i have a worksheet that in column A has multipule row that begins with:
"Subtotal By "
What i would like to do is find each of these rows and copy the data to another sheet
all the "Subtotal By " are grouped together but could be located in different areas of the workbook.
i have attached a file with an example.
I have data on sheet2 that needs to be copied to sheet1 when i run the vb script. It also does a load of other things so would like to keep the script a s short as possible.
Curently i run this for each cell i want to copy:
I have been having problems all morning and have not been able to solve it!
I am sure this is very simple....
What I would like to do is assign the result of a sum to a variable. This part is easy what I cannot fathom or find any help with is the multipule criteria bit!
Here is the detail.
Column A - Employee Number
Column C - Area
Column F - Type
Column D - Amount paid.
I would like to sum the amount paid based on the 3 criteria, Employee Number, area & type and assign this to a variable to be used later in a sub I'm playing with.
I've been looking through past threads and I can't find what I need to do anywhere. There was one formula that came close: =SUMPRODUCT((A2:A100="Aimbry")*(B2:B100="LW")*(C2: C100)). but this adds up all the matching results.
What I need to do is match the info in columns A and B and return a number in column C. The problem is that there are multiple rows with identical entries and I just want to return one of them. So I was thinking a version of the above that produced a mode or average would give the desired result.
I'm having some problems understanding how to change the sequence in loop structures..
This isn't the entire code, but maybe it will get the point across.
Currently the loop is giving me the following sequence..
"CL" "WTI OI" "HO OI" "RB OI"
"HO" "WTI OI" "HO OI" "RB OI"
"RB" "WTI OI" "HO OI" "RB OI"
What I want to get is:
"CL" "WTI OI"
"HO" "HO OI"
"RB' "RB OI"
Is there a way to the loop to go to: x y x y x y
Instead of: x y y y x y y y
Dim ContractCode As Variant
Dim ContractTab As Variant
ContractCode = Array("CL", "HO", "RB")
ContractTab = Array("WTI OI", "HO OI", "RB OI")
For Each x In ContractCode
For Each y In ContractTab
Debug.Print y
Debug.Print x
Selection.AutoFilter
Selection.AutoFilter Field:=3, Criteria1:=x
Cells.Select
Selection.Copy
Sheets(y).Select
Range("A3").Select
ActiveSheet.Paste
Next
Next
I have 10 tabs in a workbook, the first five tab is for 5 Departments for the Month of March, the other 5 is for the same 5 departments for the Month of April.
I want to compare a particular field for each Department for the two months. The field is in column N.
Is there a code that will copy column N for Finance March, Column N for April and paste them into another worksheet in the same workbook in Column A and B, then go to the next department HR and copy Column N for HR March and April and paste in the same worksheet where Finance already as in column D and E, then go to Operations March and April tabs and paste into the same worksheet as column Worksheet G and H.
Basically the copied columns are pasted March April next to each other for all the businesses in the new .
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
I either need to make it do this:
If column A in worksheet one corresponds with Column E in worksheet two, withing the same workbook, I need D,E,F,G of worksheet one to paste into D,E,F,G of worksheet two...
Is there anyway to do that... I am new to excel sort of... At least this part...
Or...
I need it so I can use the find tool and find/replace multiple items at once but replace them all with the same thing. What would I use in the find box to seperate different things for it to find... I tried commas and colons...
I have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
How would you set up a macro to delete numbers in a spreadsheet in one column that appear in another column or worksheet?
In other words, if I have the numbers 1,2,3,4,5,6,7,8,9, 10 in one column and in the same column, or another column or worksheet I have the numbers 1,2,3,4,5 - I need a way to delete 1,2,3,4,5. I know how to delete duplicates via the advanced filter but I want to have the duplicate and original deleted.
In the attached file, details sheet contains multiple instances of project with associated costs for each of 2006, 2007 and 2008. What I need is a formula (preferably) or a VBA that select distinct project names and populate column B of summary sheet so I can do a sum if. The problem is the project names changes dynamically every week and they are practically in hundreds.
View 9 Replies View RelatedI have column t6:t23 on sheet one that i want to copy and paste to the next available column in sheet2 but it has to start looking for the next available column starting at at row2 because row 1 has column header.
I know this can be done with (xltoright) just not sure how to do it
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
I am looking to do this without macros, but if need be they can be used.I have a worksheet full of actual and budget hours, going back 12 months. the headings look as follows:
Actual Hours June | Budget Hours June | Actual Hours July | Budget Hours July | and so on...
The months are always changing depending on when the report is generated. It could end at any month.
I am wanting to create a 3 month moving average of the ratio of actual hours to the budgeted hours. There is many entries in each column (tracked daily by each employee), thus they need to be summed. The best way of doing this I believe is identifying the last column and working backwards from there.
1) Add a new worksheet to my workbook called "CONTROL_1"
2) Copy contents (values and formats only) of column H from worksheet "All" to column A on the new worksheet.
I have a range from B20:Z520. I would like to copy the entire row B:Z if Z returns "1", with numerous rows having "1" To be specific, I would like it to be copied to N6 onwards. The active worksheet is named "Dashboard"
View 3 Replies View RelatedI am hoping to populate a column with data from another worksheet. Basically, I have a set of columns, one for Location, Zip Code, Longitude, and Latitude. I want a formula to say, if the location equals X, then pull the associated information from the other worksheet. -- I assume it would be an if or vlookup, or combination.
View 4 Replies View RelatedIf column F, G, H says PAP then I want it to return information from column A, B, C, D, E respectively into another worksheet. I have attached a sample
View 6 Replies View RelatedI want to search upwards in a column to find the last value not equal to a value (0,"", etc) so that I can perform a calculation using that value. Here is an example of the sheet.
A B
1 2121
2 1738
3 2159
4 2180
5 0
6 484
7 484
8 0
9 484
working my way down the column, what I want to do is take a value in column B and add it to the value in column A if the value in A is not 0. The first value in B will always equal the value in A if that value is not 0. If the search upwards shows only null fields or it hits the first row in the column without finding a value, that value in the current B cell should show the value in column A. I want the field to show null if A is 0. I want a formula that will look upwards in the column to find the last non-null value to add my value in column A. example : formula in B5 should show a null (""), the formula in B6 should show 84 (B4+A6), the formula in B7 should show 88 (B6+A7), formula in B8 should show null (""), etc. Column A will change values from time to time and I would like the formula to automatically be able to handle the change in values.
i have a workbook with over 100 odd worksheets of different names... i want to insert 1+ columns in every worksheet . For Example ...
in worksheet 1 name abc .. insert 1 column in column B (put clumn b data in column C)
in worksheet 2 name def .. insert 2 column in column B (put clumn b data in column d)
in worksheet 3 name ghi .. insert 3column in column B (put clumn b data in column e)
I have a userform with comboboxes and listboxes etc. The comboboxes have drop down lists which are populated from data in columns from a worksheet.
1.) During the execution of the userform, a value is selected from the combobox, which is place in a column on another worksheet. So far so good. If I select the same value again, nothing shows up in the row below the first selection. If I choose a different value it shows up. I have tried using different properties of the combobox but have not been able to get around this.
2.) I would like, when the excel file is opened that the userform is ready to go, ie enter data. I have tried putting the
Private Sub Workbook_Open()
UserForm1.Show
End Sub
in "ThisWorkbook" module but have had no success with it.
is there a method to do this besides writing them out individually?
View 5 Replies View RelatedI have to convert a excel workbook I have into a csv for import into a database. The workbook contains multiple worksheets that are named individually. What I would like to do is get a way or code to add a column to the beginning of each worksheet and then populate each cell of that new column (column A) with the name of the worksheet (of course only up to the range of the data). I already have a macro that can copy and consolidate the contents of all the sheets into a single sheet.
View 2 Replies View RelatedI have a sheet with 5 columns in use at the moment.
Col: A - E . Col C has a Score and Col D has Game #
I'll like some code to look at each cell in col D and based on the Game# copy the value from the corresponding Col C to the Game column that is set up for that Game. ( I can set these up manually )
Col D can contain both numbers or text
Something like
IF D2 = 23, C2 = H2
IF D2 = 29, C2 = M2
IF D2 = "HOME", C2 = W2
etc etc
Col D can contain up to 20 possible numeric values & 8 possible text values
Also: Since I know all the 28 possible values that Col D can contain, how can I also get those columns set up automatically using VBA and SUM those columns that are set up with the numeric values at the last row.
I have a simple list of data on a worksheet. It is appended occasionally by the program user. The new data is always added to the bottom of the list so the list grows increasingly longer day after day.
There are a couple of formulas at the top of the worksheet that calculate statistics from the list. I'd like to make the formulas apply only to the last 25 rows of data. Basically, I need a way to make the ranges in the formulas automatically adjust themselves each time the list grows so they always use the last 25 rows of data.
I can do it using VB but I'd rather just build this into the formula on the worksheet if possible.
What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View Relatedin my worksheet i want to show only column from A to BA and rows only 1 to 5000
View 2 Replies View RelatedIn Column A, anytime a specific "text" appears, I want to concatenate the information in the row, and place it into worksheet Data-list under a specific heading.
[URL]
The formula I would use (not vba) is =IF(A3="FN",B3,""), then I just copy it all the way down. However there are 27K cells, which is why I want a VBA Code
I have the following line in VBA which works.
[Code]....
I have a variable for the column adress of the second part of the formula so it looks like this:
[Code] ....
But it says I don't have the correct syntax.
