Click On Cell To Bring Up That Row Information In Userform And Populate It
Oct 17, 2013
I have a spread sheet that has rows of information and once you click on the tally form button (top Left) you can search on the info and it will display in the list box once you click on a result. I have attached the spread sheet, with only 1 row as obviously I dont want to share work data on here.
My question is that, if I want to display a row in the form, I would like to be able to click on a certain cell (Incident # column), it would then recognise the row and display that row in the form.
At the moment I have a EVENT that will highlight a row if a cell is selected. Just thought I'd mention that in case it would interfere.
VB:
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
' If more than 1 cell is selected, then don't run the rest of the code
Application.ScreenUpdating = False
I am searching a database for a particular date and want the data corresponding to that date to be populated into a userform. So in short I want the data to be displayed in the userform. I am looking for ideas on how to do this efficiently. I currently do it with a list box, but it is only able to display one column of information. I hope this is clear.
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
Say a user inputs information into the user form, when they click enter, it enters all the data on the next available line in a workbook.
Is is possible for the user to click a cell on a previously entered row, and have the userform populate with the existing information?
example. say the user has to fill out 3 separate areas. 1, 2, 3. However the user only has data for 1 and 2. They go ahead and enter the infromation for 1 and 2 and click submit to transfer to sheet. Now later he gets information for area 3, can the row the information that he previously entered, lets say column 1, row 1, and it reopens the userform with the information for 1 and 2 prefilled from what he entered previously?
I'm using a little sub routine to bring up a pop up calendar when i click in a cell, everythings lovely but it annoyingly comes up when i select a clolumn or row that also contains that cell. modification to require a double click to display the calendar?
If I make a selection using a drop down, can I have it auto populate another cell with information associated only to the made selection? For instance, if I select January from drop down in A1, I want it to auto populate B1 with 100.
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
I've found the code below and tweaked to suit my needs but having trouble. Had it working one time. The code below calls a userform when the user double clicks on a cell. The form pops up and is not active/enabled. I cannot select anything on the form until I select a cell on the sheet, then everything on form becomes active/enabled.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) 'check cells for desired format to trigger the frmSel_WBS.show routine 'otherwise exit the sub Dim NumberFormat, DF NumberFormat = Array("[Blue]General") For Each DF In NumberFormat If DF = Target.NumberFormat Then frmSel_WBS.Show vbModeless End If Next End Sub
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
I need to create a simple code that will allow me to fill out the userform and then use a cmdbtn within the userform to transfer the information from the userform to specific cell in my excel spreadsheet.
I have a userform [AddEditMove] with a bunch of textboxes (something like 30) that create entries in a spreadsheet ["Move Records"] along one row. In addition to creating those basic entries, the textboxes also fill in other spreadsheets after manipulating the entered data in various ways.
Therefore, if an entry needs to be changed, it needs to be changed from the userform rather than just on the main sheet, or those other actions won't be taken. At least, that's how I see it now. I'm interested in knowing how other people have handled similar set ups.
Right now, what I think I'd like is for the user to be able to double click any entry on the main sheet and have that action call up the userform and autofill the data from the sheet so the user can change what they need to change and then update it. It would also require a tweak in the userform code -- "if called from cell click, then fill info in selected row, rather than next empty line" -- if that's possible.
I have spreadsheet with client names. I'd like to build logic that will open a form with client information when a user double-clicks on the client name. But I have a couple of problems.
- First, I'd like to protect the sheet and hide the formulas. But when I protect the sheet, I get the "the cell or chart you are trying to change is protected" error when I double click the protected cell.
- If I deselect the "Select Locked Cells" options when I protect the sheet, I no longer have the ability to double-click on the cell.
how I can double click on a cell yet not allow the user to edit the cell (or see the formula)?
1. When text is entered into a specific cell in the Master Sheet a new Tab is created named after this text and a second string of text i.e the date.
2.At the same time as this TAB is created I would like only the rows with checkboxes ticked in the Master Sheet to be copied to the new TAB(Not the Checkboxes themselves) [possibly using TRUE/FALSE in "B" row].
3.I would like the formulas, formats of these checked rows to be copied too.
4. Additionally the first 12 rows(all headers) and the last row(subtotal row)should be copied too.
The idea of the Workbook is to have an overall options sheet that is customised on a per customer basis with a record saved on a new tab in the same workbook.
I have a main spreadsheet that I am consistenty adding information to. The columns are : Company name, Contact, Territory, and Status. The main spreadsheet is titled "Main". I want 5 additional spreadsheets in the same workbook that are automatically pulling information from the "Main" spreadsheet, and populating the appropriate spreadsheet . For example...I have 500 entries of different companies in "Main". All of these companies are either categorized as "North, South, East, West, Offshore" in the Territory column. So, I would like my workbook to have 6 tabs...one "Main, North, South, East, West, Offshore." As of right now, I am Sorting the column, then copy and pasting into correct spreadsheet manually.
Sheet1 is a list of names, then a few columns of numbers. Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A... A large cell at the top of each sheet contains the formula to display the sheet name: =MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is... in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like... "look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base. I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column. But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
Is there any way to have a picture pop up when a label or textbox is clicked in a userform? I need the userform to stay open and usable while the picture is open. Basically the picture is supposed to assist the user of how to fill out the section.
I have a worksheet with several columns and 1,000's of rows. I have code that makes all "good cells" grey (color index 15) and all "bad cells" red (color index 3).
I would like to do 2 things...
1. If ANY cell is RED, cut the WHOLE ROW and "insert cut cells" below the header row (even if ALL other cells are grey), then repeat the process up the whole worksheet until ANY row with a red cell is at the top.
2. Create a new worksheet named "Trouble Cells", copy the header row along with any rows with red cells.
I would like to keep the formatting the same (for example, the title row is always yellow and is "28" high and all other rows are a height of "12").
I would also like to keep the column width of each column in the new worksheet as well.
I have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code: Private Sub cmdViewStock_Click() Sheets("Stock").Select Sheets("Stock").Range("B4").Select End Sub
When my worksheet is activated, code is executed which defaults the values in my userform controls. The users enter the appropriate data, and with the clicking of a command button, the data is entered into the worksheet. When that is complete, the idea is to return the user to same form, in a default value so they can enter in new data for submission. This will continue until the user selects the Exit button onthe userform.
This is resulting in an 'Object doesn't support this property or method.'
I'm not sure about the appropriateness here of the 'Application.Enableevents=False" here. Since the fields of the userform have change events associated with them, I need to disable that what the userform activation code defaults them.
I have a User Form that I am trying to open with a button click. I made a copy of one workbook with a new name. The Buttons and Macros were all copied as well. I modified the old Userform so that I can release Version 2 of the Userform, and now when I click on the button in Excel, I get the following error : Object doesn't support this property or method. Run-Time error '438'.
The code assigned to that button is as follows:
Sub Button121_Click() ' ' Button121_Click Macro ' Macro recorded 8/11/2002 by Kale Mayfield
' UserForm1.Show
End Sub
What am I doing wrong? HELP! Once you have the Userform populated with ComboBoxes,Textboxes, etc., is there now way of making changes to that Userform? If you make changes and rearrange the locations of the buttons and boxes and labels... does that mess up the button in Excel that opens the form to begin with?
I used the commandBar to create a right-click menu on a userForm but unfortunately I get an error 400 every time I click on the option "Edit" and I don't understand what I did wrong.
Sub CreateCmdBar() Dim st As CommandBar 'delete the pop-up if it exists On Error Resume Next Application.CommandBars("flexgrid_rc").Delete 'Disables enabled error handler in the current procedure and resets it to Nothing. On Error GoTo 0 On Error Goto 0 Set st = CommandBars.Add( Name:="flexgrid_rc", Position:=msoBarPopup, Temporary:=False) 'add two menu items to the new commandbar With st..................