I have column t6:t23 on sheet one that i want to copy and paste to the next available column in sheet2 but it has to start looking for the next available column starting at at row2 because row 1 has column header.
I know this can be done with (xltoright) just not sure how to do it
I have data that looks like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHT ALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
I want it to look like this:
ADD ADD EMPTY
5 2
AGAINAGAINEMPTY BACK
26 17 1
ALL ALL EMPTY
24 19
ALRIGHTFINE OKAY ALRIGHTEMPTYRIGHT
1 2 3 3 1
i.e all the entries from column B that have the same thing in column A should be on a row together, with the number from column C under them.
If that's a bit hard then it would be OK if it looked like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHTALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
test.xlsx
I want the VB Code to do the following;
For each row in Column C, if the text starts with "Calls from service no", it must extract the last word and paste it into corresponding row in Column A. So if the macro finds a cell in Column C starting with "Calls from service no..", then the last word (the last word will always be a number and is seperated with a space) of this cell must be pasted in cell A45. So it must continue for all occurances in Column C. Sample of text in cell = "Calls from service no 0431324345" and "Calls from service no 3242134254" etc.
I also require similar, but this time it must extract as shown below.
If text is found in Column C starting with "Local" or starting with "Long Distance" or starting with "Mobile", only this text, ie "Local" or "Long Distance" or "Mobile" must be pasted in Column B.
It can be 2 different macros that I can run.
Example: A1, I go to school (001). I would like to copy only (001) and past to B1. like that and process to the last row of A1. or I would prefer manual last row.
View 9 Replies View Relatedsee attached spreadsheet. In sheet 1 I would like to look up each word in column D, seeing if they are in column B at all. Note if the word "Jill" is in D and "jilly" in a surname in B I would like it to get picked up. I have highlighted manually those that would get picked up. Those that do get picked up I would like to be copied into column C as per sheet 2 (this is what I would like it to end up like). There is a very long winded way of doing this using a find function and 1 column per word but as the actual sheet i'm using has thousands of different words this isn't really viable!
View 8 Replies View RelatedI have a spreadsheet of several thousand named items (in column B) with values associated with them in column A). The "name" field is a string of several alternative names for the item.
I have a list of ~50 items that I am trying to find the values for. Each uses one of the alternate names.
What I want is a function that will return the associated value in column A when one of my shortlist names is found.
For example, my big spreadsheet looks like:
AB
1dallas, DFW. 12345
2Atlanta, ATL, 23456
3Boston, BOS, 34567
4Chicago, CHI, 45678
5Los Angles, LA, LAX, 56789
And my list looks like
Atlanta
CHI
I want the output to look something like:
Atlanta2
CHI 4
Is the feasible? IT seems like there should be a way to do it....
I need to put a part of a text from a column and place it in a new collumn. At this moment I use 2 columns and an extra sheet to solve this.
I have a collumn with a lot of data like:aaa-bc
bbb
abc-ba-bd
aa-bb
bbb-xx-yy
aa
abc-yy
klmn-zz
klmn-yy-ff
What I need is behind every cell a new cell with only the 1st part like:aaa
bbb
abc
aa
bbb
aa
abc
klmn
klmn
What I do now is use a new column with this formula:
[Code].....
And I made a translation table in which the 1st 4 characters are translated to what I want to see. In a 3d column I use
[Code]....
to get the results I need. Since I need to get results like this very often this method is very time consuming.
Is there a formula available I can use with only 1 new column?
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have 5000 urls in one column and I want to take some part of the content from the urls and wanted put in next column in their respective cell.
how I wanted the data in the next column.
1) Add a new worksheet to my workbook called "CONTROL_1"
2) Copy contents (values and formats only) of column H from worksheet "All" to column A on the new worksheet.
I have a range from B20:Z520. I would like to copy the entire row B:Z if Z returns "1", with numerous rows having "1" To be specific, I would like it to be copied to N6 onwards. The active worksheet is named "Dashboard"
View 3 Replies View RelatedWhat VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View RelatedI have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I have 10 tabs in a workbook, the first five tab is for 5 Departments for the Month of March, the other 5 is for the same 5 departments for the Month of April.
I want to compare a particular field for each Department for the two months. The field is in column N.
Is there a code that will copy column N for Finance March, Column N for April and paste them into another worksheet in the same workbook in Column A and B, then go to the next department HR and copy Column N for HR March and April and paste in the same worksheet where Finance already as in column D and E, then go to Operations March and April tabs and paste into the same worksheet as column Worksheet G and H.
Basically the copied columns are pasted March April next to each other for all the businesses in the new .
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
View 5 Replies View RelatedI need to do something to my workbook, and I need to do this task:
When I insert/delete a column between E & F in sheet 1, the formula (not the value) in the column E was applied too to the new column I've inserted/deleted..
Then, when that happened to the sheet 1, It would happen too to the other sheet automatically..
So I don't need to insert/delete the row and copy the formula manually for each worksheet..
I know that I could simply solve it with grouping the sheet tab..
But I have plenty of data that needed to be inserted and applied with the formula..
I will attach the little example : insert.xlsx
And one more thing, I received this VB code from [URL] ..... for inserting the column:
VB:
Private Sub Workbook_SheetBeforeRightClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
And this code for deleting the column:
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
i will illustrate what i want to do here with these two excel sheets below. I want to some sort of coding that searches for A and B (Name of the Branch) from sheet 2 and copy the No. of transactions given against A & B from sheet 2 to sheet 1.
OR keep just A & B in sheet 2 and delete the rest of the rows so that i can manually copy and paste values against A & B.
SHEET 1
Name of the Branch
No. of Transactions
A
B
[Code]....
I want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -
Here's what I'm trying to do (improperly apparently!!):
Book1, ''Master'' is the sheet, I'm copying info into, and Company info are the sheets im getting info from each of my .xls files in a folder, ie cell C2. Just in case, to be clear, I have all my vba projects opened from each .xls book, and need to copy, from each .xls book, in Company info, cell C2 into Master column A:
Sub collate_cell_data()
Dim dest As Range, wbNew As Workbook, wb
Set wbNew = Workbooks.Add
[Code] .........
Basically, i have a workbook that contains 2 worksheets with stock data for two stock holding sites, we're consolidating our stores and need to confirm what stock is held at both sites. I need to compare column C on both sheets to find if an item exists on both sheets, and if so copy the entire row from Sheet 2 onto the next free row on a new sheet. Col C on each sheet contains the stock number, however, on Sheet 1 the stock number is abbreviated ot the final 7 letters, with Sheet 2 showing the FULL stock code.
I need whatever is in "Sheet 1:Col C" (for example '1234567') to be compared to whatever is in "Sheet 2:Col C", and if a match is made (for example 9999-00-1234567) then the row containing the match be copied to the next free row on Sheet 3.
1. I need a script to retrieve data (member number) from "Search List" worksheet and then to search it in "Members List" worksheet.
2. Once the search result (member number) found, e.g. 00311, it will copy the entire row to the "Only Selected" worksheet.
I have also attached a sample excel for better understanding.
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I've managed to use the following VBA to filter a sheet based on the value of cell B1:
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B1")) Is Nothing) _
Then
Exit Sub
End If
Cells.AutoFilter Field:=1, Criteria1:="=" & Range("B1")
Range("B1").Select
End Sub
I have tried to use this for a different sheet with "fixed head data" that needs to stay at the top of the page (range B1:K7), for printing purposes.
How to modify the above code to filter column A (from row 8 downwards) depending on what's entered in the cell A1.
Also - if possible, "if A1 is empty - display all rows".
I have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
How would you set up a macro to delete numbers in a spreadsheet in one column that appear in another column or worksheet?
In other words, if I have the numbers 1,2,3,4,5,6,7,8,9, 10 in one column and in the same column, or another column or worksheet I have the numbers 1,2,3,4,5 - I need a way to delete 1,2,3,4,5. I know how to delete duplicates via the advanced filter but I want to have the duplicate and original deleted.
In the attached file, details sheet contains multiple instances of project with associated costs for each of 2006, 2007 and 2008. What I need is a formula (preferably) or a VBA that select distinct project names and populate column B of summary sheet so I can do a sum if. The problem is the project names changes dynamically every week and they are practically in hundreds.
View 9 Replies View Related