The following formula shoud give an answer of 178. I think I am placing the
parenthesis in the wrong position.
The answer I get is 308669
=(((F22*71449)*0.4)+16147/C22)
Cell-F22 number is 1826
71449 is a constant number
0.4 is a constant number
16147 is a constant number
Cell-C22 is 10.8
I have the attached worksheet with clients' names in four columns (A-D). The first names and last names must remain separate. I need one additional column that shows whether a full name (first and last) in C and D also appears in A and B.
Then one more column that shows how many times the name in C and D shows up, but only if it is also in A and B.
How can I get this to read each, (if (and statement) and give the correct answer. And not give me the 1st underlined statement answer in cell D10. If that also equals true.
But if any other cells G11 thru G14 equals OUT. It still will give the 1st statement.
I need the answer to be the only one of them correctly that’s equal true.
I know that the 1st underlined statement = true. Because G15= OUT .....
see the attached 'Example' excel sheet.
I'm not the best at explaining, but I think that the excel sheet is pretty straight forward.
In Sheet2, cells C3 and D3 are manually entered by the user. I am looking for a formula for B3 that will take the information entered into C3 and D3, find the row in Sheet1 in which column C=Sheet2!C3 and column D=Sheet2!D3, and give the unique corresponding result from Sheet 1 for that row in column B .
So, for example,
if C3=A and D3=102, then the result would be 444
if C3=A and D3=104, then the result would be 111
if C3=B and D3=102, then the result would be 111
The combination of C3 and D3 is always unique and will never have more than one possible result in column B of Sheet1.
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.
below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2
120%
12
>=2
130%
13
>=2
140%
[code].....
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click()
With frmConference
.txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0)
.txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0)
.txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0)
End With
End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
How can I change this number for the actual Date?
"your formula is missing --) or (. Check the formula and then add the parenthesis in the appropriate place. The following is one long string. I broke it up to make it easier to read.
=IF(OR(ISNUMBER(FIND("J",M117)),K114,
OR(ISNUMBER(FIND("S",M117,)),K112,
OR(ISNUMBER(FIND("HOH",M117,)),K117,
OR(ISNUMBER(FIND("MF",M117)),K113,
OR(ISNUMBER(FIND("QW",M117)),K116,
OR(ISNUMBER(FIND("B",M117)),K115,0
in the "Order for EMS" and "Order for FEDEX" there have 1 product exist, now the customer need to type the country in the "F35", and the Price of weight will look back to the sheet "EMS Weight" and "FEDEX Weight" but for example, if i type Japan in both sheet, the EMS that one is correct 1kg to Japan is $168 but in FEDEX that one is not correct 1kg to Japan is $169 but now show $342, the formula in "G36" should be correct, what's wrong of my formula????
View 3 Replies View RelatedI am trying to determine if I can write a formula that will read text in one cell, such as insurance and if true enter the amount from another cell and if false then 0. I have tried a IF statement by add the text to name manager. However, the answer is 0 rather than the amount in the selected cell. I might need to use a different formula or function.
View 10 Replies View RelatedI am using this formula for long now
=SUMPRODUCT(('[Diesel Statement.xlsx]Nov 12'!$C$2:$C$251=$H$1)*'[Diesel Statement.xlsx]Nov 12'!$G$2:$G$251)
every month i just add a new sheet and change the month name in the formula to that eg
I changed it to
=SUMPRODUCT(('[Diesel Statement.xlsx]Dec 12'!$C$2:$C$251=$H$1)*'[Diesel Statement.xlsx]Dec 12'!$G$2:$G$251)
but now it is not calculating the answer is coming as #value!.
Then I tried to add up by
=VLOOKUP($H$1,'[Diesel Statement.xlsx]Dec 12'!$C$2:$G$215,5,TRUE)
but it does not add all the entries only one entry is shown.
I want the total of the column G. looking up for values in C = H1 value
I would like to use IF function, to get the answer, if the mark is less than or equal to 20, the answer is AVERAGE, if the mark is between 21 and 25 the asnwer is GOOD, if the mark is between 26 and 30 the asnswe is VERY GOOD, if the mark is above 30 then the asnwer must be EXCELLENT.
View 4 Replies View RelatedI have a formula that is correct all the way up to adding the last *K9. here is an
example:
C9 a number 4 then add 1 to it which makes it 2 now * it by D9 which is the number 384 and the answer is 768 now * that by K9 which is 6 and you get 4608 I'm getting 2310 using this formula... =IF( C9=0, 0, C9+1*D9)*K9.
Is there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if that’s what is in the other cells.
View 5 Replies View RelatedAttached worksheet which is an sales incentive plan. I need cell B69 to represent the amount in b68 unless neither b30 or b99 are > 0. In other words if even 1 of the cells b30 or b99 come back positive, you get the amount in b68. If it comes back 0 in both cells b30 and b99, then they get 0.
View 4 Replies View Relatedi need t oknow if i can have text added into 1 cell with having a formula with a answer in it as well,,,i have attached a sheet with better examples of what i mean.
View 3 Replies View RelatedI have the following letters in cells
D2= A
D3=G
D4 =L
These represent Accomodation,Groceries, and Liquor.
Starting at E12 I want a formula , to drag down the column, which will show either Accomodation, Groceries or Liquor depending on the letter I put in cell D12,
Eventually I will possibly need help to summarise these costs on another sheet with other data such as fuel costs and fuel analysis but this will get me started.
I have 6 rows (A-F) with dollar vallues. I am trying to create a formula on row G that will give me the highest dollar value out of rows A-F.
I’m looking for a formula that will give me a figure against the name in column A (name) while looking picking out a specific word within the column B, say "alarm"
So it reads
Alan Ingram 1
David walker 3
And so on...
I am trying to do something for a baseball game I am creating. What I am looking for is a formula for one cell that will basically give me a whole number when a certain criteria is met. I am also looking for this cell's formula to get part of it's formula from another cell in the document. So let's use cell A1 has 1.50 in it.
I want this other cells formula to be able to give me a 9 if A1 is 0.00-1.50, a 8 if A1 is 1.51-2.79, 7 if A1 is 2.80-4.30, a 6 if A1 is 4.31-5.49 and 5 if A1 is 5.50-500.00.
Is there a lookup formula that will give me multiple items? so in my example attachment i want to look up risk from section A to give me the item in section B, but for risk 7 for example it has multiple items (a,b,c), how would i get all them? even better would be if its possible to have in seperate cells
View 4 Replies View RelatedI'm trying to write a formula that searches for the name of the column on one sheet, finds that column on another, then results in the column letter. So, ideally, if the first three columns in the first tab were "Team," "Name," and "Total," respectively, I just want a formula to search for "Name" and give me back "B."
I want to do this in case anybody ever moves the "Name" column, for example, from column B to column C -- so then it would search for "Name" again and change the range in the formula to "C" because that's where that data lives now.
Currently, I'm using it for a COUNTIF() function that is a very simple: =countif(indirect("'"&$A2&"'!K:K"),$B2), where A2 is the sheet name. The latter half of $B2 is fine -- but I would love to have a more complicated formula take the place of the range "B:B" in case the "Name" column ever got moved.
i have =TIME(LEFT(F17,FIND("h",F17)-1),RIGHT(F17,2),0). which gives a time in the format 9:30PM, or 10:30AM etc. How would i change the formula to give me a time minus 15 mins. Eg, if the above formula gave me 8:45PM, i would want it to show 8:30PM
View 4 Replies View RelatedI know that I an probably asking for too much but I must get the formula some way. OK, I need a formula for this:
lets say I have 3 columns (A,B,C (search criteria). In each Column there is a DIFFERENT number. There is 3 more columns (D,E,F (used to compare).Each column has 3 Different numbers. If 3 numbers match between the two sets of 3 numbers I want Column G to display "CCC". IF 2 numbers match I want G to display "CCH". If 1 number is a match I want G to display "HHC". If none of the numbers match I want G to display "HHH".
I can manually do these but it will take waaaay toooooooooo much time to do. If you can do this for me it would be a great help indeed because I'm trying to do other states. With this formula I can use Automate to do a large quantity of numbers.
1. The example is cell B1 has a drop down list with the following options: MIN, MAX, AVERAGE, MEAN, SUM
The range F2:F20 hold the values upon which I want the formula to work
Cell B3 is to calculate the result of performing the the function defined in B1 over the data set in F2:F20
What formula do I need in B1. I have tried various of methods of forming the above into a text string and then preceding with INDIRECT but my problem seems to be with the range part.
2. Same as above but I want to the users to write as text (without equal sign) the formula they want to use
If the total is >= to x but =(I10*0.9),"Over 90% spent",IF((M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)>=(I10*0.8)&(M10+T10+AA10+AH10+AO10+AV10+BC10+BJ10)
View 3 Replies View RelatedI have a spreadsheet, but I need the following formula to make our lives easier here.
I have the following columns:
Rate, I/T/P/S, FT/PT
I need a formula that when I enter "I" for Infant it will give me the FT (full time) or PT (part time) rate. All the columns have drop down menus, so if I choose "I" under the ITPS column and then choose FT, I want the formula to be able to give me the full time rate which is 157.94
I need a formula to give me a MIN or MAX value only if there is a number greater than 0 in the cell AND not alphabetical letters (as some cells do contain). I need it to return the value for that cell across about ten sheets--I have that part figured out (I think). But I keep getting a #Ref error.
View 9 Replies View RelatedColumn P is the percentage of body weight lost...
P
-1.98%
-2.92%
-3.87%
-3.48%
0.00%
-0.10%
0.00%
-3.56%
-3.57%
What I need is a formula to look at all 9 data points and give the place number. Remember that the lowest number is actually in first place.
I have multiple sheets in excel file. Every sheet having same information for different areas. e.g. The bug was reported. One sheet might have answer in YES and other sheet might have No. I need to get answer YES if even one of sheet contains YES for the field.
View 9 Replies View Related