I placed this formula in cell A1 in workbook number 2which is suppose to grab what ever name is in cell A4 of workbook 1 However if the cell is blank it is returning a "0"I want it to be blank if there is no name in the cell?
View 4 Replieswhen i use a simple sum it only returns 0 but if I use the same cells and manually add them ie A1+A2+A3 and so on it give me the answer ? As there are over 500 cells it would be a pain to type them.
View 9 Replies View RelatedI have a workbook that is taking the avarage percentage of efficency over a possible of 7 days. If there were only 5 days of production it would average only 5 days. It pulls info from a tab that is call "Datalink" which is just that. As we have started our new fiscal year the person who uses this came to me with this problem
1) GrpIV on C15 is returning # DIV/0! and we need it to return 0. See the attachment.
I have always used unique ways to randomly make selections in my life, and was thrilled to learn that Excel could pick a name(not just a number) from a list. I've used the =INDEX($A:$A,RANDBETWEEN(1, COUNTA($A:$A)),1) function and entered items into Column A (or another if needed, and updated by trial and error accordingly). It worked very well for me for a long time and then stopped working. In multiple documents, with multiple lists (not connecting to each other), all of a sudden every random item started giving the #NAME error.
View 5 Replies View Relatedis there a way to get the unique entries from a list with out blanks using only one formula?
currently i use
=if(countif(a$1:a1,a1)=1,a1,"")
to get unique entries
and
Function NoBlanks(DataRange As Range) As Variant()
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' NoBlanks
' This function returns an array that consists of the non-blank values
' in DataRange. The function must be array-entered into the complete range
' of worksheet cells that are to receive the result. For example, if
' you want the results in B1:B10, select that range, type.................
I have searched the threads high and low, but no one seems to have come across this issue: My formula works fine untill it comes across a blank in Comparison!E16: =IF(AND(Comparison!E14=Comparison!E15,Comparison!E15=Comparison!E16),"",IF(AND(Comparison!E14=Comparison!E15,Comparison!E16=""),"") IF(AND(Comparison!E14<>Comparison!E15),Comparison!E14))
I am comparing cells from a previous sheet onto Comparison so that I can see where the discrepancies lie.
I want to:
return nothing if all the cells match;
return nothing if the first two match, but the third is blank;
return the value if the first cell isn't matching
keeping in mind that this is only for the top cell: Comparison!14 - I will then have to bring it down to 15 and 16
I need a formula that can return the value from a cell in the same row it searches. The row is unsorted and has blank cells. Seacchs row A12:X12 returns the text in C4 (data validation List) in A19 on a different sheet.
View 6 Replies View RelatedThe results of the formula in cell K36 in the attached spreadsheet returns a value of null. It should be $1,200. Am I blind or have I done something wrong.
View 7 Replies View RelatedHow to make vlookup work right? I have tried it once and it worked but I can't get it ot work again.
I changed the format to text for the data I using and the data I looking in to see if that would fix the ref# or N/a error.
Is the formatting one possible issue?
I am slow to vlookup but I used the formula as
1. the lookup value is the serial #
2. the table_array is the entire worksheet that I am searching in - or should I just use the column that hold the values I am looking for?
3. the column_index_num is ??
4. [range_lookup] is FALSE.
I have a formula that looks like this:
=IF(ISERROR((C101/G119)*G104)," ",((C101/G119)*G104))
There are about 15 cells with formulas similar to this. They are calculating a value for a row and at the end all of them should add up should equal C101.
The problem is the value that formula returns has to be two digits and I know it almost never is. But it ALWAYS equils C101. However because it only shows two digits somtimes if you manulally add up the value that you see it does not its off by +/-.01.
I need to fix it so that it does equal C101 AND if you were to add up the digits (with 2 decimal places) it will also equil C101.
=IF(O23="","",IF(SUMPRODUCT(('Container Price List'!$A$2:$A$19959=O23)*('Container Price List'!$C$2:$C$19959=S23)*('Container Price List'!$D$2:$D$19959=P23)*('Container Price List'!$B$2:$B$19959=T23),'Container Price List'!$F$2:$F$19959),SUMPRODUCT(('Container Price List'!$A$2:$A$19959=O23)*('Container Price List'!$C$2:$C$19959=S23)*('Container Price List'!$D$2:$D$19959=P23)*('Container Price List'!$B$2:$B$19959=T23),'Container Price List'!$F$2:$F$19959)*R23,SUMPRODUCT(('Container Price List'!$A$2:$A$19959=O23)*('Container Price List'!$C$2:$C$19959=S23)*('Container Price List'!$D$2:$D$19959=P23)*('Container Price List'!$B$2:$B$19959=T23)*('Container Price List'!$L$2:$L$19959))/SUMPRODUCT(('Container Price List'!$A$2:$A$19959=O23)*('Container Price List'!$C$2:$C$19959=S23)*('Container Price List'!$D$2:$D$19959=P23)*('Container Price List'!$B$2:$B$19959=T23)*('Container Price List'!$J$2:$J$19959*4.33))))
For some reason it is returning #VALUE! in some cells. I think its something to do with the last part of the formula where it is bold.
The formula as you can see looks at data and matches relevant data to return specific depending on what has been matched. Now at the end it is matching the correct data and return that value however i want to divide the value by another (another value*4.33).
I need a dynamic formula in A1 that returns min value in column B in a range of the last input and 15 cells back.
Then I need another dynamic formula in B1 that returns max value in column B in the same range.
Can an if statement return a formula (e.g. =IF(A1=1,C1+D1,0))
View 9 Replies View RelatedThe formula below was written a couple of years ago and I just discovered an error. It returns an "S" for the value 0789 when it should be a "C", (Consecutive).
IF(OR(AND(ISNUMBER(MATCH({0,1,2,9},$O215:$R215,0))),AND(ISNUMBER(MATCH(MIN($O215:$R215)+{0,1,2,3},$O215:$R215,0)))),"C",IF(SUM(IF(FREQUENCY($O215:$R215,$O215:$R215)=3,2,1))=2,"DD",INDEX({"S","D","T","Q"},MAX(FREQUENCY($O215
******** ******************** ************************************************************************>Microsoft Excel - FL MID PLAY 4 CONSECUTIVES.xlsm___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutT215=OPQRST215078907893SSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Some reason my sumproduct formula returns #Value!
=SUMPRODUCT((Data_2005!$A$2:$A$170=A$2)*(Data_2005!$F$2:$F$170=$A5)*(Data_2005!$S$2:$S$170))
wb is attached (stripped down for upload)
I have a list of data with 2 column. One is a column of unique values, the other column has a lot of blanks.
I'd like to auto generate both columns without any of the blank data from column 2. I've attached a mock spreadsheet of what I'm invisioning.
My below countif formula is counting the blanks how can i revise to not count the blanks?
=COUNTIFS('Rep Summary'!$A:$A,$A8,'Rep Summary'!$T:$T," ")
I am currently using the STDEV formula. Is there a way, that i can make
the formula use data from nonblank cells, only. For example: A1, A2, A5 will
have numbers listed. A3 & A4 are blank. Can i get the formula to use only
A1, A2, & A5?
I have a very basic formula, and I'd like it to ignore a blank cell. The sheet has cells A1, B1, and C1. I want the formula to subtract A1 from B1, and display the difference in C1. B1-A1=C1
Currently, if A1 has a value (it always has a value in that column) and B1 does not, C1 shows the negative value of A1. Ex: A1= 100, B1= blank. [blank cell] - 100 = -100
I want C1 to show nothing unless there's a value in B1.
How do I construct the formula so that it doesn't do the calculation for blanks?
I am in need of a solution (probably VBA) that can fill a range of cells with a formula IF they are blank. Ideally that range is a named range I can define in Excel. If that is too hard, then a hard coded column I hand-edit the script for is tolerable. Also, ideally, this script auto-executes whenever data changes on the sheet.
You formula I will populate is:
=IF(ISNA((VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1),"",(VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1)
..but a simpler formula can be stubbed in.
NOte that it does have relative references, so the script needs to adhere to normal EXCEL conventions of enumerating cell references.
If the script points to a refernce cell that contains the formula that is uber.
Maybe it should do copy and paste instead of a string replacement in order to leverage EXCEL's referencing?
I'm stuck on this, and this would be VERY useful for many of my sheets to be able to point to a refernce cell containing a formula to fill in.
I have a two different formulas the return a numbered result(PO Number) in the same column. I then vlookup both of them with the same formula into a pivot table, one returns the result one doesn't. format appears to be the same.
View 6 Replies View RelatedI created a table for a check register. Column D is the transaction amount and column I is the updated balance. Column D has no formulas. It is where I enter the transaction amount. I checked all entries and even re-typed them. I extended the decimals out to the maximum and they are all. $$.CC000000000etc - no fractions of pennies. However the Subtotal 109 formula at the bottom of the table computes the answer with fractions of pennies even though there are no entries with fractions of pennies. And at row 118 in column I it also starts computing it as fractions of a penny.
Column I has a formula. Row 1 of course is titles. The second row is my begining balance with this formula: +"Table Name"[[#This Row],[Amount]] In other words what is in Column D row 2 as my first transaction, the beginning balance. The rest of the column has this formula +I(row above)+$D(that row) so in column 3 it is +I2+$D3 and so forth down the rest of the table. It had read +I2+"Table Name"[[#This Row],[Amount]] but I changed it to $D because I thought that might fix the error. It didn't
Columns D and I are the only ones with dollar amounts and really any numbers, except for the dates in column B. E is the envelope, F is the category, and G is the transaction status (cleared, pending, etc.). They have drop down boxes. Column H is notes. It is formatted as text. In the transaction amount column (D) I enter debits as negative numbers and credits as positive. e.g., a check written for $20 is -20.00 and a deposit of $20 is 20.00. Column I, my balance does not have any negative numbers. -fortunately-
The problem is minor and I could work around it. However it impacts my formula which tells me that I "balance." It will not return the value "Balanced" as it is computing a variance between my bank balance+uncleared items being equal to my CR balance by a fraction of a penny.
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I am using this formula
View 9 Replies View RelatedI'm using the following formula, and keep getting a zero when the cells in D4 are blank when I simply want exactly whatever is in D4 to be shown...
=IF($B$2="Alness",Alness!D4,IF($B$2="Amsterdam",Amsterdam!D4,IF($B$2
="Atlanta",Atlanta!D4,IF($B$2="Budapest",Budapest!D4,IF($B$2
="Dalian",Dalian!D4,IF($B$2="Debrecen",Debrecen!D4,IF($B$2
="Durban",Durban!D4,IF($B$2="Edinburgh",Edinburgh!D4,IF($B$2
[Code] ..........
=IF(AND(G9=0,H9=0),"",IF(AND(G9=0),1,H9-G9/G9))
this works great execot for the percentag is wrong when h9 and g9 are populated
I'm using the formula below to count the distinct number of values in the range, many values are repeated so this formula only counts each one once, it works sometimes. For some reason I get a #Div/0 error once in a while.
The entire range might not always have a value, when I get the error if I add text to the remaining cells of the range the error is cleared.
I do not want to use a If (iserr(myformula),0,myformula)) because there are still values that need to be counted even if the range is not totally populated.
=SUMPRODUCT((B16:B1500"")/COUNTIF(B16:B1500,B16:B1500&""))
column "A1" i have a set date in the format of year / month / day (2007/01/01)
i want to extract from that information the "Month" in Text form e.g from cell A1... cell B1 = January.
i tried "=month(a1)" then custom set the cell to "mmmm" but this seems to display a random month which doesnt co-inside to cell A1.
i require this information to feed a pivot table i am working on and wondered if anybody could help.
just a side note... after this i would be looking for a formula to work out (based upon the month) which Quarter it falls under... then the week (1-5) based on the date within cell "A1" to feed the results for the pivot table. though this is some way off going by my current plight.
I have this formula in E19: ...
View 9 Replies View RelatedI have a VLOOKUP formula in a cell that refers to another cell that has a formula in it.
When I type the actual numerical result (rather than the formula) in the formula cell, the vlookup works. When the formula (that equals the same number) is in there, the vlookup cell is returning #n/a.