I have a data validation in cell A1 = 2,3,4,5
A2, A3, A4, A5, A6 is empty.
What i want to be able to do is,
when cell A1=2 (A2 & A3 wilL appear the value "1")
when cell A1=3 (A2, A3, A4 will appear the value "1")
when cell A1=4 (A2, A3, A4, A5 will appear the value "1")
when cell A1=5 (A2, A3, A4, A5, A6, will appear the value "1")
I have a excel spread with a range of A1:H64. The spreadsheet is designed for the user to enter information into the appropriate cells, i.e. user ID in cell D4; name in cell D5; and date in cell F5. My question is instead of the user scrolling around and finding the cells that require input is there a way to set the spreadsheet where the user tabs and/or uses the enter key to move around and go only to the cells that require input and not to the ones that are locked and protected?
View 9 Replies View RelatedI have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I really appreciate help from the excel gurus and expert here on my little problem. I'm rarely using excel and have a very little knowledge on VBA programming.In short, I've been requested to develop a shift schedule for my department that can automate the shift staff schedule on the monthly basis.
I've created two worksheet of which the first worksheet is represent as master data list (INPUT Worksheet) that contain with formulas. While the other worksheet is the automated shift data (REPORT Worksheet) that linked from the master data list (INPUT Worksheet).
Attached herewith is a sample of my work. As you can see,I wanted to copy comments from the input worksheets (on DUTY column) so that it will then automatically appears or updated in the shift schedule. Whenever the dropdown selection change, the data will change accordingly. On the REPORT worksheet, each cells, range D14:AH38 are referring to DUTY column month by month. I'm able to link it but it fails to copy over the comments as well. I believe that macro can resolve this, can someone help me on this?
I read in a book that if you enter a formula in a cell, like cell A1 contains
=rand() for instance, that if you select Go on the menu tab, and then enter the final destination cell or range (ex: A1,A200), then hit ctrl+Enter simultaneously, it will fill the formula down to that cell. I can get it to select the range, by hitting Shift+Enter, but not copy down the formula using Ctrl+Enter, or Ctrl+Shift+Enter. I am using excel 03, XP. It only returns blank values for the range.
I am trying to do is have a VBA automatically fill a blank cell with text of a different color.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("B8") = """" Then
Range("B8") = "Name"
End If
End Sub
Is what I've been trying to get to work. If the value in B8 is suddenly deleted, I want that cell to show "First Name", in a lighter grey. I know I can get the color of the text by using the conditional formatting, but how do I get that cell to auto-fill when deleted?
What am I missing here. The following code fragment
strTestString = In_Wrksht.Range("A" & i)
strNameString = Trim(Mid(strTestString, 6))
Debug.Print strTestString & " uuu"
Debug.Print strNameString & " eee"
In_Wrksht.Range("B" & i) = strNameString & " XXX"
Debug.Print Trim(In_Wrksht.Range("B" & i)) & "ggg"
returns these results:
7/ 31 FIDELITY SHORT TERM BOND uuu
FIDELITY SHORT TERM BOND eee
ggg.
strNameString is not being assigned to B&i. Why Not?
I have a command button set up to gather information, then create a new sheet, and paste a copied button from another location to the new sheet. The command button that shows up on the new sheet is offset and not centered in the cell. It is centered in the cell where it comes from and the cells are the same size.
I noticed that if I copy a command button and simply paste it to a new sheet, it is offset just like this. I need it to not do this. If I have to make it write in a new command button and assign a macro to it, that is fine. I went with the copy/paste option to save time.
[Code] .....
Now, before it becomes an issue, this is only a part of the full code, but it is running in it's own conditional loop. The other part works fine. And I tried changing the alignment in the cell to see if that was the issue. It was not.
Copied command buttons are offset in the cells they are pasted to.
I use Excel 10 and i'm on Window 7.
I need a formula to transfer the values in on cell to another designated cell. "AM" should be in the cell under "AM and "PM" should be under the cell marked "PM". If there's nothing in the space where AM or PM is, that should be blank.
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
As what it says in the subject.
I tried writing this in sheet1 A1:
=text('sheet2'!E24, "@")
It appears the value as in E24 but i cannot format cell the value to accounting and put the demical value to 2.
it still appears like this:
2345.54332
Is there anything other than TEXT function
Problem with the attached Range Overrun.xlsm.
Form opens with set number of rows. End User then enters figure into C3 of how many row are to be added.
VB:
Option Explicit
Dim c As Range
Dim j As Integer
[Code]....
Macro works correctly by adding the number of rows listed in C3. It SHOULD then "name " various cells in the original and new rows.
BUT the Macro goes ON to name cells in rows BELOW the ones that are added.
So on the attached worksheet the original rows were 6 - 9. Rows 10 - 12 were added, but the macro names the cells from Rows 6 - 14.
I have several separate Excel files that are all formatted in the same way.
I want all this data, excluding the header rows, from those separate Excel files, to appear in a new/designated Excel file. - I don't want to keep copying and pasting.
I also want the data, once extracted/copied/exported, to be formatted according the formatting style on the designated Excel file.
Is it possible to protect an excel file such that it will open up only on designated computers (identified by the computer name or some unique hardware identification like MAC address etc)?I was wondering if the VB editor can be used to do the same.
Let me put my requirement in detail:
I have an excel file "123" created in one computer (named=A). On this computer this file can be opened by anyone.I write a code such a way that, this particular file when copied on to other computers say (B,C & D) would open up as usual. But on computer E or any other computer, it should not open.
I cannot use password protect feature on the file as "n" number of users will be accessing this file on those designated computers. I was finding few of the clients copying the files on their personal drives or email without proper consent.If its possible, I would like to employ the same on few of my word (.doc) files as well.
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx‎
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
input:
blank 3-x Blank 1-y blank 2-z 1-k
output:
1-k 1-x 2-z 3-y
i have just read the thread started by scabertrain regarding "if" conditonal formating, but mines slightly different and i cant make head nor tale of the fomula shown.
So... Monthly budgeting... using a projected outgoing (A1) and an actual outgoing (A2) i want the colour "A2" to change depending on whether i have spent over the budgeted amount, green being underspent, orange for on target and red for over spending....
Example:
I predicted (A1) that i was going to spend £50 on a night out, but my actual spending (A2) was £100, i would like A2 to turn to red.
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedExcel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
Cell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
I'm working on a spreadsheet that includes items I sell as well as the packaging it goes in.
The formula I'm looking for basically will tell a cell that if one cell (# of box) is equal a certain # it will add two separate cells by the weight of the box.
I have cells for each of the following: Weight in lb and weight in oz of the item (no box), a cell which holds the number of the box (ranging from 1-15) and two cells with weight in lb and weight in oz which would be the total weight of the item + box.
So, for example, if weight of item equals 1 and box cell equals 2 then it will put the weight of item + weight of box into a third cell.
Here's a picture of my current spreadsheet : [URL] .....
Basically, I would like to do something such as if P3 = 5, then Q3 will equal N3 + U6 and R3 will equal O3 + V6.
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I want to find the cells 30 past the reference cell and the corresponding value:
i.e. =Sheet1!D312 to =Sheet1!D342 (=Sheet1!D(312+30))
or
=Sheet1!D312 to =Sheet1!E312
is there a way to automate this without having to manually edit each formula?
I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.