I'm trying to create a formula to return the number of cells where the last 8 characters of a cell end with the string "landline"
My (failed) attempt at creating this is as follows:
=COUNTIF RIGHT(A2:A322,8)="Landline"
I'm currently working on a spreadsheet (see attached) which will have both numeric and text string data. This will be sorted by calender month and linked to another spreadsheet.
Could someone please list 2 functions for me.
The 1st would allow act like a filter allowing only data to be counted for a selected month from a drop down list.
The 2nd allows a counting of pre-set (drop down list) text strings to be counted.
Sorry seems a bit complicated and really I should have either a created a pivot report or used access but I'd like to continue with Excel for this exercise.
I'm trying to run a countif formula in a separate worksheet searching for a long text string. The text string is long enough that I can't copy the entire string into the Ctrl F Find function.
=COUNTIF('Data Month 1'!C:C,F4)
F4 = text string put together using the values of multiple adjascent cells. Total characters are over 26.
I'm trying to enter text (a staff members initials) into an Input Box so that the initials are then used as the citeria in a CountIF formula entered by VBA
A simplified version of the code I am using is:
Dim staffname As String
staffname = InputBox(Prompt:="You name please.", _
Title:="ENTER INITIALS", Default:="MC")
Range("H9").FormulaR1C1 = "=COUNTIF(RC[-3]:RC[-1],"" & staffname & "")"
The issue is getting the staffname string to be entered within the formula.
What is the correct combination of "" & to enable this to work?
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
important columns are: "D", "G", "L".
this is about a project is a granite to be installed in 104 units, these units are divided in 4 types (column "L") K1, K2, K3, K4
I tried IF, SUMIF, COUNTIF, ETC but I think that I need is some combined function that I'm not able to figure out.
as you can see in the attached file, my units 101, 102, etc is not been installed yet (column H is empty), but the units 209, 210, 211, 214 yes was installed on 5/6 for example.
for example, if i use =COUNTIF(H4:H20,">0"), will return me all the H that is not empty (=3), how many kitchen was installed so far, but, I would like to know how many of these returned units (3), is my different types: K1, K2, K3 and K4....
I am trying to count values in cells of column A only if there is something (any value) in corresponding cells in columns B, C, D, and E. If there are no values in cells of columns B, C, D, and E do not count the cell in column A.
View 10 Replies View RelatedI'm trying to do a count where column C="Employee" & column E="2008". Below is the formula I have tried and is obviously not working.
=countif(and(C113:C143="Employee",E113:E143="2008")
I'm trying to use the worksheet function countif in my code and it does not recognize it. But it does recognize counta. Here's a sample of my code.
Private Sub UserForm_Activate()
Dim MyUnion As Range
Set MyUnion = Union(Rows(12), Rows(14), Rows(16), Rows(18), Rows(20), Rows(22), _
Rows(29), Rows(31), Rows(33), Rows(35), Rows(37), Rows(39), _
Rows(46), Rows(48), Rows(50), Rows(52), Rows(54), Rows(56), _
Rows(63), Rows(65), Rows(67), Rows(69), Rows(71), Rows(73))
txtTtlDays.Text = Application.worksheetfunction.countif(MyUnion, "&A")
End Sub
I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
Is it possible to use a variable in Countif?
See attached sheet. When a number repeats for the 3rd time, I need to reset the
Countif function.
For example;
Countif($A$5:A20,A20).
I need to change the $A$5 to the current row number so we can start the count again. I need to do this several times during the sheet.
We are counting numbers until they repeat for a 3rd time and then we start the count again at that point.
I am trying to count number of staff working in any day without deleting the empty cells.(see attached sample sheet). I tried sumproduct as I have two criteria but it is giving me a "zero" result. I only want to count cells in range B3:B32 that does not have "#" sign if there is a staff name if there is a staff name id corresponding cell in Column A within A3:A32.
View 3 Replies View RelatedI have a table in which we track our daily issues.. A1 - A6
Resource/Subject/Date/Time Of Failure/Escalated/Tech Int
I want to be able to count the amount of escalations we have per month...
We just enter a Y or N for the escalation field.
I'm not great with Excel and can do a count with the COUNTIF but don't know how to separate my results so that the count is done per month..
Can someone point me in the right direction?
*EDIT* Also my date format is as follow's 04-Jan-07. Should I change that to make it easier to calculate the results?
I am using the following COUNTIF formula which I am sure is supposed to prevent '#N/A' from appearing (According to [url]
View 12 Replies View RelatedI am trying to return how many cells contain a string of text as entered by the user but I am struggling to put wildcards around my search term. Below is the code I have so far.
Code:
Dim search as String
Dim occurance As Integer
search = InputBox("Search for", "Search Term")
occurance = WorksheetFunction.CountIf(Cells, search)
MsgBox (occurance)
How do I setup a COUNTIF function so that it 'searches/uses' more than one column for results.
Example: I have a spreadsheet with 20 columns - starting at A1 to T1 - and ending at A100 toT100. I want to use the COUNTIF function to 'search' all of these from A1/T1 to A100/T100 and tell me how many times the number 21 appears across that range of cells.
This COUNTIF function will reference data on a sheet called 50 - so at the moment my current single colum COUNTIF looks like this -=COUNTIF('50'!A1:A100,21) - and it works fine for one colum, but I need to search 20 columns.
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
and so on down the cells.
Look at 6 weeks of data, using "Tue" as the search parameter. I need to find the last 3 tuesdays (from current cell) and then sum the corresponding values in the cell I designate.
I'm fluent with LOOKUP and already have it finding and summing last few Tuesdays and corresponding sales totals, but I need it to only back THREE Tuesdays consistently, not 2 or 4, which it is sometimes doing now??? How do I force it to look back at "tue" and when it has found three times, it knows to stop and not consider any other Tuesdays it may find further back in the data?
I'm trying to count the number of times a pupil gets a detention which has been rescheduled.
In the main worksheet below I want to be able to count instances like the one on row 11 where John Smith has had a rescheduled detention.
I want to be able to connect this rescheduled detention to John Smith on a different worksheet in the same workbook. On the screenshot below I would like to have Column D as a running total of rescheduled detentions.
I have tried all sorts of permutations of the COUNTIF function but without success.
I'm trying to simply count a range of cells using the countif function. The range is on a different sheet within the same workbook then where the formula is. The formula is
=COUNTIF('Aggregated Results'!L3:L22,"yes"). It returns 0 (zero) for the count which is incorrect as three Yes's appear in the range of cells.
look at the attached file. How can I have the text values in Column A automatically be underlined if the concerning value in Column C drops below the value "1"? Note that Column C wont give you number values in this sample book as it refers to another file on my hd.
View 4 Replies View RelatedI have a range of numbers between 1 and 25 in 50 cells.
How could I use the countif function to look at that range of numbers for
values between 5 and 10 and count those values that meet the criteria of
between 5 and 10?
Or if there is another function to use, let me know.
I am trying to use countif to count the number of times a unique items occurs in multiple worksheets.
For example, I want to count number of times "ITEM1" occurs in row 1 of sheets1, sheets2, sheets3, sheet4, etc. It may look like this:
Sheet1 = 4 entries
Sheet2 = 22 entries
Sheet3 = 5 entries
Sheet4 = 10 entries
So the entire count would be 41 total.
I need to write a formula in F35 that looks at C4 and if that cell has a # of 25 or greater it will then look at F4 and if that # is greater or equal to 95% it will return a count of 1 in F35. I know how to use the countif function but am stumped when I try to add in the function to look at c4 as a qualifier.
View 7 Replies View Relatedcreate a formula using the COUNTIF function? I have a number in cell C1 and then numbers from C3:C65. I would like to produce a number count of how many items from c3:c65 are less than the value in c1 which is 24.
View 6 Replies View RelatedCan I use the "countif" function using a group of sheets as the range and the criteria on a separate sheet or manually typed in?
I have tried and continue to get the #VALUE error.
OR
Can I do the same thing and perform the "countif" function by using a specific value as the way to count?
I need to count rows that meet 2 criteria.
I have seen this help page
http://www.ozgrid.com/Excel/count-if.htm
but that counts rows with "criteria 1" OR "criteria 2"...
I need to count rows that fulfill "criteria 1" AND "criteria 2"
ie - count the rows that have todays date AND a cell that says "COMPLETE"
ideally it would be as easy as "=countif(A:F,"today()","COMPLETE") but that doesn't work... any way around this???
I am trying to create a shift roster for my team. My team work in general shift (GS), second shift (SS), third shift (TS). There are situations where some team members come in any of these shift but had to leave midway due to feeling well, so that should be counted as half day. This half day scenario may be in any case GS/SS/TS. I am using COUNTIF to get the sum of GS/SS/TS for each employee which is giving a whole number. I also want to incorporate 3 different variations of half day as Half Day GS (HG), Half Day SS (HS), Half Day TS (HT). My expectation is that for each Half Day only 0.5 should be added in a appropriate shift, but COUNTIF is always counting this as 1. How I can achieve this using countif or any other Excel function? Sample sheet is attached.
View 3 Replies View RelatedI am attempting to create a capital depreciation schedule that gives us our total operating impact for a given calendar year. I can populate my depreciation based on the purchase month, and fill across the schedule the monthly depreciation cost, however, I'm not sure how to stop the depreciation after the item has depreciated fully (say after 36 months).
For example, if someone were to select March 2013 in B5, monthly depreciation should begin in E5 and spread across ONLY 36 months. If they were to select April 2013, the depreciation would begin in F5 and extend ONLY 36 months.
I think it might be possible to do this with an COUNTIF function, but it is not working for me.
I'm trying to write a macro to test whether a cell has any neighbouring cells that match it's value.
I'd like this to be cumulative so that the more matches, the higher the value.
I'd then like the result to be written in another cell to set up a separate grid.
So far I'm getting error messages and I don't know why: