column "A1" i have a set date in the format of year / month / day (2007/01/01)
i want to extract from that information the "Month" in Text form e.g from cell A1... cell B1 = January.
i tried "=month(a1)" then custom set the cell to "mmmm" but this seems to display a random month which doesnt co-inside to cell A1.
i require this information to feed a pivot table i am working on and wondered if anybody could help.
just a side note... after this i would be looking for a formula to work out (based upon the month) which Quarter it falls under... then the week (1-5) based on the date within cell "A1" to feed the results for the pivot table. though this is some way off going by my current plight.
I am trying to update a spreadsheet for 2012 to 2013 and want to use a formula to change SUNDAY 8 January to Sunday 9 January and so on for rest of year.
I'm graphing data from November 1994 to present. Since it's such a long time period, I only want to indicate a given year once (1994, 1995, 1996, etc.) with a tick mark every quarter (e.g. 1994 | | | 1995 | | | , etc).
I'm having difficulty doing so since the graph starts in November. The graph right now shows 1994 as a full year and thus the data doesn't correspond with the correct dates.
I have about 80,000 dates. What I need to do is to place an x by the date if it falls inbetween January. For example, I have start Date in A1 and End date in B1. If the start date was 10/20/2013 and the end date was 6/11/2014 then that woub give me an "x" because it went through January. If the start date was 11/23/2013 and the end date was 1/1/2014 that would give me an "x" because it fell in January but if I had 8/4/2013 as a start date and 12/29/2013 then that would be blank. Hope that I made myself clear enough.
I need a formula for identifying the last cell, of every third cell, that has an numeric entry, of a row. For example, in a range of (F7:V7), I need a formula that examines F7,I7,L7,O7...., and displays the last cell that has a numeric entry, while ignoring the other cells, ie G7, H7, J7, etc.
when i use a simple sum it only returns 0 but if I use the same cells and manually add them ie A1+A2+A3 and so on it give me the answer ? As there are over 500 cells it would be a pain to type them.
I have a workbook that is taking the avarage percentage of efficency over a possible of 7 days. If there were only 5 days of production it would average only 5 days. It pulls info from a tab that is call "Datalink" which is just that. As we have started our new fiscal year the person who uses this came to me with this problem
1) GrpIV on C15 is returning # DIV/0! and we need it to return 0. See the attachment.
I have always used unique ways to randomly make selections in my life, and was thrilled to learn that Excel could pick a name(not just a number) from a list. I've used the =INDEX($A:$A,RANDBETWEEN(1, COUNTA($A:$A)),1) function and entered items into Column A (or another if needed, and updated by trial and error accordingly). It worked very well for me for a long time and then stopped working. In multiple documents, with multiple lists (not connecting to each other), all of a sudden every random item started giving the #NAME error.
I need a formula that can return the value from a cell in the same row it searches. The row is unsorted and has blank cells. Seacchs row A12:X12 returns the text in C4 (data validation List) in A19 on a different sheet.
The results of the formula in cell K36 in the attached spreadsheet returns a value of null. It should be $1,200. Am I blind or have I done something wrong.
There are about 15 cells with formulas similar to this. They are calculating a value for a row and at the end all of them should add up should equal C101.
The problem is the value that formula returns has to be two digits and I know it almost never is. But it ALWAYS equils C101. However because it only shows two digits somtimes if you manulally add up the value that you see it does not its off by +/-.01.
I need to fix it so that it does equal C101 AND if you were to add up the digits (with 2 decimal places) it will also equil C101.
I placed this formula in cell A1 in workbook number 2which is suppose to grab what ever name is in cell A4 of workbook 1 However if the cell is blank it is returning a "0"I want it to be blank if there is no name in the cell?
For some reason it is returning #VALUE! in some cells. I think its something to do with the last part of the formula where it is bold.
The formula as you can see looks at data and matches relevant data to return specific depending on what has been matched. Now at the end it is matching the correct data and return that value however i want to divide the value by another (another value*4.33).
The formula below was written a couple of years ago and I just discovered an error. It returns an "S" for the value 0789 when it should be a "C", (Consecutive).
******** ******************** ************************************************************************>Microsoft Excel - FL MID PLAY 4 CONSECUTIVES.xlsm___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutT215=OPQRST215078907893SSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a two different formulas the return a numbered result(PO Number) in the same column. I then vlookup both of them with the same formula into a pivot table, one returns the result one doesn't. format appears to be the same.
I created a table for a check register. Column D is the transaction amount and column I is the updated balance. Column D has no formulas. It is where I enter the transaction amount. I checked all entries and even re-typed them. I extended the decimals out to the maximum and they are all. $$.CC000000000etc - no fractions of pennies. However the Subtotal 109 formula at the bottom of the table computes the answer with fractions of pennies even though there are no entries with fractions of pennies. And at row 118 in column I it also starts computing it as fractions of a penny.
Column I has a formula. Row 1 of course is titles. The second row is my begining balance with this formula: +"Table Name"[[#This Row],[Amount]] In other words what is in Column D row 2 as my first transaction, the beginning balance. The rest of the column has this formula +I(row above)+$D(that row) so in column 3 it is +I2+$D3 and so forth down the rest of the table. It had read +I2+"Table Name"[[#This Row],[Amount]] but I changed it to $D because I thought that might fix the error. It didn't
Columns D and I are the only ones with dollar amounts and really any numbers, except for the dates in column B. E is the envelope, F is the category, and G is the transaction status (cleared, pending, etc.). They have drop down boxes. Column H is notes. It is formatted as text. In the transaction amount column (D) I enter debits as negative numbers and credits as positive. e.g., a check written for $20 is -20.00 and a deposit of $20 is 20.00. Column I, my balance does not have any negative numbers. -fortunately-
The problem is minor and I could work around it. However it impacts my formula which tells me that I "balance." It will not return the value "Balanced" as it is computing a variance between my bank balance+uncleared items being equal to my CR balance by a fraction of a penny.
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I'm using the formula below to count the distinct number of values in the range, many values are repeated so this formula only counts each one once, it works sometimes. For some reason I get a #Div/0 error once in a while.
The entire range might not always have a value, when I get the error if I add text to the remaining cells of the range the error is cleared.
I do not want to use a If (iserr(myformula),0,myformula)) because there are still values that need to be counted even if the range is not totally populated.
