=MIN(IF(B3:B32="",IF(A3:A32>0,A3:A32))) ArrayedOldest Date Array.xlsx
Following on from a previous post need to add to my (forums) array.
I need to find the location of a date which has been looked up in a cell based on the above formula which is in the attached.
Name Qtr Year
Org 112007
Org 222006
Org 332006
Org 442006
Org 542007
Org 612006
I want the code to say, If Qtr = 1 And Year = 2007, then bring back Org Name, If Qtr = 2 And Year = 2006, then bring back Org Name and so forth.
The code should loop through a range of constant data (Region Name), until the Region Name is blank.
Dim OrgCell As Range
Dim OrgTargetCell As Range
Dim RegionCell As Range
Set OrgCell = Sheets("DATA Removed").Range("A2")
Set OrgTargetCell = Sheets("Overdue").Range("A3")
Set RegionCell = Sheets("DATA Removed").Range("C2")
i = 0
OrgCell.FormulaR1C1 = _
"=IF(AND('DATA Removed'!R[-1]C[11]=1,'DATA Removed'!R[-1]C[12]=2007),'DATA Removed'!R[-1]C,0)"
Do
OrgTargetCell.Offset(i, 0).Value = OrgCell.Offset(i, 0).Value
i = i + 1
Loop Until RegionCell.Offset(i, 0).Value = ""
End Sub
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
I want to lookup some data and bring back the info in the last populated cell on the row, rather than column 4. I have written the below but it is bring back info from Column Index number 4.
=VLOOKUP(D4,'A2'!A:Z,4, FALSE)
I need a formula to check a range of parts and bring back a value of 0 if matched or the value in another cell if it doesn't match.
Part number H-200-3
Part number H-200-3-A
Part number H-200-3-B
If I enter any of the above part numbers then cell B1 returns 0 if it is a different part number then B1 would need to match cell A1.
create an array of active printers. I edited the code to write the array to a range, then populate a data validation list with the printer names. All works great. The goal was to select a printer name from the list and run a macro to print some sheets. However, the function doesn't bring back enough of the name to do this. how to edit the function to bring back the whole name.
For example: after running the function the 1st printer returned ="\rizzoHQ-ENG-04"...when i record a macro to print to this printer it needs ""\rizzoHQ-ENG-04 on Ne05:". Here is the function unedited, I bolded the part i think is controlling the name:
My vlookup fonction fell in a black hole after the november 23rd 2009.
What would you reckon?
I have a dataset which is dumped into my model every month. The Report tab is a "user form" whereby the user can select multiple search criteria. The dataset is then filtered according to the search criteria entered by the user.
Problem is, that if the user only selects 1 of 3 search criteria and the other 2 cells are left blank, the filter filters on these blank cells and doesn't retrieve any data. Any ideas how I can overcome this?
Sub PopulateReport()
Application.ScreenUpdating = False
Dim MyFilter1 As String
Dim MyFilter2 As String
Dim MyFilter3 As String
MyFilter1 = CStr(Sheets("Report").Range("C2").Value) ' convert cell value to string
MyFilter2 = CStr(Sheets("Report").Range("C4").Value)
MyFilter3 = CStr(Sheets("Report").Range("C6").Value)
Sheets("Waste").Select
Dim Rw As Long
Dim Rng As Range
Rw = Range("A65536").End(xlUp).Row
Set Rng = Range("A1:W" & Rw)
With Rng
.AutoFilter
.AutoFilter Field:=20, Criteria1:=MyFilter1
.AutoFilter Field:=2, Criteria1:=MyFilter2
.AutoFilter Field:=13, Criteria1:=MyFilter3
End With
how to display my excel worksheet using HTML maker as I've downloaded the software but have no idea how to use it!
Median Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells
Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010
So the median of the range is 2, thus we would want the formulas to bring back P3 and p4
Column 1..............Column 2
P3...........................P4
To set up the problem, I have a folder that contains files that are all named numerically, ex. 08-100, 08-101, etc. Each file is identical in format but contains different data, ex. cell B1 is alway "material weight", cell B2 is always "estimated man hours" and new files are added weekly.
I am trying to set up a master spreadsheet that all I have to do is enter the file name (08-102) in the first column, and the second column will return the data in a specific cell of that file.
i have the following macro which finds instances of a search criteria and brings them back to a results column. what i need is instead of having the word GD: appear before each result i need it once at the begining of the results
LastRow = Sheets("design owb").Cells(Rows.Count, 10).End(xlUp).Row
Application.ScreenUpdating = False
For i = 26 To LastRow
Target = Sheets("design owb").Cells(i, 10)
With Sheets("design")
For J = 2 To 54
For K = 4 To 11
If Target = .Cells(J, K) Then
Sheets("design owb").Cells(i, 11) = Sheets("design owb").Cells(i, 11) + "GD: " & .Cells(J, 15) + " | "
End If
Next K
Next J
End With
Next i
Application.ScreenUpdating = True
I have this spreadsheet that has over 20,000 rows. I was asked to build a search page to will bring back all transactions based on a primary key (account number). Here is a sample:
Account NumberDateComments2343566/2/2009 $ 111.43 3453465/1/2009 $ 89.34 5676552/5/2008 $ 643.23 8078989/3/2008 $1,245.34 12543612/5/2008 $ 56.65 2343562/2/2009 $ 343.54 3482459/9/2008 $ 78.76 9345641/2/2009 $ 356.22 2343565/3/2008 $ 529.66
The idea is to enter an account number like 234356 click a button and bring back:
Account NumberDateComments2343566/2/2009 $ 111.43 2343562/2/2009 $ 343.54 2343565/3/2008 $ 529.66
I got the button part done and using vlookup it brings back the first line. The problem is that it won't bring back all the rows just the first one.
I’m trying to send an array of values INTO a user defined function, do a little math on it, and then send the resulting array back to the caller. The caller in this case is an array formula in an excel cell.
I can get it to build an array after the math, but I can’t get it to pass the resulting array back to the formula. The following snippet is a simple version of the code. Here I am building the incoming array in the macro, but same difference at the end. The outgoing Oil_spgr variable never seems to contain the full, final array.
I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
Here is my formula now:
=IF(VLOOKUP(J2&" "&L2,'East Data'!M:AU,2,FALSE),"*",0)
J2 is the customer name
L2 is the week
"East Data" is the spreadsheet with all of the promotions and customers.
My formula below work perfectly. I was wondering if their is a way for me to idenify the location of each row in which all the conditions are true. So, for example, if the formula generates an answer of 2, in a different cell it would give me the address of the 2 rows.
=SUM((K9:K72/L93))-SUM((K9:K72/L93))
I have a worksheet where data has been entered from a userform. For each entry, there is a separate reference number in the form of contract number-schedule number-machine type-cage number (e.g. 123-123-ABC-1).
The machien type will not always be known so the user will need to do a search for the contract number-schedule number and then bring up all the possible reference numbers.
For example this could look like:
123-123-ABC-1
123-123-ABC-2
123-123-CDE-1
123-123-CDE-2
I would like this list of all possible values to pop up.
what look up function would work and how I can do this?
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View RelatedI am looking to write a macro that can look at a value (i.e. "X") in a cell and compare it to the elements in a 2D array (where one dimension corresponds to the start value and the other to the end value) that is found on another worksheet. If "X" falls between the starting and ending numbers then I would like the macro to return a string (say "Test1") to a cell on the same row and a couple of columns to the left. The string values are listed to the left of the start and end values on the first worksheet and are elements to a 1D array. I am trying to make this " loop" through all the cells that contain run numbers (I have highlighted the columns in yellow on the attached workbook). There are multiple (i.e. +12) worksheets in this project but I have only included two in the sample I am providing because of file size.
View 4 Replies View RelatedI am trying to do an if statement where I ask if the 2009 price is .50 or less away from the 2008 price, bring back "Check" See below:
2008 2009
$23.95 $24.15
Using excel 2007
I have a list of ID Numbers and Dates. Let's call this "List 1".
I also have a second list "List 2" which also contains a list of ID Numbers and Dates as well as a third column for Rating.
I am trying to extract the Rating for each ID Number from List 2 and display in List 1. The problem is that the Rating can change with time, so List 2 contains several different Date and Rating values for the same ID Number.
What I need to do is lookup the ID Number from List 1 and return from List 2, for that ID Number, the Rating at the closest date prior to the date for that ID Number in List 1. Example below:
List 1
List 2
ID Number
Date
Rating
111
17/04/13
5
[Code] ..........
I need to get a formula to calculate the average of the best 3 scores out of 4, but there is some that do not have a value in a cell (so some are only out of 3 scores not 4) and if i simply drop the lowest value and sum the rest, it will incorrectly calculate the average.
View 9 Replies View RelatedI have a table of data where each row is a person, and each column is a group that person might belong to. In the intersecting cell of a person row and group column is text showing what position they hold in that group (eg Director, Head, member etc). In many cases the cell is empty because the person is not involved with the group.
There are then two lookup tables which have scores; one for the group name and one for the position type. The group name is always the column header. I have used these lookup tables as I would like the scores for each group or position to be easily adjustable.
Probably best that I just attach an example. I tried to solve this using SUMPRODUCT. VLOOKUP on the two lookup tables would have been good but it seems it doesn't work with arrays the way I expected. My attempt (which doesn't work obviously!) is given.
I am looking for formulas for cells B21 and B22 that will return the value from column A corresponding to the occurence of the highest/lowest value of Index compared to cell B:19, that is, the most recent Index data.
This seems to be an excellent candidate for LOOKUP as the data in Column A are unique and sorted.
Then, we have cells B:25 and B:28. On what "Week Ending" did the Min/Max value occurred?
Bonus Question, if Excel encounters more than 1 value that satisfies the formula, what happens?
************************************************************************>Microsoft Excel - Book1.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB24C24B27C27=
ABCD1Week*EndingIndex*AIndex*B*208/11/06561.2385.9*308/18/06561.1382.2*408/25/06556.5375.9*509/01/06566.3389.7*609/08/06584.2410.2*709/15/06595.8397.9*809/22/06566.5463.8*909/29/06633.9375.9*1010/06/06599.1383.3*1110/13/06585.8384.7*1210/20/06588.6382.4*1310/27/06570.8375.6*1411/03/06620.9402.2*1511/10/06620.9402.2*1611/17/06623.6401.4*1711/24/06599.0406.7*1812/01/06647.6426.6*1912/08/06612.2393.4*20****21Lowest*Since***22Highest*Since***23****24All*Time*High647.6463.8*25Date:***26****27All*Time*Low556.5375.6*28Date:***29****Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have been assigned a task of finding the lowest cost of four possible solutions however I have quite an extensive list of items to work with. To make this easier, I need to be able to find the lowest cost in my row (which is not sorted by lowest to highest value) and return the column heading associated with that lowest cost.
View 2 Replies View RelatedI'm trying to use vlookup function in table 2 referencing table 1 using the approximate parameter. However, an approximate vlookup value is by definition the closest *least* value. Is there a trigger of some sort to locate the closest *greatest* value as well?
For instance, if the lookup_value in table 2 is 2.450 but the referenced table 1 only has 2.445 and 2.475, I will only retrieve the respective value related to 2.445 -- how would I retrieve the other value at 2.475?
Essentially, if a lookup_value rests in between two values of whatever is being referenced, I am trying to average those two closest numbers. Is there a function I've overlooked that may help with this?
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working.
=MIN(B2:B(G2-G3))
basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
I need the array portion of a lookup formula to change based on a cell value.
On a worksheet(named "groupings")that groups students according to ability level, I have data validation lists where teachers select the criteria for the group. In cell I5 they choose the period, and in cell L5 they select which assessment to look at.
Cell B8 will either say high low or medium. Then in cell C8 I have this formula: Lookup_Occurence($B$8, ??????, 1,1,2)
Again the array will depend on what is entered in cell I5 and cell L5.
I have attached one of the worksheets the lookup_occurence will be referencing. In this exit card worksheet if cell B10 (the name of the assessment) matches what the teacher chose in cell L5 on the groupings worksheet, then the array formula will be 'Exit Card'!Card1. If cell G10 matches what the teacher chose in cell L5, then the array would be 'Exit Card'!Card2. Where A9:C339 is named Card1 and cell F9:H339 is card2 etc.....
However, it gets even more complicated then that because within Card1 there are 8 periods, and if a teacher chose period 1 in cell I8 on the groupings sheet, then I only need the array to look at the period one data in the card1 array.
Essentially what I am trying to accomplish is create a page where teachers can group students by ability level according to any assessment they choose. On the exit card page the formulas currently equaling # Div/0 will say either high, med, or low depending on how a student performs on that assessment.
I have a workbook that is doing something I don't understand. In several places I am using arrays to transfer/modify information, then placing the array back onto the worksheet, and this works perfectly. The following code... doesn't.
(I've cut out unnecessary code like variable declarations - all my integer items are declared as Long)
Code:
Dim varA As Variant, varB(10000, 1) As Variant
Set wkDest = Sheets("a")
erB = 0
For lpTerm = 1 To 4
[Code]...
and several other ways. What happens is just null output, a full column of nothing. However, when I expand my worksheet range to two columns, all the data from varB appears - it is shifted down one column and row. So my data starts at .cells(2,2) instead of .cells(1,1). The data is all perfect, I've verified it left and right.... I just can't figure out why it's getting shifted like this.
Is there a good way to find out after the exists returns True in which place in the array the Z is located in ?
...
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
Z = a(i, ii) & ";" & a(i, ii + 1)
If .exists(Z) Then
msgbox "The array location for existing Z value is ..."...
...
Is there a standard way across all Excel formulas to have the cell location returned rather than the value of the cell itself?
In other words A33 instead of "52" (with A33 being the cell that contains "52")