I’m currently writing a code, which will enable me to run a code, which will reply to a selected email with standard text in the cc, subject, body, and so on.
The code that I managed to write creates a new email message, instead I want the code to select "reply to all" to the email that I’ve selected, and then fill in the cc, subject, body, and so on.
Sub test()
Dim msg As Outlook.MailItem
Set msg = Application.CreateItem(olMailItem)
msg.Display
msg.CC = "test@hotmail.com"
msg.Subject = "testing!"
msg.Body = "hello all" & vbNewLine & vbNewLine & "We agree to your call..."
I have a standard mail format which was saved in my hard drive(mail includes attachments and few contents in body) via excel. I've several vendor (#)numbers in my excel sheet, everyday I've to send a mailer to different vendors with necessary documents.
1. Vendor number EX: 12345 was hyperlinked, when I click on that 12345 standard mail format should be opened in outlook and the Vendor number 12345 to copied as TO:12345 CC: defined names in the outlook mail.
I have a macro which sends an excel file to certain recipients via outlook. I have embedded the voting buttons in the same macro. However, when I respond to the voting buttons, I am unable to add the sender and another group. The current macro .readrecipients, enables me to send it to the sender. I would like to add another group id to the same.
I am currently trying to automate a receipt system. I have successfully managed to create an email based on calculated Excel data. The email is created using the following routine.
callref="12345" strbody = "The main text of the email"
Set OutApp = CreateObject("Outlook.Application") OutApp.Session.Logon Set OutMail = OutApp.CreateItem(0)
On Error Resume Next With OutMail .To = "John Smith" .BCC = "" .Subject = "Test email receipt - " & callref .Body = strbody .Display 'or .Send - still developing!!! End With On Error GoTo 0
Set OutMail = Nothing Set OutApp = Nothing
My problem is that there will be several people using this system so I would like to include a reply address which is different from the sender. Alternatively, I would like to send the email from a different account (but I have to assume that the users will have their own email accounts open).
I am using PrimoPDF, as suggested elsewhere in the forum, to attach a PDF to an E:Mail and send it automatically, it works a treat ... however, I do have to manually intervene to click on the OK button & then again to click on YES when the filename is duplicate. I would like to automate these actions and am looking for a way to do it. It looked like the SendKeys command was perfect, but I'm not 100% sure how to do it. The PrimoPDF window is open, named as "PrimoPDF", but is not my active window, so I have put PrimoPDF.SendKeys "{Enter}"
... into the program but I am getting the error message "Run Time Error '424': Object required". Is this something to do with my code ? I am guessing that the program isn't recognising that PrimoPDF is an open & inactive window, so am I missing a prefix here or is it something more serious, like having to add a new Component or Additional Controls ?
Is there any way someone can put the option of "SOLVED" on the post reply when you are the orginal poster.
Now you have to reply to the post then go back into your orginal post to mark it solved. they would be more willing to mark the thread solved. I have noticed many people get an answer and never respond or mark solved.
in the "Order for EMS" and "Order for FEDEX" there have 1 product exist, now the customer need to type the country in the "F35", and the Price of weight will look back to the sheet "EMS Weight" and "FEDEX Weight" but for example, if i type Japan in both sheet, the EMS that one is correct 1kg to Japan is $168 but in FEDEX that one is not correct 1kg to Japan is $169 but now show $342, the formula in "G36" should be correct, what's wrong of my formula????
I have a sheet that has 2 fields that i need a yes/no answer from. Basically if b = "P1" then a should be less than or equal to 4 to reply good otherwise it should reply no. but if b isnt "P1" but instead is P2 P3 or P4 then it should => 10, 30, 40 respectively.
I want to tell Excel that, if a cell value is between 1 and 100, to enter one result in another cell. If the value is between 101 and 250, enter another result in that same cell. If the value is between 251 and 500 enter another result in that same cell and so on about another 12 times.
I have a formula that is in ColF Row4, and it is copied down to ColF Row 13. But trouble is that when I autosum this column I get 6, but the answer should be 8. The data in Rows A-E are extracted from an external data source. I've attached the spreadsheet. =IF((AND(A4=7,D4="")),1,(IF((OR(A4=7,D4>=2)),D4,0)))
I have to following code. I have an issue now where I have to Pop a textbox from based on the answer to one of my questions.
If cboProjOffset = "Other" Then userSalOther.Show
Problem is I actually want the text box to populate on the same line of the range answer in column m. At present it doesnt seem to be doing this. Can anyone help?
Public gintEditMode As Boolean Public gintTotalEntries As Integer Public gintLineNumber As Integer Private Sub cboProjOffset_Change() If cboProjOffset = "Other" Then userSalOther.Show End If End Sub
I have a few 2007 workbooks that are set up to track and compare individual budgets over time. The majority of the cells are referencing workbooks that have yet to be created.
On opening these workbooks the users are confronted with an informational window informing them that "This workbook contains one or more links that cannot be updated", to which they are instructed to choose "Continue". Is there code I can add to these workbooks that would automatically choose "Continue" once a user enables the security warning for Automatic updates of links? I believe this would be the same as an On Open event.
I would like to add a drop down that pops up only when a certain answer is given in a previous cell. For instance, if the user picks "Single Door" in cell E2, then in cell E6, I would like a box to pop up that says "HL/HR?" so that in cell E7, they have a drop down & can select either HL or HR. But, if they pick anything other than "Single Door" in cell E2, I don't want a box to pop up in cell E6 to prompt them to do anything else.
Sheet1 ABC1S.NoCountryCode2E8481234567CroatiaE8483E8351234568SloveniaE835472123456900Ireland725JM123457000LuxembourgJM Excel tables to the web >> Excel Jeanie HTML 4
The macro I am working on will ask the user if they wish to transfer data to one of two Forms, held in two separate worksheets. The worksheet names are Record Form Games 3583 & Record Form PE 3581. The msgbox will ask "Is the data being transferred to Record Form 3583?" If Yes the sheet "Record Form Games 3583" will be set as the sheet as the one to transfer data to. If no "Record Form PE 3581" will be the destination sheet. This is what I have so far:
Sub Do_Admin() Dim Record_Form As Worksheet Msg = "Is the data being transferred to Record Form 3583?" ans = MsgBox(Msg, vbYesNo) If ans = vbYes Then Set Record_Form = Sheets(Sheet"Record Form Games 3583") End Sub
My macro cuts and pastes a section of one sheet over the top of each remaining sheet in the workbook. It pauses before each paste and presents a message box (relating to copying over a named range) requiring the user to manually click on "Yes" in response to the question before continuing on. How can I modify my macro so that it finishes without requiring the user to click on "yes" for each sheet. In other words, how do I get the macro to automatically answer "Yes" to the message box ??
I am trying to determine if I can write a formula that will read text in one cell, such as insurance and if true enter the amount from another cell and if false then 0. I have tried a IF statement by add the text to name manager. However, the answer is 0 rather than the amount in the selected cell. I might need to use a different formula or function.
I have three different sets of numbers on a r12m that I have to add and divide by different numbers and not quite sure I have the formula right as when I do it manually on a calculator it comes out different.
So I am creating a board game in excel. I currently have a draw card feature to draw random cards. I also have section above where you can fill in the answer to the question and another 2 sections that flip to correct or incorrect. Those formulas work as =IF(AND(Sheet1!J6="When resubmitting the claim to another insurance should you be voiding an adjustment to the S code if one is posted?",Sheet1!I2="Yes"),"That is Correct!"," "). I have another for if Sheet1!i2="no" then it flips to that is incorrect. I want an OR formula that will be like if multiple cells have any text in them it will display them but only one cell at a time. So essentially a way for multiple questions to be able to be drawn and you can answer those questions and be told if they are correct or not.
im looking to return an answer in cell c28. in b28 it will say "best goalkeeper" in c28 i need a formula to look in range d2:d6 then return the highest answer and correspond that to whats in b2: b6. so we could say
I have the attached worksheet with clients' names in four columns (A-D). The first names and last names must remain separate. I need one additional column that shows whether a full name (first and last) in C and D also appears in A and B.
Then one more column that shows how many times the name in C and D shows up, but only if it is also in A and B.
I have a workbook that contains a macro that when executed creates a copy (duplicate) of one its sheets and places it in itself (the same workbook). The macro then prints the newly created sheet. After printing, the macro then erases the newly created sheet so that it is no longer a part of the workbook. My problem is that I get the Excel message "Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete". I would like add to my macro so that 1) the message is skipped or 2) the macro answers the message box (with Delete) so that no user input is required. I would like it if the user did not have to respond to this message.
