not counting by month.
=IF(LEN(A9),COUNTIF(Sheet2!A:A,"*"&A9),IF(MONTH(Sheet2!D14:D9000)=U6,"")
View 4 Replies
View Related
Jul 27, 2014
How do I 'countif' for a particular month of the year?
I have a long list of dates and need to count how many are in January, february etc.
View 1 Replies
View Related
Dec 1, 2008
I play poker, and I have a live session log in an excel spreadsheet, like so:
View 2 Replies
View Related
Mar 6, 2014
I am a memeber of this forum for more than a year, and currently assign into a new assignment which dealing an excel file everyday. We have one excel file for moniroting of action items generated by the management after the study. As since there were around 2,500+ rows has been generated since in the beginning of 1990's till todate. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this month out of the total numbers of action items.
Is it possible to use the COUNTIF formula to count the number of items in Col C, where Col B contains a date?
2-Jan-13 Closed
2-Jan-13 Closed
5-Jan-13 Closed
19-Feb-13 Closed
16-Feb-13 Closed
22-Feb-13 Closed
2-Mar-14 Closed
5-Mar-14 Closed
8-Mar-14 Closed
10-Mar-14 Closed
15-Mar-14 Closed
View 10 Replies
View Related
Mar 6, 2008
I need a macro to automatically update 50 cells (currently done manually) with the calculation below. The calculation is different in each cell ie a different range is specified but the concept is the same.
COUNTIF(‘SHEET 1’!$A$1:$?$99,”X”)
SHEET 1 remains static
$A$1 remains static for the particular cell - each cell has a different value
$?$ ? moves to next column number each time the macro is run
$?$99 99 remains static - each cell has a different value
“X” remains static - differs from cell to cell
View 13 Replies
View Related
Nov 14, 2011
I am trying to count the number of dates in November - is there a Countif function or Sumproduct function that would return the number of dates in November?
BroadwayCombined
H3411/4/20113511/4/20113611/4/20113711/3/20113811/3/20113911/3/20114011/3/20114111/3/2011
4211/3/20114311/3/20114411/2/20114511/2/20114611/1/20114711/1/20114811/1/20114910/31/2011
5010/31/20115110/31/20115210/31/20115310/31/20115410/31/20115510/31/20115610/28/2011
5710/28/20115810/28/20115910/28/20116010/28/20116110/28/20116210/28/20116310/27/2011
View 6 Replies
View Related
Oct 2, 2005
function in a spreadsheet that will list all of the days in
a given month automaticaly with the entry of the 1st of the month only.
Ex;
10/01/05 entered dated
10/02/05 auto fill
10/03/05 "
. "
. "
10/31/05 end of auto fill
I would like the function to stop filling dates at end of the month even for shorted months such as Feb.
View 10 Replies
View Related
Mar 20, 2014
MS Excel Version : 2010
Attached File name : countif for a given month.xlsx
I want to a sum the given condition xxx / yyy according to the month in yellow cells.
View 6 Replies
View Related
Mar 20, 2014
MS Excel Version : 2010
Attached File name : countif for 2 conditons a given month.xlsx
I want to a count with given 2 conditions AA11 / BB22 and xxx / yyy according to the month in yellow cells.
View 2 Replies
View Related
Oct 29, 2008
i have a list of employess who i need to count each month. i need a way i can say count if >0 for month = Oct. each employee has a summary of there work for a month in a list going down.
example
___John
Jan__0
Feb__19
Mar__50
___Bob
Jan__4
Feb__56
Mar__12
Right now i have a way i am summing up the total work for all the employees
"=SUMPRODUCT(B21:B512,--(A21:A512=A4))" <------'A4=Jan in the formula'
How could i change this to reflect count the employees and not sum the total? The idea is a need to know how many employees had a number greater then 0 for the month of Oct.
View 2 Replies
View Related
Jan 20, 2010
I want to use a COUNTIF to return the sum of all the dates that fall within a given month/year. For example: E1 Contains the date July-2009
Column A has date entries such as July 3, 2009, July 18, 2009, August 4 2009. In F1 I want to return the sum of all dates that fall within the month of E1.
View 4 Replies
View Related
Jan 3, 2012
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
View 9 Replies
View Related
May 14, 2014
important columns are: "D", "G", "L".
this is about a project is a granite to be installed in 104 units, these units are divided in 4 types (column "L") K1, K2, K3, K4
I tried IF, SUMIF, COUNTIF, ETC but I think that I need is some combined function that I'm not able to figure out.
as you can see in the attached file, my units 101, 102, etc is not been installed yet (column H is empty), but the units 209, 210, 211, 214 yes was installed on 5/6 for example.
for example, if i use =COUNTIF(H4:H20,">0"), will return me all the H that is not empty (=3), how many kitchen was installed so far, but, I would like to know how many of these returned units (3), is my different types: K1, K2, K3 and K4....
View 5 Replies
View Related
Sep 1, 2008
I am trying to count values in cells of column A only if there is something (any value) in corresponding cells in columns B, C, D, and E. If there are no values in cells of columns B, C, D, and E do not count the cell in column A.
View 10 Replies
View Related
Jan 29, 2007
I'm trying to do a count where column C="Employee" & column E="2008". Below is the formula I have tried and is obviously not working.
=countif(and(C113:C143="Employee",E113:E143="2008")
View 9 Replies
View Related
Feb 15, 2007
I'm trying to use the worksheet function countif in my code and it does not recognize it. But it does recognize counta. Here's a sample of my code.
Private Sub UserForm_Activate()
Dim MyUnion As Range
Set MyUnion = Union(Rows(12), Rows(14), Rows(16), Rows(18), Rows(20), Rows(22), _
Rows(29), Rows(31), Rows(33), Rows(35), Rows(37), Rows(39), _
Rows(46), Rows(48), Rows(50), Rows(52), Rows(54), Rows(56), _
Rows(63), Rows(65), Rows(67), Rows(69), Rows(71), Rows(73))
txtTtlDays.Text = Application.worksheetfunction.countif(MyUnion, "&A")
End Sub
View 4 Replies
View Related
Feb 26, 2014
I'm trying to create a formula to return the number of cells where the last 8 characters of a cell end with the string "landline"
My (failed) attempt at creating this is as follows:
=COUNTIF RIGHT(A2:A322,8)="Landline"
View 8 Replies
View Related
May 2, 2014
I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
View 8 Replies
View Related
May 19, 2014
Is it possible to use a variable in Countif?
See attached sheet. When a number repeats for the 3rd time, I need to reset the
Countif function.
For example;
Countif($A$5:A20,A20).
I need to change the $A$5 to the current row number so we can start the count again. I need to do this several times during the sheet.
We are counting numbers until they repeat for a 3rd time and then we start the count again at that point.
View 1 Replies
View Related
Mar 9, 2009
I am trying to count number of staff working in any day without deleting the empty cells.(see attached sample sheet). I tried sumproduct as I have two criteria but it is giving me a "zero" result. I only want to count cells in range B3:B32 that does not have "#" sign if there is a staff name if there is a staff name id corresponding cell in Column A within A3:A32.
View 3 Replies
View Related
Jun 5, 2008
I am using the following COUNTIF formula which I am sure is supposed to prevent '#N/A' from appearing (According to [url]
View 12 Replies
View Related
Nov 5, 2011
I am trying to return how many cells contain a string of text as entered by the user but I am struggling to put wildcards around my search term. Below is the code I have so far.
Code:
Dim search as String
Dim occurance As Integer
search = InputBox("Search for", "Search Term")
occurance = WorksheetFunction.CountIf(Cells, search)
MsgBox (occurance)
View 2 Replies
View Related
Dec 19, 2012
How do I setup a COUNTIF function so that it 'searches/uses' more than one column for results.
Example: I have a spreadsheet with 20 columns - starting at A1 to T1 - and ending at A100 toT100. I want to use the COUNTIF function to 'search' all of these from A1/T1 to A100/T100 and tell me how many times the number 21 appears across that range of cells.
This COUNTIF function will reference data on a sheet called 50 - so at the moment my current single colum COUNTIF looks like this -=COUNTIF('50'!A1:A100,21) - and it works fine for one colum, but I need to search 20 columns.
View 4 Replies
View Related
Aug 16, 2007
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
and so on down the cells.
View 9 Replies
View Related
Jul 3, 2008
Look at 6 weeks of data, using "Tue" as the search parameter. I need to find the last 3 tuesdays (from current cell) and then sum the corresponding values in the cell I designate.
I'm fluent with LOOKUP and already have it finding and summing last few Tuesdays and corresponding sales totals, but I need it to only back THREE Tuesdays consistently, not 2 or 4, which it is sometimes doing now??? How do I force it to look back at "tue" and when it has found three times, it knows to stop and not consider any other Tuesdays it may find further back in the data?
View 9 Replies
View Related
Apr 23, 2006
I'm trying to count the number of times a pupil gets a detention which has been rescheduled.
In the main worksheet below I want to be able to count instances like the one on row 11 where John Smith has had a rescheduled detention.
I want to be able to connect this rescheduled detention to John Smith on a different worksheet in the same workbook. On the screenshot below I would like to have Column D as a running total of rescheduled detentions.
I have tried all sorts of permutations of the COUNTIF function but without success.
View 5 Replies
View Related
May 24, 2007
I'm trying to simply count a range of cells using the countif function. The range is on a different sheet within the same workbook then where the formula is. The formula is
=COUNTIF('Aggregated Results'!L3:L22,"yes"). It returns 0 (zero) for the count which is incorrect as three Yes's appear in the range of cells.
View 4 Replies
View Related