Worksheet Formula To Find End Of Column
Feb 6, 2007
I have a simple list of data on a worksheet. It is appended occasionally by the program user. The new data is always added to the bottom of the list so the list grows increasingly longer day after day.
There are a couple of formulas at the top of the worksheet that calculate statistics from the list. I'd like to make the formulas apply only to the last 25 rows of data. Basically, I need a way to make the ranges in the formulas automatically adjust themselves each time the list grows so they always use the last 25 rows of data.
I can do it using VB but I'd rather just build this into the formula on the worksheet if possible.
View 4 Replies
ADVERTISEMENT
Aug 7, 2013
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
View 1 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
May 20, 2014
The simple table (attached) represents our problem.
We want the letter in Column-B that corresponds to the last non-zero entry in Column-A. So in the example provided, the answer will be cell B12 which is "L". Also, if there are blanks (rather than zeros) below the last non-zero entry, it still needs to work.
View 11 Replies
View Related
Dec 11, 2008
I had posted this earlier but it was moved. I think this post will explain it better. I put data into a worksheet called "Budget" each week. When I put the data in I type a date in Cell "BL7". In another sheet called "EV Report" row 8 has week ending dates (i.e. Sunday of each week). I want to run a macro after I change the date ("BL7") and data in the "Budget" sheet that will search row 8 of the "EV Report" sheet to find the date in cell "BL7" of the "Budget" sheet. Once it finds which column that date is in I want it to put a formula in row 13 of the same column (the one found based on the date of BL7) that will add the value in row 12 of the same column with the value in row 13 of the previous column.
I don't want the formula to be there until the macro is run. I'm doing this because I have a graph of the formula and I don't want the graph to show the other cells.
View 2 Replies
View Related
Feb 2, 2009
I have a a spreadsheet with content (text) in one cell pr line. The content can be in the range column 1 to 8. I want to make a formula where I get the number of the column where there is content. I know how I can make this by using nested IF's, but are there any better proposal?
View 3 Replies
View Related
Nov 10, 2008
I have 13 columns (C-O) of data that will span up to 1000+ rows. I want to put a single row of cells at the top of the sheet that will display the last row of data from all 13 columns. I want the row at the top to always represent the last row of data, which will always be the most current data.
This is what my data will look like: ....
View 9 Replies
View Related
Aug 27, 2013
I am trying to come up with a macro that will find rows that contain the words �as % of Revenue� and then calculate and apply the appropriate formula to the actual and budget columns. I have attached a sample of what the source data look like.
The formula divides the category�s total expense by the revenue in row 4. For a complete macro, I would want to also subtract the budget result from the actual result and put its result in the �better (worse)� column. I need to use this on 12 or so different workbooks which is why I�m wanting a macro.
Here is my attempt to accomplish this task; however, I quickly realized it is woefully inadequate because I neither understand how to apply it to the different columns or how to find the next instance of �as % of revenue�).
VB:
Sub Macro1()
'
' Macro1 Macro
'
Range("B10").Select
Cells.Find(What:="as % of Revenue").Activate
Range("B20").Select
ActiveCell.FormulaR1C1 = "=R[-1]C/R10C"
Range("B21").Select
End Sub
View 8 Replies
View Related
Feb 26, 2012
I'm trying to find a formula that will find an original entry using 4 criteria original entry is cases ordered.
columns A,B,C,D will have to match then give me a result in column E to find original entry if there is one otherwise I will have to enter new row and original entry for cases ordered.
Eg.
A = section
B = description
C = size
D = region
E = cases ordered
Row 2 = fruit, apples, medium, north, 25
Row 45 = fruit, apples, medium, north,
View 3 Replies
View Related
Jul 7, 2014
Sheet 1
Sheet 2
UPC
Sku
[Code].....
I would like to find the value from Sheet2 Column1 in sheet1 Column1 and return value from Sheet1 Column2 and Column3 into Sheet2 Column2 and Column3
And if it doesn't find anything just return Not Found
The problem that a Vlookup is not working for me is because I want it to be the exact text from sheet2 column1 but in sheet1 column 1 it should not be exact as it might have some extra text as seen in the illustration above
View 3 Replies
View Related
Apr 24, 2014
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....
View 7 Replies
View Related
Jul 19, 2013
I need to do something to my workbook, and I need to do this task:
When I insert/delete a column between E & F in sheet 1, the formula (not the value) in the column E was applied too to the new column I've inserted/deleted..
Then, when that happened to the sheet 1, It would happen too to the other sheet automatically..
So I don't need to insert/delete the row and copy the formula manually for each worksheet..
I know that I could simply solve it with grouping the sheet tab..
But I have plenty of data that needed to be inserted and applied with the formula..
I will attach the little example : insert.xlsx
And one more thing, I received this VB code from [URL] ..... for inserting the column:
VB:
Private Sub Workbook_SheetBeforeRightClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
And this code for deleting the column:
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
View 9 Replies
View Related
Jan 8, 2009
I have a lookup tab which contains three columns: Column A is a tax ID #, Column B is a set of numbers and Column C is a list of street names. I need help with creating a lookup type formula for my column AB in the (worksheet/tab) titled 2009, which will look at and compare the data in columns F & G and compare them to columns B & C in my "lookup" tab and if a similar address is found based on both the street name and number then the tax ID # affiliated with that address from the "lookup tab" will be automatically placed in the column AB in the 2009 tab. I hope this makes sense.
View 4 Replies
View Related
Dec 26, 2013
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
View 3 Replies
View Related
Aug 9, 2007
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I am using the following ....
View 9 Replies
View Related
May 27, 2014
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
View 3 Replies
View Related
May 30, 2014
I have 10 tabs in a workbook, the first five tab is for 5 Departments for the Month of March, the other 5 is for the same 5 departments for the Month of April.
I want to compare a particular field for each Department for the two months. The field is in column N.
Is there a code that will copy column N for Finance March, Column N for April and paste them into another worksheet in the same workbook in Column A and B, then go to the next department HR and copy Column N for HR March and April and paste in the same worksheet where Finance already as in column D and E, then go to Operations March and April tabs and paste into the same worksheet as column Worksheet G and H.
Basically the copied columns are pasted March April next to each other for all the businesses in the new .
View 1 Replies
View Related
Feb 26, 2010
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
View 9 Replies
View Related
Feb 26, 2010
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
View 9 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Feb 14, 2009
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
View 10 Replies
View Related
Aug 5, 2009
DSee the attached.
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
View 5 Replies
View Related
Jan 10, 2009
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
View 9 Replies
View Related
Aug 3, 2006
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
View 9 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Apr 4, 2014
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
View 4 Replies
View Related
Jan 31, 2013
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
View 2 Replies
View Related
Sep 9, 2013
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
View 4 Replies
View Related
Jan 3, 2007
I either need to make it do this:
If column A in worksheet one corresponds with Column E in worksheet two, withing the same workbook, I need D,E,F,G of worksheet one to paste into D,E,F,G of worksheet two...
Is there anyway to do that... I am new to excel sort of... At least this part...
Or...
I need it so I can use the find tool and find/replace multiple items at once but replace them all with the same thing. What would I use in the find box to seperate different things for it to find... I tried commas and colons...
View 14 Replies
View Related
Oct 5, 2013
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
View 3 Replies
View Related