As what it says in the subject.
I tried writing this in sheet1 A1:
=text('sheet2'!E24, "@")
It appears the value as in E24 but i cannot format cell the value to accounting and put the demical value to 2.
it still appears like this:
2345.54332
Is there anything other than TEXT function
I use Excel 10 and i'm on Window 7.
I need a formula to transfer the values in on cell to another designated cell. "AM" should be in the cell under "AM and "PM" should be under the cell marked "PM". If there's nothing in the space where AM or PM is, that should be blank.
I have a data validation in cell A1 = 2,3,4,5
A2, A3, A4, A5, A6 is empty.
What i want to be able to do is,
when cell A1=2 (A2 & A3 wilL appear the value "1")
when cell A1=3 (A2, A3, A4 will appear the value "1")
when cell A1=4 (A2, A3, A4, A5 will appear the value "1")
when cell A1=5 (A2, A3, A4, A5, A6, will appear the value "1")
I read in a book that if you enter a formula in a cell, like cell A1 contains
=rand() for instance, that if you select Go on the menu tab, and then enter the final destination cell or range (ex: A1,A200), then hit ctrl+Enter simultaneously, it will fill the formula down to that cell. I can get it to select the range, by hitting Shift+Enter, but not copy down the formula using Ctrl+Enter, or Ctrl+Shift+Enter. I am using excel 03, XP. It only returns blank values for the range.
I am trying to do is have a VBA automatically fill a blank cell with text of a different color.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("B8") = """" Then
Range("B8") = "Name"
End If
End Sub
Is what I've been trying to get to work. If the value in B8 is suddenly deleted, I want that cell to show "First Name", in a lighter grey. I know I can get the color of the text by using the conditional formatting, but how do I get that cell to auto-fill when deleted?
What am I missing here. The following code fragment
strTestString = In_Wrksht.Range("A" & i)
strNameString = Trim(Mid(strTestString, 6))
Debug.Print strTestString & " uuu"
Debug.Print strNameString & " eee"
In_Wrksht.Range("B" & i) = strNameString & " XXX"
Debug.Print Trim(In_Wrksht.Range("B" & i)) & "ggg"
returns these results:
7/ 31 FIDELITY SHORT TERM BOND uuu
FIDELITY SHORT TERM BOND eee
ggg.
strNameString is not being assigned to B&i. Why Not?
I have a command button set up to gather information, then create a new sheet, and paste a copied button from another location to the new sheet. The command button that shows up on the new sheet is offset and not centered in the cell. It is centered in the cell where it comes from and the cells are the same size.
I noticed that if I copy a command button and simply paste it to a new sheet, it is offset just like this. I need it to not do this. If I have to make it write in a new command button and assign a macro to it, that is fine. I went with the copy/paste option to save time.
[Code] .....
Now, before it becomes an issue, this is only a part of the full code, but it is running in it's own conditional loop. The other part works fine. And I tried changing the alignment in the cell to see if that was the issue. It was not.
Copied command buttons are offset in the cells they are pasted to.
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
In Sheet2 I have a list of cell addresses showing values such as D5, D32, D59, D221, D869 stored in cells AB7:AB16. In Sheet1 the "D" column holds dates. I want to return the corresponding date for each D# cell into Sheet2 in column AC7:AC16. I'm unaware of the proper syntax for this. I though it would look something like:
='Sheet1'!('Sheet2'!(AB7))
however that doesn't work.
I have a excel spread with a range of A1:H64. The spreadsheet is designed for the user to enter information into the appropriate cells, i.e. user ID in cell D4; name in cell D5; and date in cell F5. My question is instead of the user scrolling around and finding the cells that require input is there a way to set the spreadsheet where the user tabs and/or uses the enter key to move around and go only to the cells that require input and not to the ones that are locked and protected?
View 9 Replies View RelatedI want to auto populate a call with the value of a different cell that has been colored on a different page.
Example:
1.) On Sheet 1, Cells range A1-A10 have values to choose from
2.) I choose A7 and change the cell color to gray
3.) It auto populates Cell B1 on Sheet 2 with the value of the gray colored cell I selected on Sheet 1
How can this be done?
E.g. say I want to create a list of cells each referencing to the first, second, third sheet, and so on.
Say, on one sheet cell A1 references to the second sheet's A1, cell A2 references to the third sheet's A1, and so on.
Ideally I'd love to be able to write something like
=Worksheet(1)!A1
=Worksheet(2)!A1
=Worksheet(3)!A1
and so on.
The problem is:
I Sheet 1 cell I33 is updated weekly. It would then be great with a macro that could copy from I33 in Sheet 1, into C5 in Sheet 2. But if C5 is filled, it should paste into D5, and so on.
This function =INDIRECT(""&A17&"!"&$A$8) works only once or twice. Then I rewrite it as =INDIRECT(""&A17&"!"&A8), without the dollar sign, $, at A8. But then that only works once or twice.
This is how it works: In Grid A17, type name of worksheet in which to perform the data search. Then, the function goes to that worksheet and selects the data in Grid A8.
Problem with the attached Range Overrun.xlsm.
Form opens with set number of rows. End User then enters figure into C3 of how many row are to be added.
VB:
Option Explicit
Dim c As Range
Dim j As Integer
[Code]....
Macro works correctly by adding the number of rows listed in C3. It SHOULD then "name " various cells in the original and new rows.
BUT the Macro goes ON to name cells in rows BELOW the ones that are added.
So on the attached worksheet the original rows were 6 - 9. Rows 10 - 12 were added, but the macro names the cells from Rows 6 - 14.
I have several separate Excel files that are all formatted in the same way.
I want all this data, excluding the header rows, from those separate Excel files, to appear in a new/designated Excel file. - I don't want to keep copying and pasting.
I also want the data, once extracted/copied/exported, to be formatted according the formatting style on the designated Excel file.
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
Is it possible to protect an excel file such that it will open up only on designated computers (identified by the computer name or some unique hardware identification like MAC address etc)?I was wondering if the VB editor can be used to do the same.
Let me put my requirement in detail:
I have an excel file "123" created in one computer (named=A). On this computer this file can be opened by anyone.I write a code such a way that, this particular file when copied on to other computers say (B,C & D) would open up as usual. But on computer E or any other computer, it should not open.
I cannot use password protect feature on the file as "n" number of users will be accessing this file on those designated computers. I was finding few of the clients copying the files on their personal drives or email without proper consent.If its possible, I would like to employ the same on few of my word (.doc) files as well.
I really appreciate help from the excel gurus and expert here on my little problem. I'm rarely using excel and have a very little knowledge on VBA programming.In short, I've been requested to develop a shift schedule for my department that can automate the shift staff schedule on the monthly basis.
I've created two worksheet of which the first worksheet is represent as master data list (INPUT Worksheet) that contain with formulas. While the other worksheet is the automated shift data (REPORT Worksheet) that linked from the master data list (INPUT Worksheet).
Attached herewith is a sample of my work. As you can see,I wanted to copy comments from the input worksheets (on DUTY column) so that it will then automatically appears or updated in the shift schedule. Whenever the dropdown selection change, the data will change accordingly. On the REPORT worksheet, each cells, range D14:AH38 are referring to DUTY column month by month. I'm able to link it but it fails to copy over the comments as well. I believe that macro can resolve this, can someone help me on this?
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I am trying to create conditional formating of a cell based on the value of another cell whish is linked to another sheet. I an using the "The formula is =$AA$30=1" where the cell AA30 is the cell linked to the other sheet. the problem is I have to do thiss for approx 200 cells ie =$AA$30=1, =$AB$30=1, =$AA$31=1, =$AB$31=1 --- =$AZ$42=1. Do I have to enter the formulea for each cell or is there a way to automate this?
View 2 Replies View RelatedI am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("d34").Value < 0 Then
Me.Tab.ColorIndex = 3
ElseIf Range("D34").Value > 0 Then
Me.Tab.ColorIndex = 4
Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngX As Range
Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart)
' the C2 is the reference the title that would be on the index
If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
View 10 Replies View RelatedI have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I used this vba code before:
[Code] ......
And it worked perfectly, but now i wanted to use it in an other file but just change the sheets and I keep getting an Error 13.
It should copy the data from sheet insertmeasurements c23 till end of data in the column next to it (is dynamic) and based on cell B1 and the matching category code in column B, put that data in the matching cell in column C to the matching cell (based on the criteria in column B and C) on the sheet storedata.
Attached File : Profitibility Database v1.4.xlsm