4.0 Macro Warning On Open
Aug 26, 2008
I keep getting this warning. I temporarily used a 4.0 macro, but found a better way to do it, so I no longer am using that function. How do I remove whatever it is that is calling it so that user's don't have to see this message. There is a small probability that something else somewhere is calling a 4.0 command, but I have no idea how to find out what that is.
I've checked the references, and excel 4.0 Macro's aren't listed, and I'm pretty sure they were before when I was using them.
View 7 Replies
ADVERTISEMENT
Jul 8, 2014
I want open particular sheet in a workbook after showing warning Message .
View 5 Replies
View Related
Feb 7, 2008
I have recently grabbed the very helpful "Macro to delete VBA code" from this site, and it's working but with one small problem.
My worksheet runs a lot of code, then deletes all macro code and saves itself.
The problem is the next time i open I still get the macro security warning!
I've checked thoroughly and there is definatley no vba left anywhere.
If I open the document, enable macros, and save it, then open it again, I no longer get the warning.
View 9 Replies
View Related
Sep 6, 2007
I have an excel document which automatically runs a macro when it opens. The macro itself opens various excel documents, copies, Pastes and Deletes work sheets then saves the updated files in a new location. I simply used the Application. ScreenUpdating = False at the start of the macro and Application.ScreenUpdating = True at the end of the macro to hide all the various opening and closing and formatting of workbooks.
My aim is for the user to be able to open the document, wait a few moments while the macro runs, then be presented with the finished article when the macro ends without any need for interaction. The problem I am getting is as the macro runs, various windows pop up with messages such as "The file C:... already exists do you wish to replace the file" with a yes or no wchoice and "Data may exist in the sheet(s) selected for deletion. with a delete or cancel choice To Permanently delete the data press Delete". What I want to be able to do is stop these windows popping up and for the macro to go ahead with replacing the file or deleting the sheets without being manually told each time.
View 2 Replies
View Related
Apr 3, 2009
Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
View 14 Replies
View Related
Feb 13, 2010
I have created a template including a macro. It works as expected besides the issue that macros need to be enabled manually. This is totally annoying. I need to have it work directly.
Or what would be another way to have a macro available all the time I run Excel?
View 9 Replies
View Related
Dec 9, 2008
I have this macro that does text-to-columns based on delimiting with spaces.
It seems to work fine but the first time I use it when I open my spreadsheet it comes up with "Do you want to replace the contents of the destination cells?".The answer to this is always yes, is there a little bit of code I can poke into this macro to ignore this warning?
View 3 Replies
View Related
Jan 19, 2012
I'm writing a piece of code that puts certain values in certain cells based on certain criteria. (Vague, I know.)
When the code gets to the part where it puts the first value in the first cell (in a loop), it inserts the value and then the code stops running. Even when I put in "On Error Goto Err" with a msgbox that contains the error description, the code just quietly stops.
Here is a simple macro I wrote to see if maybe the problem had anything to do with something specific to my code. This one fails too, for no apparent reason. Could my file be corrupted or something? What do I do about this?
Code:
Sub rtest()
On Error GoTo err
Sheet2.Range("p4") = "test" 'code stops on first line, whether it is this one or the next every time.
ActiveCell.Value = "test"
ActiveCell.Value = "success"
End
err:
MsgBox err.Description
End Sub
View 9 Replies
View Related
Dec 29, 2011
I have written a macro to convert data from a report exported from Salesforce.com to a format that is acceptable for upload to our website. One of the necessary conversions is to convert values from a Boolean value to a Y/N value. I wrote a macro with a series of search-replace commands such as this:
Code:
'replace 0s and 1s in "Direct Billing" column with appropriate data
Columns("R:R").Select
Selection.Replace What:="0", Replacement:="N", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
This code generates a warning when no "0" values are found:
"Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet."
View 2 Replies
View Related
Oct 18, 2008
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies
View Related
Mar 25, 2014
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies
View Related
Sep 27, 2006
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
View 3 Replies
View Related
Jul 21, 2007
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
View 2 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Nov 17, 2006
I created folder on my desktop to hold various documents. I have master excel document which contains forms and command buttons that open documents from same folder. Is there a way to change code instead of having full file path to specify current directory. I'm worried that if I move this folder to another location then my open file button will not work since location is changed.
Also when I open with command button word document, I have a button on word document to close. I can close document but word application is still active. Can I close word application with the document at the sam time. This is the code I'm using: "ActiveWindow.Close"
View 3 Replies
View Related
Dec 8, 2009
I am trying to set up a macro that hides certain columns of data in an automated spreadsheet that I don't need. How do I make the macro that hides the columns apply to all spreadsheets that are open except for the one I am in?
View 9 Replies
View Related
Jul 20, 2003
Is it possible to use a macro to:
1. Open Excel from the Desktop
2. Open a workbook
3. Execute a macro from this workbook
If so, how can it be done, specially point 1?
View 9 Replies
View Related
May 28, 2007
I have a lot of links on my excel page, links going to videos. Everytime I click the link, I have this message :
"there might be viruses... are you sure you want to open this file?"
I know there must be a way to take this message off : I worked with it for months, and then it suddenly disappeared. But now that I formatted, it's back again
View 9 Replies
View Related
Aug 26, 2005
I have several material takeoff sheets and one material SummarySheet in my workbook.
Each material takeoff sheet has a subtotal cell at the bottom of the sheet. The subtotals are added together and the total sum is displayed in a cell on the SummarySheet. At least that is how it is supposed to work. Excel or somebody else arbitrarily changed the cell reference in the SummarySheet formula to call up the cell one row above the subtotal cell on the material takeoff sheets. This little action resulted in a loss of $674,000 and may eventually result in my unemployment. Meanwhile I am sitting here putting out fires.
This is what I would like to do: Place a formula on the SummarySheet or add a Macro that will trigger a warning message box if the total on the SummarySheet is not equal to the sum of the subtotals on the material takeoff sheets. Also would like to have the message box animated or brightly colored.
If(PlateCostsTotals+AppurtenancesCostsTotals+StructuralCostsTotals+MiscellaneousCostsTotalsSummaryCostsTotal MsgBox “Hey, Don’t You Know How to Add”) or an alternate formula that works.
View 9 Replies
View Related
Mar 22, 2007
I recently added some code to close a file after a few minutes of inactivity. (Here's the sub code)
Sub time_out()
If Timer - LastEventTime
View 9 Replies
View Related
Mar 30, 2007
I am trying to put together a code so that when a user enteres more then two decimal points in the cell value they should get a warning regardless if they formatted the cell to show 2 decimals or not...
Simply the problem is on the sheet I have a lot of people format the cell to show two decimals but when you copy and paste the cell values to other sheets the decimals are still there which causes problems.
I am intermediete in VBA so if someone can shoot me some example codes I think I can make it work on my sheet.
View 9 Replies
View Related
Aug 14, 2007
I have a plan to create an excel sheet DB of softwares I sold to clients. Each license lasts 1 year. Here's an example of my sheet: ...
View 9 Replies
View Related
Jun 6, 2008
On one laptop Excel crashes, without warning. It happens during copy/paste job (from one workbook to another). But not every time she copies something.
It is completly the same laptop like others in my company. My user has deadlines, and lot of copy/paste job.
View 8 Replies
View Related
Mar 3, 2009
I have an excel sheet there i am maintaining the details of our sales invoices. Invoice no is in the column D . My concern is while entering a new number in the column D, excel should look at the entire column and give an error message if the no is already exixting in the column.
View 9 Replies
View Related
Oct 24, 2007
I have an Excel file that contains macros that I made. Sometimes when I open the file I do not get prompted to enable macros. I DO want to get prompted so I can enable the macros. Any idea why this happens? By the way, my macro security is greyed out so I cannot change it.
View 3 Replies
View Related
Jul 28, 2014
Running a worksheet with vba, at the start of the code I turn warnings off and at the very end of the code I turn them back on.When the routines complete a warning is raised:
A formula in this worksheet contains one or more invalid references.
Verify that your formulas contain a valid path, workbook, range name, and cell reference.
When I run Error Checking everything comes up clean.
Clicking on "Show Formulas" shows no formulas for there are no formulas on the sheet to show, just a chart, and clicking "Show Formulas" just turns my dates into serial numbers and screws up the display of the two comboboxes, messing the fonts and drop-down arrows, and since closing and reopening didn't revert the comboboxes back to normal I will now have to blow them away and resurrect them. I also see Show Formulas also messed up my command buttons. nice...
The only way I find to avoid the error is to turn Warnings OFF at the start of the charting routine and NEVER turn it back on.
I made certain that none of my names had any errors in them. Everything looks proper. So what next?
I fear something will create an error for me now along the lines of Murphy's Law
View 2 Replies
View Related
Sep 14, 2009
Is there a way to make excel 2007 pop up a warning whenever calculation is set to manual by a macro or any other means? I have on several occasions noticed formulas not working, only to discover that calculation was set to manual without me noticing. And then I don't know how much of my work may have been afffected. This seems like a pretty vital piece of information, and I am surprised that it's not made more obvious.
View 11 Replies
View Related
Jan 29, 2014
I have a userform with a text box which asks for a Tag number which is then linked to a cell. Is it possible to show a warning dialogue box if a duplicate Tag number is entered?
how to set this up on a single cell also would like to see if code can be written for this?
View 14 Replies
View Related
Apr 2, 2009
I have a range of cells and I would like a warning message to pop up if a value over 0.1 is entered. I'm sure it is pretty easy to do, just can't find any info on here and I'm not great with Excel.
View 2 Replies
View Related
Jul 29, 2009
For instance: Sheets(sheets.count).delete. I delete the last sheet, but I dont want a message box warning. Can i disable that with vba code? (offcource I can, but how?)
View 2 Replies
View Related
