I want to lookup some data and bring back the info in the last populated cell on the row, rather than column 4. I have written the below but it is bring back info from Column Index number 4.
=VLOOKUP(D4,'A2'!A:Z,4, FALSE)
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
I need a formula to check a range of parts and bring back a value of 0 if matched or the value in another cell if it doesn't match.
Part number H-200-3
Part number H-200-3-A
Part number H-200-3-B
If I enter any of the above part numbers then cell B1 returns 0 if it is a different part number then B1 would need to match cell A1.
=MIN(IF(B3:B32="",IF(A3:A32>0,A3:A32))) ArrayedOldest Date Array.xlsx
Following on from a previous post need to add to my (forums) array.
I need to find the location of a date which has been looked up in a cell based on the above formula which is in the attached.
create an array of active printers. I edited the code to write the array to a range, then populate a data validation list with the printer names. All works great. The goal was to select a printer name from the list and run a macro to print some sheets. However, the function doesn't bring back enough of the name to do this. how to edit the function to bring back the whole name.
For example: after running the function the 1st printer returned ="\rizzoHQ-ENG-04"...when i record a macro to print to this printer it needs ""\rizzoHQ-ENG-04 on Ne05:". Here is the function unedited, I bolded the part i think is controlling the name:
Name Qtr Year
Org 112007
Org 222006
Org 332006
Org 442006
Org 542007
Org 612006
I want the code to say, If Qtr = 1 And Year = 2007, then bring back Org Name, If Qtr = 2 And Year = 2006, then bring back Org Name and so forth.
The code should loop through a range of constant data (Region Name), until the Region Name is blank.
Dim OrgCell As Range
Dim OrgTargetCell As Range
Dim RegionCell As Range
Set OrgCell = Sheets("DATA Removed").Range("A2")
Set OrgTargetCell = Sheets("Overdue").Range("A3")
Set RegionCell = Sheets("DATA Removed").Range("C2")
i = 0
OrgCell.FormulaR1C1 = _
"=IF(AND('DATA Removed'!R[-1]C[11]=1,'DATA Removed'!R[-1]C[12]=2007),'DATA Removed'!R[-1]C,0)"
Do
OrgTargetCell.Offset(i, 0).Value = OrgCell.Offset(i, 0).Value
i = i + 1
Loop Until RegionCell.Offset(i, 0).Value = ""
End Sub
I have a dataset which is dumped into my model every month. The Report tab is a "user form" whereby the user can select multiple search criteria. The dataset is then filtered according to the search criteria entered by the user.
Problem is, that if the user only selects 1 of 3 search criteria and the other 2 cells are left blank, the filter filters on these blank cells and doesn't retrieve any data. Any ideas how I can overcome this?
Sub PopulateReport()
Application.ScreenUpdating = False
Dim MyFilter1 As String
Dim MyFilter2 As String
Dim MyFilter3 As String
MyFilter1 = CStr(Sheets("Report").Range("C2").Value) ' convert cell value to string
MyFilter2 = CStr(Sheets("Report").Range("C4").Value)
MyFilter3 = CStr(Sheets("Report").Range("C6").Value)
Sheets("Waste").Select
Dim Rw As Long
Dim Rng As Range
Rw = Range("A65536").End(xlUp).Row
Set Rng = Range("A1:W" & Rw)
With Rng
.AutoFilter
.AutoFilter Field:=20, Criteria1:=MyFilter1
.AutoFilter Field:=2, Criteria1:=MyFilter2
.AutoFilter Field:=13, Criteria1:=MyFilter3
End With
how to display my excel worksheet using HTML maker as I've downloaded the software but have no idea how to use it!
Median Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells
Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010
So the median of the range is 2, thus we would want the formulas to bring back P3 and p4
Column 1..............Column 2
P3...........................P4
To set up the problem, I have a folder that contains files that are all named numerically, ex. 08-100, 08-101, etc. Each file is identical in format but contains different data, ex. cell B1 is alway "material weight", cell B2 is always "estimated man hours" and new files are added weekly.
I am trying to set up a master spreadsheet that all I have to do is enter the file name (08-102) in the first column, and the second column will return the data in a specific cell of that file.
i have the following macro which finds instances of a search criteria and brings them back to a results column. what i need is instead of having the word GD: appear before each result i need it once at the begining of the results
LastRow = Sheets("design owb").Cells(Rows.Count, 10).End(xlUp).Row
Application.ScreenUpdating = False
For i = 26 To LastRow
Target = Sheets("design owb").Cells(i, 10)
With Sheets("design")
For J = 2 To 54
For K = 4 To 11
If Target = .Cells(J, K) Then
Sheets("design owb").Cells(i, 11) = Sheets("design owb").Cells(i, 11) + "GD: " & .Cells(J, 15) + " | "
End If
Next K
Next J
End With
Next i
Application.ScreenUpdating = True
I have this spreadsheet that has over 20,000 rows. I was asked to build a search page to will bring back all transactions based on a primary key (account number). Here is a sample:
Account NumberDateComments2343566/2/2009 $ 111.43 3453465/1/2009 $ 89.34 5676552/5/2008 $ 643.23 8078989/3/2008 $1,245.34 12543612/5/2008 $ 56.65 2343562/2/2009 $ 343.54 3482459/9/2008 $ 78.76 9345641/2/2009 $ 356.22 2343565/3/2008 $ 529.66
The idea is to enter an account number like 234356 click a button and bring back:
Account NumberDateComments2343566/2/2009 $ 111.43 2343562/2/2009 $ 343.54 2343565/3/2008 $ 529.66
I got the button part done and using vlookup it brings back the first line. The problem is that it won't bring back all the rows just the first one.
I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
Here is my formula now:
=IF(VLOOKUP(J2&" "&L2,'East Data'!M:AU,2,FALSE),"*",0)
J2 is the customer name
L2 is the week
"East Data" is the spreadsheet with all of the promotions and customers.
to be able to do is have a stock control sheet that tells me how much of 1 item we have in stock which is easy, the hard part comes when this stock is sold as this stock can be sold to a number of different customers e.g.
We have 10,000 X Pens
Customer 1 buys 1,000
Customer 2 buys 6,000
Customer 3 buys 3,000
i need a way of saying that we have 10,000 pens but if we sold 1,000 then we can click a button (macro maybe) and that will automatically see that we have 10,000 for that line and we have only sold 1,000 so we need a line inserting saying that we have 9,000 remaing and so on.... The sheet needs to record who these goes to though, that the reason i was thinking of adding a row
If this doesnt make sense then i am happy to answer your questions?
i can upload an example excel sheet if required if someone can explain how i do this?
I am trying to do an if statement where I ask if the 2009 price is .50 or less away from the 2008 price, bring back "Check" See below:
2008 2009
$23.95 $24.15
Using excel 2007
I have approx 11 files in one folder and one master file with same format. 11 files are split user wise and user inuputting the remarks against the invoice in coloum Y and Z in their respective files. I want macro/forumul to collect all the remarks coloum from all users to master files against the respective invoice no.
user file format :
file name temp-1.xlsx
A B Y Z
USER
INVOICE
Remark
Follow-up Date
[Code]......
Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
I have a worksheet with several columns and 1,000's of rows. I have code that makes all "good cells" grey (color index 15) and all "bad cells" red (color index 3).
I would like to do 2 things...
1. If ANY cell is RED, cut the WHOLE ROW and "insert cut cells" below the header row (even if ALL other cells are grey), then repeat the process up the whole worksheet until ANY row with a red cell is at the top.
2. Create a new worksheet named "Trouble Cells", copy the header row along with any rows with red cells.
I would like to keep the formatting the same (for example, the title row is always yellow and is "28" high and all other rows are a height of "12").
I would also like to keep the column width of each column in the new worksheet as well.
Excel 2002
ATTACHMENT: Order Form.xlsx
I am creating an Order form for my job in Excel. On this form, it displays the Top 100 items for sale. All the basic functionality of the form is working fine, my real issue is with the order summary tab.
On this tab, I would like for any Items with a Quantity on the first Sheet to transfer to a summary on the Second sheet.
So far, I am able to get the data onto the second spreadsheet. My final question is, can make the items on the summary sheet go to the top available row? Basically if I have items in row 3, row 7 and row 9 - I would like for the items to automatically fill in rows 3,4,5 respectively. (on the second worksheet)
I have seen people make this happen (on this board even) but for some reason, when I try using those formulas I do not get the results I need. I have attached the file to this post.
On the Tab entitled "Adv Piano" this the product list. On that tab, customers can put a Quantity in column G for the items they want to order and that item's details, price, and quantity will automatically appear on the 2nd tab, "Order Details" in columns I - L in the corresponding row (this is already done)
I need the information in the columns I - L on the "Order Details" sheet to appear in columns C - G on the same sheet, in the same order but to fill in towards the top with the corresponding quantities, item details and price remaining in the same row.
Order Form.xlsx
I'd like to bring data from Sheet2 to Sheet1. If value at Sheet1 f2=5 it should copy from sheet2 b5:k5 tosheet1 a2:j2 If value at Sheet1 f2=10 it should copy from sheet2 b10:k10 tosheet1 a2:j2 etc.
View 3 Replies View RelatedI have a spread sheet that has rows of information and once you click on the tally form button (top Left) you can search on the info and it will display in the list box once you click on a result. I have attached the spread sheet, with only 1 row as obviously I dont want to share work data on here.
My question is that, if I want to display a row in the form, I would like to be able to click on a certain cell (Incident # column), it would then recognise the row and display that row in the form.
At the moment I have a EVENT that will highlight a row if a cell is selected. Just thought I'd mention that in case it would interfere.
VB:
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
' If more than 1 cell is selected, then don't run the rest of the code
Application.ScreenUpdating = False
[Code] ......
ozgrid.xlsm
I'm in the leadup to my A2 ICT controlled conditions piece where i have to make an Excel system. My chosen subject for this is to use the school house points system. I'm going to make a system where the results of house matches are inputted and points are awarded accordingly.
I just have a couple of queries after looking at my initial designs.
1. Is it possible to get excel to look through a sheet, find a text reference, then bring up something in a cell located in the same row? For example, for it to locate one of the House team names, then go along the row and find the ammount of house points they have in order to make a total for them. Is this also possible over a number of sheets? (In order to keep a running total on a separate sheet).
E.G. House, Games Played, Wins, Losses, Draws, House Points
2. For the house cross country event they use a different system which differs from everything i have designed. What i basically need to do is be able to use a drop down against each finishing position where you can select one of the four house teams, then it takes the points won for that finishing position and puts them into a table.
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
I have used the following =IF(ISBLANK(Q6),"",(NOW())) & =IF(ISBLANK(Q6),"",(Today())),
but when the excel file is closed and opened the date changes to now or today. How can I make the date stay and not change?
how to hide a value on a cell when another cell is not yet populated?
like for example:
A1 is Blank A2 has a formula of workday(A1,2) a date will appear on the A2 cell and I want not to show or be hidden the date in A2 until A1 is populated
I am now looking for a command that will return if a cell is populated. I.e. I need something that will find out which cell is the last one populated in a column (populated = contains data) and then will move 2 cells down, and then will enter some data into the following cells.
View 4 Replies View RelatedI am trying to get a cell to become a hyperlink after it has been populated.
For Example:
If cell H42 of Sheet 1 = [ X ] Then create a hyperlink to cell B2 of sheet 2.
I have been trying quite a few different things the latest I have written is the following:
Sub Macro1()
Dim cell As Object
Set cell = [ X ]
If H42 = cell Then
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:= _
"Sheet2!B2", TextToDisplay:="[ X ]"
End If
End Sub
I am trying to write some code to choose the last "comments" entered in column 13 and then copy the data to B17 on the specified sheet below.
I get an Excel Error Excel cannot complete this task with available resources. Choose less data or close other application THEN a VB error Method'open' of object 'Workbooks' failed
Code:
Dim MyMgr As String
Dim whichsheet as string
MyMgr = Range("D10")
whichsheet = Range("D11").Value
If MyMgr = "Manager1" Then
Set myBook = Workbooks.Open("destination", Password:="manager1") 'Home
[Code] ........
I have to create a formula to fine difference between 2 numbers.
There are columns A to Z.
Values will be populated in A1 to Z1. Sometimes the value will stop in between itself. For example H1.
So, I need a formula to catch the last populated cell (H1 in our case) and then find the difference between the value in its previous column.
H1-G1 should be the result I should get.
I'd like to get a reference to the last row or cell in a column of data.
View 9 Replies View RelatedI am trying to make a date auto populate when an entry is made into a specific cell.
Context:
Cell H has a drop down list of staff names who will be assigned to a project, once a name is selected from the drop down box:
Cell I needs to auto-display that days date
is this possible with just a simple formula?