im looking to return an answer in cell c28. in b28 it will say "best goalkeeper"
in c28 i need a formula to look in range d2:d6 then return the highest answer and correspond that to whats in b2: b6. so we could say
(b2)shilton(d2) 33
(b3)corrigan (d3) 55
(b4)parkes (d4) 66
(b5)schmeichel (d5) 100
(b6)cudicini (d6) 14
in c28 it will return the answer schmeichel because he is the highest
and in d28 it would return the points he has.
in cell d1 i have
hk/q46559
in cell i1 i need to return whatever is before the "/"
in this case hk
and in cell i2 i need to return the number after the q
in this case 46559
I've been looking through past threads and I can't find what I need to do anywhere. There was one formula that came close: =SUMPRODUCT((A2:A100="Aimbry")*(B2:B100="LW")*(C2: C100)). but this adds up all the matching results.
What I need to do is match the info in columns A and B and return a number in column C. The problem is that there are multiple rows with identical entries and I just want to return one of them. So I was thinking a version of the above that produced a mode or average would give the desired result.
I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
I want to tell Excel that, if a cell value is between 1 and 100, to enter one result in another cell. If the value is between 101 and 250, enter another result in that same cell. If the value is between 251 and 500 enter another result in that same cell and so on about another 12 times.
View 5 Replies View RelatedI am trying to write an excel sheet that has multiple questions but need to be answered in order and the next question in the series answers should appear based on the answer to the previous question.
expample:
Question 1: Steel or Aluminum
Question 2: (If the answer was Aluminum) 3000psi or 3300psi
(If the answer was Steel) 2640psi or 3442psi or 3500psi
Question 3: If the answer to #2 was 3000psi: 50,63,80
If the answer to #2 was 3300psi: 100
If the answer to #2 was 2640psi: 66,85,95,98,104,112,125
If the answer to #2 was 3443psi: 80,100,120
If the answer to #2 was 3500psi: 65,80,100,120
I want the choices for the next question to be hidden before the previous question is answered and the choices based on the answer to the previous question. Would love to be able to use a drop down box to do this with.
I have 2 Combo boxes and I would like to do the following:
If Combo Box 1 = Answer A then populate Combo Box 2 with dynamic list "List A"
If Combo Box 1 = Answer B then populate Combo Box 2 with dynamic list "List B"
I am trying to get an IF Statement created based off a checkbox answer.
I have a cell reference C2 from Checkbox that is answer Y.
If "Y" I want to calculate *0.005+0,0.03),0)*C4.
I need to skip the 1st & 2nd quarter after C4 before the calcautaion starts.
Then continuing no greater than .03 till the date changes.
I have tried to rearange this formula every way I can think of to get it to work like I want it to.
a correct formula for me to get this to calculate?
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.
below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2
120%
12
>=2
130%
13
>=2
140%
[code].....
I am a newbie to Excel. I really appreciate if someone could help me here and this is very urgent as I have a project going on.
I have a cell say B3, which is a dropdown list I created using Data Validation. It only lists down Yes or No.
What I need is when you click on Yes in B3, i need columns C to I to unhide. If answer is No, column C to I should be hidden. By default, the columns will be hidden.
Can you please help? I tried many times but not successful. Appreciate if someone will be able to walk me through details. If you want to see the sample spreadsheet, I can sent it to you by email. I tried Data> Outline group but they are not happy with this.
I have a set of 4 multiple choice answers B,C,D,E column "F" lists a # 1-4 which lets you know which column letter (b,c,d,e) the correct answer is in. I want to set up a formula that will copy the contents of the correct answer (based on that # identifier) and copy it into column "A" which is currently blank.
View 7 Replies View RelatedHere's an example of what i want to do
A_________ B Frank Sinatra C Sammy Davis D Dean Martin E Joey Bishop F 3
I want to put "D"'s value 'Dean Martin' in column A - i know it belongs in A because the "3" in column F indicates its the 3rd answer listed i.e Dean Martin. This format would be the same where there are 4 possible answers on the column to the right dictates which answer is correct.
So I am creating a board game in excel. I currently have a draw card feature to draw random cards. I also have section above where you can fill in the answer to the question and another 2 sections that flip to correct or incorrect. Those formulas work as =IF(AND(Sheet1!J6="When resubmitting the claim to another insurance should you be voiding an adjustment to the S code if one is posted?",Sheet1!I2="Yes"),"That is Correct!"," "). I have another for if Sheet1!i2="no" then it flips to that is incorrect. I want an OR formula that will be like if multiple cells have any text in them it will display them but only one cell at a time. So essentially a way for multiple questions to be able to be drawn and you can answer those questions and be told if they are correct or not.
View 14 Replies View RelatedCan this Formula work? Where if c2<e5 then its value is a number. The formula below is what i tried but it didnt work
=IF((C2<E5);"c5=value=f5")
How I can get a picture to pop up when a certain answer is selected in a certain cell, or when a certain answer is keyed in to a cell. Another portion to this question is that we know how to get a message to pop up in a dialog box when a certain piece of information is typed in to a box, but we don't know how to get graphics into those dialog boxes.
View 3 Replies View RelatedI have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
Here is the qtn if two cells A1 and A2 has "ab 1" and "ab 2" the answers for comparing cells should be true as both cells has first 2 letters as alphabets then space followed by numeric..format of cells is same.
View 2 Replies View RelatedIs there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if that’s what is in the other cells.
View 5 Replies View RelatedI need an economical way to fill values in 12 cells.
I have a list of 50 cities in column A. For each city I need find and fill certain demographical values in columns, L2 through W50, consistent by looking up data in another sheet. Both sheets share the same column names.
I have tried =VLOOKUP(A2,'CitiesDemo'!$A$1:$W$51,11,FALSE) and it works well enough but I would like to drag across and down to avoid manually editing references.
Why than going line by line on a document that has 60k rows!
I have a document with NAMES in column A and ROLES in column I. If the user has more than one role..their name will be listed in "A" for each role in "I". I'm trying to purge down a file that has 60k + rows. Lets say i want to see all the people and all their roles if they are in "PROGRAMMER_ANALYST" role...can this be done by macros? or formula?
I have 2 worksheets (worksheet 2 is Slicing and Worksheet 1 is Production).
Production worksheet D6 has a dropdown box for, 1, 2, 3, 4, 5, 6, 7, 1.1, 2.2, 3.3, 4.4, 5.5, 6.6 and 7.7.
In the Production worksheet, I have in cell E6 =IF(D6=1,"ONE",IF(D6=2,"TWO",IF(D6=3,"THREE",IF(D6=4,"FOUR",IF(D6=5,"FIVE",IF(D6=6,"SIX",IF(D6=7,"SEVEN")))))))
In the Production worksheet, I have in cell F6 =IF(D6=1.1,"ONE",IF(D6=2.2,"TWO",IF(D6=3.3,"THREE",IF(D6=4.4,"FOUR",IF(D6=5.5,"FIVE",IF(D6=6.6,"SIX",IF(D6=7.7,"SEVEN")))))))
How do I show in Slicing worksheet cell B6, either 'ONE', 'TWO', 'THREE', 'FOUR', 'FIVE', 'SIX', 'SEVEN' as i have the formula =PRODUCTION!E6&PRODUCTION!F6 and the cell shows '
I'm trying to use IF function with multiple statements in Excel 2003. However, whenever I try I get the "The formula you typed contains an error message".
I've tried even copying and pasting the example provided in the very Excel help file:
=IF(A2>89,"A",IF(A2>79,"B", IF(A2>69,"C",IF(A2>59,"D","F")))) (without changing any value or symbol) in a blank worksheet but even so I get the same error message.
I've also tried by copying and pasting examples I've found in different web pages, but the result is the same.
However, there's no problem with single statement.
i need t oknow if i can have text added into 1 cell with having a formula with a answer in it as well,,,i have attached a sheet with better examples of what i mean.
View 3 Replies View Relatedi have a column of data part number part text e.g 7w1,8b1 in the next column i want to write a function that will look at the other and dependant on whats in it place a word e.g. for 8b1 i need it to look at the "b" and enter beauvale if theres no "b" but a "w" enter wollaton, i have tried an if function and used "*b*" but it doesnt seem to like wildcards ....
View 9 Replies View RelatedThis time I'm trying to use the max value and row value at the same time, but it won't let me. Here's what I'm trying to do...
A B C D
1 a b c d
2 7 9 4 2
3 e f g h
4 8 2 7 8
5 i j k l
6 4 3 3 9
I want Cell A7 to return the letter before the highest value in column A...
A7=e
B7=b
C7=g
D7=l
I tried to do something using two cells, but even then I couldn't figure it out.
I thought a ROW(MAX(A1:A6)) would give me the row and I could go from there, but that didn't work.
I don't even know if this is possible but can you use some formula within Excel to return a value to a cell based on the cell formatting of another cell? Here is specifically what I am trying to do:
Cell A2 has a value of 10. If the font color of that cell is black (or "automatic") I want a formula in cell A1 that will return a value of "+10". If the font color of cell A2 is red, I want the formula in cell A1 to return a value of "-10".
I'm trying to put in a formula that will populate a cell with either "Yes" or "No" depending on the date enterd in a different cell.
View 8 Replies View RelatedHow to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
Comma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
