Apply Conditional Formatting Once Across 168 Sheets

Jul 3, 2014

I have a workbook that contains 168 sheets of data (it's an extract from a PM tool) which is effectively a status report from each project in our portfolio. Contained within each status report are some financial data that shows a Plan number and a Forecast number for which I want to apply conditional formatting to this section (this is the same section for each sheet), to all the 168 sheets without having to go individually into each sheet. I have searched here and all the varying responses to a similar situation as mine, do not cater for the number of sheets that I have. And I need to do this on a monthly basis at monthend. So in the example below I want to apply conditional formatting if the Forecast (Cols D & G) are greater than Plan (Cols B & E). Is there a way of doing this just with the conditional formatting or would it need a VBA script?

Col A Col B Col C Col D Col E Col F Col G
Financial Summary - Selected Project Currency: USD

Current year total cost
Overall project cost

[Code] .....

View 1 Replies


ADVERTISEMENT

Apply Conditional Formatting Using VBA And UDF?

Sep 14, 2012

I am trying to create a macro (which will go in an add-in, using Excel 2007) which will apply a custom format to any selected cells which have their formulae hidden (Format Cells, Protection, Hidden). A similar macro works fine for locked cells.

Here is the UDF I wrote, which returns True/False based on the Hidden status of a cell:


VB:
Public Function Hidden(Check_Cell As Range)
Hidden = Check_Cell.FormulaHidden = True
End Function

[Code]....

just place all three pieces of code into a module, and change the first line of the two macros to a standard "Sub Macro1()" type format.

View 9 Replies View Related

Conditional Formatting Apply To 2 Columns?

Dec 31, 2013

I wish to have one conditional format apply to K and L. Presently it's L only where it works.

=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))

Why when I change the range from =$L:$L to =$K:$L does it not apply to both?

View 3 Replies View Related

Apply Conditional Formatting If The Cell Value Is Between 300-500?

Feb 4, 2014

is possible to construct a conditional formatting scenario and at the same time apply that formatting if the cell entry is within 10% either way of the logical test?

For example if you apply conditional formatting if the cell value is between 300-500 is it possible to add in a 10% swing on each value?

View 3 Replies View Related

VBA Conditional Formatting - Apply To Two Columns

Jun 27, 2014

I have a conditional formatting issue, using VBA.

My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.

My code is below.

Code that applies to column "M" only...

View 3 Replies View Related

Macro To Apply Conditional Formatting

Feb 29, 2008

I'm trying to find a macro to apply conditional formatting to a large number of cells,

What I would like to do is when cell E96 has a value of a, cells E3:F95 are shaded in grey. Then when cell G96 has a value of a, cells G3:H96 are shaded in grey, and so on down to IU96 having a value of a and cells IU3:IV96 shaded in grey.

View 9 Replies View Related

Apply Conditional Formatting To Bars In Bar Charts

Aug 29, 2006

I have created an excel file that contains a lot of worksheets which contain a lot of raw data and charts. There are 5 different tabs for 5 different companies. Each tab currently contains only 1 year of raw data for that company. Then I have another excel worksheet that has nothing but charts on it. Each chart is a bar chart that shows each of the 5 companies. It also shows the current rate for the month for each company and the 12 month average for each company. On the chart there are also 3 lines. There is a standard line that we try to meet each month. There is also a line for the upper control limit and a line for the lower control limit. Here is my problem:

The 2 bar charts (current rate for the month & the 12 month average) are created and updated by the raw data in each of the 5 data sheets.

Based upon the values in each of the cells that create and update the bars on the charts themselves:
I want the bars to be RED if the values are below the lower control limit.

And I want the bars to be GOLD if the values are above the upper control limit.

And I want the bars to be green if the values are in between the upper and lower control limits.

View 2 Replies View Related

Looping & Conditional Format: Finds A "J" It Will Apply Conditional Formatting To A Row Of 4 Cells Directly Adjacent?

Feb 9, 2009

I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.

View 2 Replies View Related

Apply Conditional Formatting To Cells That Meet Certain Criteria?

May 19, 2014

Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...

View 1 Replies View Related

Apply Conditional Formatting If The Cell Contains Validation List?

Jul 13, 2013

I have a table. I want to apply conditional formatting to the entire table so that wherever a cell contains a dropdown list (validation list) the cell is formatted with a different colour.

View 3 Replies View Related

Apply Conditional Formatting To A Cell When It Is Left BLANK

Nov 30, 2008

I'm trying to apply conditional formatting (shading) to cells that are left blank.

(Purpose: I am designing a research template for a client to complete with data and want the spreadsheet to show them where they've "missed a bit"!)

(When I go to the conditional formatting box, it asks me to specify when "cell value is"..."between/not between/equal to/not equal to" etc. But there's no option to specify when the cell is blank.)

View 2 Replies View Related

Apply Conditional Formatting To Range Of Cells That Contains Formulas?

Aug 11, 2012

Is there a way to apply conditional formatting to a range of cells that contains formulas?

View 6 Replies View Related

Apply Conditional Formatting To Highlight ONLY New Content On Column

Mar 24, 2014

I have a spreadsheet and I want to color particular cells in a column with a new color - i.e. any new changes need to be highlighted. I know there's a way to do tracking changes in excel, but it just sticks a little flag almost invisibly in the corner of the cell. I want to be able to bring the spreadsheet back to our administrator and say hey the stuff in red is new.

On a related note - I am working on this massive spreadsheet that is a .csv but I am saving it as an exel spreadsheet - is that ok? I am assuming that if I save it as a csv, it will return to the original formatting just without the colors, filters, etc changes I made - which is fine because I think somehow the .csv file will be uploaded to the system and no further changes need to be made.

I found out the hard way when you have a .csv file and make changes and then save it, you lose all the fun row/column size adjustments, color, etc - but I figure in the meantime I'll work on it as a excel spreadsheet and then return it to it's natural .csv file status.

View 1 Replies View Related

Conditional Formatting To Apply To All Cells In A Column In Pivot Table

Apr 25, 2014

I am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?

Image attached : Capture.JPG

View 2 Replies View Related

Conditional Formatting - Cell To Change Color When Apply Specific Value

Dec 4, 2012

I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?

Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.

View 5 Replies View Related

Unable To Apply Conditional Formatting With Numbers ( Font And Fill Of Same Color)

May 22, 2014

I m unable to apply conditional formatting with numbers ( font and fill of same color).

like:-

if press 1 , cell and font should be of same color and if 2 with different color and so on

as of now either formula is applying on cell or font but not on both

View 1 Replies View Related

Excel 2010 :: VBA To Apply Cell Protection Based On Conditional Formatting Result

Jan 27, 2012

I am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.

I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.

I am using Excel 2010 and Vista.

View 1 Replies View Related

Conditional Formatting Across 7 Sheets

Apr 26, 2012

I have an excel workbook that is tracking parking spaces in seven different garages. When we run out of space in one, we move to the next garage, however it is tandem(double) parking so I have to make sure I match up roommates. In Column F on all sheets, I have an apt identifier. How do I apply conditional formatting for all of the sheets so that if/when the apt identifier is entered twice, then it turns bold.

For example:

Sheet1

Column F
AB1
AB5
AB10

Sheet 2

Column F
BC3
BC4
AB1 - this would turn bold when I entered it into the cell because it matches another cell and it would turn bold on Sheet 1 too.

The entries are non-consecutive, so there are blanks within the column.

I have Excel 2007 and can use vba. I can add columns after column M.

View 8 Replies View Related

Hiding Sheets Using Conditional Formatting?

Aug 7, 2014

i have a list of services with "yes" or "no" options in the column beside it. Description for each service is given on separate sheets (Workbook sheet 1, Workbook sheet 2..etc). i want to format it in a way that if i choose "no" for one of the services, its description sheet hides.

View 3 Replies View Related

Highlight Duplicate Value In Two Different Sheets Using Conditional Formatting

Feb 1, 2014

How can we find or highlight the duplicate value in two different sheets using conditional formatting.

View 3 Replies View Related

Conditional Formatting Duplicates Across Multiple Sheets

Aug 13, 2009

Conditional formatting duplicates across multiple sheets. I have been using the formula

View 5 Replies View Related

Conditional Formatting Of Cells In Multiple Sheets

Sep 6, 2013

I have twelve sheets that each have a total score on cell G10 that I want to have copied to a thirteenth sheet in a specific column (F5-16). What would I have to do to make that happen? The G10 cell is an auto-summed cell, if that makes a difference.

Also, is there a specific way to create formulas?

View 3 Replies View Related

Using VBA To Apply Formatting?

Nov 23, 2013

I want to apply conditional formatting by VBA. Cell Q2 contains the month number, (in this case 11). I want each cell in the range D2:D50 to be filled in red and the word 'UNPAID' appear if Q2 is greater than 10 and the cell is blank, otherwise no formatting at all. I'd like this to be triggered on the Worksheet_SelectionChange event if at all possible.

View 4 Replies View Related

Apply Formatting To All Worksheets

Aug 31, 2007

I have this macro and all I want to do is apply it to every page of my worksheet with a loop and can't find what kind of loop I need:

Sub format()

' Keyboard Shortcut: Ctrl+r
'
ActiveCell. Offset(-37, 0).Rows("1:1").EntireRow.Select
Selection.Copy
ActiveCell.Offset(37, 0).Rows("1:1").EntireRow.Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.Range("A1:K37").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With

View 3 Replies View Related

Apply Formatting If Any Of These Words Are Present

Apr 29, 2013

Column A has 200 names.

I want the names John, Tom, George, Frank and BillyBob to be filled with blue.

I want the names Sally, Mary, Kathy and Gertrude to be filled with pink.

I want the names Ebenezer, Vader and Fagin to be filled with black...and so on.

View 5 Replies View Related

Formatting Won't Apply To My Cell With A Formula

Nov 26, 2005

I downloaded the checkbook register from Microsoft.com and am trying to add a
few cells at the end to quickly calculate my outstanding debits and credits
so that I can balance my statements automatically. I figured out how to write
the formula properly (eventually), but the cells will not take on the
currency format no matter what I do. I have tried pasting the format from the
other cells within the register, tried clearing the format and reapplying the
currency format, tried accounting, etc.

View 9 Replies View Related

Apply Formatting To All Embedded Charts

Jan 20, 2008

I have a worksheets ( named TRACES) that contains 96 scatter charts in (4 groups of 24)and 8 line charts (1 group of 5 and 1 group of 3).

I would like to create some VBA code to loop through the different groups, the graphs in each group needing the same formatting.

how to do the looping for each group with or without hardcoding in each of their chart names.

View 9 Replies View Related

Only Apply Conditional Format If Cell Val > 0

May 10, 2013

I have a column in a sheet referencing data from a column in another sheet in my workbook. I want to apply conditional formatting on these numeric values, from red for lowest vals to green for highest. However the fact that my column is referencing cells that will not yet have data means that they are being pulled over as 0. I am not displaying zero values in cells but the zero vals are still being included in the conditional format. Is there any way to discount these zero vals?

View 2 Replies View Related

How To Apply Conditional Format To A Range With VBA

Feb 27, 2012

I recorded a macro in which I applied a conditional format to a range (the selection).But, when i replay this macro, the conditional format is only applied to the first cell in the range. This can be seen in the "Manage Rules" dialog of Conditional formatting, where the "applies to" column shows only one cell, even though a range of cells was selected by the code.

I set a breakpoint at the first line of code here, and confirmed that the selection is correct, and indeed it is, as in the immediate window, ?Selection.Address correctly gives "$O$6:$O$21".

[BRK, Selection.Address="$O$6:$O$21"]
Selection.FormatConditions.Add Type:=xlExpression, Formula1:= _
"=O6/(O6+P6)>25%"
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority
With Selection.FormatConditions(1).Interior
.Pattern = xlGray16

[code]....

why the conditional format ends up only applied to cell O6 after the code runs?

"How can i apply a conditional format to a range of multiple cells, based on an expression, using VBA?"

Note that my range is within a PivotTable (but still, this works fine in the UI when i record the macro and the conditional format is correctly applied to the entire selected range).

View 1 Replies View Related

Apply Conditional Format On Several Rows?

Aug 12, 2012

I have a conditonal format of cells across Row 2 based on the contents of cell D2. The formula for the conditional format is

=$D$2="NONE"

The formatting applies to these cells:

=$F$2:$G$2,$I$2:$K$2,$M$2:$N$2,$O$2,$T$2:$V$2,$X$2:$AA$2

I would like to fill in the same conditional format down to 51 other rows but the formatting for each row should be based on the contents of its own cell i.e. $D$3, $D$4, $D$5 etc. How can I do this with code?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved