What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Repliesi am trying to make a VBA that will find a certain value (BELCS), select the value, and copy it to another worksheet. this is what i have so far:
For Each BELCS In ActiveSheet. Range("B2:B" & ActiveSheet.Range("B51161").End(xlUp).Row)
If BELCS.Value = "BELCS" Then
BELCS.Select
Selection.Copy
Sheets("BELCS").Select
ActiveSheet.Paste
End If
Next BELCS
i am trying to get it to select the whole row when it finds that value but when it runs it says that i can't make a selection of the BELCS,
So I have an option on my userform that the user input selected.
I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]
Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.
Need code and here to input in the Code sheet?
I have two workbooks: Workbook1 has two sheets – Cash Register and Suppliers; and Workbook2 has one sheet – Clients. The users of Workbook2 do not have access to Workbook1, and information entered in Workbook2 is required (and has to be manually re-entered) in Workbook1.
I tried IFs and VLOOKUPs to pull the data, but due to the large number of cells, the workbook is awfully slow – taking a very long time to save (even with Automatic Calculation/Recalculate before save turned off).
I am using Excel 2007.
This is what I am trying to achieve:
When a user enters an ID number, which begins with either “S” (e.g., SB-00010) or “P” (e.g., PADA-012-034-0567), in column E of Cash Register:
(1)
If that ID number begins with “S”, I want the code to look up that ID number in column A of Suppliers and copy the corresponding cell from each of the following columns:
B
C
D
E
F
G...........
I am trying to copy worksheet between 1 workbook to another. But even the worksheet was successfully copied but the code inside wasn't. Do I need to copy the VBA module manually (create new proc/sub) ? Or there is a setting during Worksheet copy process?
View 4 Replies View RelatedI am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I am revamping someones Monthly Stat sheet for them. I am hoping to get a code that will copy the most current sheet which will always be the last one of the Workbook. I then would like the user to be Prompted to rename the sheet (Unless it can automatically generate the name which would be the next month). For example the sheet I need to copy is currently "January 2008" AND THE new sheet should be titled February 2008. At the end of February they need to run the code again and the sheet will of course be named March 2008 and so on...
The other thing I need to do is after the sheet is named:
1) I need the sheet named placed in cell A1 of the NEW sheet
2) I need to copy the VALUES in E9 to O9 and Paste them into E5 to 05 of the Newly created sheet
I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"
After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)
Here is the code I have:
Windows("2.xlsm").Activate
Sheets("Report_P").Select
Sheets("Report_P").Copy After:=Workbooks("New_report.xlsx").Sheets(9)
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I am trying to put together some code to have Excel to copy all the text files from a folder with numerous text files, all of which have identical formatting, to one worksheet. Furthermore, I need the copying event to occur every time the workbook is opened so that it will "refresh/overwrite" the worksheet with all of the files in the folder.
I have lifted some code from several sites which would seem to an untrained eye to accomplish what I am trying to get done, however I run into a file path error.
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
i have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
I am using the following code to copy the contents of a DDE feed.
Code:
Private Sub Worksheet_Calculate()
Worksheets("Sheet2").Range("A1").EntireRow.Insert Shift:=xlDown
Worksheets("Sheet1").Range("A3:F3").Copy
Worksheets("Sheet2").Range("A1:F1").PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End Sub
What I want to do is only copy the row when the columns contain data, as it stands at the moment it's copying blank rows to sheet 2. Is there a way that I can do this?
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
I have a worksheet containing code to hide itself when the sheet is deselected:
Private Sub Worksheet_DeActivate()
Sheet16.Visible = xlSheetVeryHidden
End Sub
After unhiding this sheet and modifying it, I copy it. This new copy becomes the 'production' copy, and the self-hiding sheet is blanked, leaving me with a hidden blank template and a new sheet. However, the self-hiding code is copied along into the new sheet. I'm looking for a way to delete the sheet code from the copy. The best I've found is how to remove a module from the workbook.
Sub New_Sheet()
ActiveSheet.Copy After:=Sheets(1)
ActiveSheet.Name = Range(" F8").Value
Sheet16.Visible = True
Sheet16.Select
Range("B13:F22").ClearContents
Sheets(2).Select
ActiveSheet.Shapes("Button 1").Delete
Range("A8").Select
ActiveSheet.PageSetup.PrintArea = Range("A1:R35").Address
Call Sort_Sheets
End Sub
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies View RelatedI have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View RelatedI have an excel sheet being used as a mini database table.Rows = records, columns = fields. I have some VBA to create a copy of base template in the workbook, then populate the new template with the data from a row/record in the db. I currently have about 100 records. After about the 57th record I recieve RT error 1004. "Copy method of worksheet class failed". I think this is becuase excel is running out of memory. My laptop has 1gig of ram, and i have closed all other apps when running the macro.
Is there a way to free up memory while the vba is running, without clearing my "for" or count position which tells the macro to create a new sheet and which row/record in the db to populate the data in the new sheet.
I have column t6:t23 on sheet one that i want to copy and paste to the next available column in sheet2 but it has to start looking for the next available column starting at at row2 because row 1 has column header.
I know this can be done with (xltoright) just not sure how to do it
What is the proper VBA code to copy the contents of column T and column W (beginning at row 2 and ending at the last nonempty cell) in sheet 1 to column D and column E in sheet 3? Column T and column W always contain the same number of nonempty cells.
1) Add a new worksheet to my workbook called "CONTROL_1"
2) Copy contents (values and formats only) of column H from worksheet "All" to column A on the new worksheet.
I have a range from B20:Z520. I would like to copy the entire row B:Z if Z returns "1", with numerous rows having "1" To be specific, I would like it to be copied to N6 onwards. The active worksheet is named "Dashboard"
View 3 Replies View RelatedI've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
View 5 Replies View RelatedI need to do something to my workbook, and I need to do this task:
When I insert/delete a column between E & F in sheet 1, the formula (not the value) in the column E was applied too to the new column I've inserted/deleted..
Then, when that happened to the sheet 1, It would happen too to the other sheet automatically..
So I don't need to insert/delete the row and copy the formula manually for each worksheet..
I know that I could simply solve it with grouping the sheet tab..
But I have plenty of data that needed to be inserted and applied with the formula..
I will attach the little example : insert.xlsx
And one more thing, I received this VB code from [URL] ..... for inserting the column:
VB:
Private Sub Workbook_SheetBeforeRightClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
And this code for deleting the column:
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim lngRow As Long
Dim ws As Worksheet
If Target.Row = 1 Then
Cancel = True
[Code] .....
i will illustrate what i want to do here with these two excel sheets below. I want to some sort of coding that searches for A and B (Name of the Branch) from sheet 2 and copy the No. of transactions given against A & B from sheet 2 to sheet 1.
OR keep just A & B in sheet 2 and delete the rest of the rows so that i can manually copy and paste values against A & B.
SHEET 1
Name of the Branch
No. of Transactions
A
B
[Code]....
I want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -