A Formula In This Workbook Contains One Or More Invalid References
Feb 29, 2008
I have a rather complicated workbook with many VBA formulas. When I close it down a window displays "A formula in this workbook contains one or more invalid references". verify that your workbook contains a valid path, workbook, range name, and cell reference.
This only happens when I close the workbook. I seem to have all functionality. How can I find the invalid reference.
View 9 Replies
ADVERTISEMENT
Feb 7, 2012
Everytime I save my workbook, I get a dialog box that says:
"A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a vlid path, workbook, range name, and cell reference."
First off, it say's "this" worksheet no matter what worksheet is active.
Usually the culprit is a screwed up name that has a #REF in it somewhere. Not this time. All of the formulas appear to be working fine.
Is there an audit feature that will find the errors for me? (Excel 2007)
View 3 Replies
View Related
Jul 28, 2014
Running a worksheet with vba, at the start of the code I turn warnings off and at the very end of the code I turn them back on.When the routines complete a warning is raised:
A formula in this worksheet contains one or more invalid references.
Verify that your formulas contain a valid path, workbook, range name, and cell reference.
When I run Error Checking everything comes up clean.
Clicking on "Show Formulas" shows no formulas for there are no formulas on the sheet to show, just a chart, and clicking "Show Formulas" just turns my dates into serial numbers and screws up the display of the two comboboxes, messing the fonts and drop-down arrows, and since closing and reopening didn't revert the comboboxes back to normal I will now have to blow them away and resurrect them. I also see Show Formulas also messed up my command buttons. nice...
The only way I find to avoid the error is to turn Warnings OFF at the start of the charting routine and NEVER turn it back on.
I made certain that none of my names had any errors in them. Everything looks proper. So what next?
I fear something will create an error for me now along the lines of Murphy's Law
View 2 Replies
View Related
Feb 25, 2014
I am combining the information from multiple files--one per state, for several states--into a single large table so it's more easily reviewed. Each file has multiple worksheets, named for categories. The category/worksheet names are standardized, but not all worksheets are found in every file.
There is some overlap of items from state to state, so my macro copies key fields from each worksheet and pastes them into the new table and adds a column on the left with the name of the category/worksheet each item came from. It then removes any duplicates to create a list of unique items. Across to the right, the table has two columns for each state, one to show if the item exists there, and the other the date it was added.
In the final step I am using lookup formulas to populate the states columns, using the category/worksheet name from the left-hand column to identify which worksheet to pull from. When a worksheet doesn't exist in a source file, however, this creates an invalid reference.
Is there any way to use VBA to identify which worksheets are in a file so I can use the results in an IF/THEN statement to bypass any lines that would create the invalid references?
View 2 Replies
View Related
May 24, 2007
Say cell C5 contains the name of a project (workbook). eg
C5 = "[Project1]"
In my current workbook, I want to find the value in cell B8 of Sheet1 of the project shown in C5. If I wrote this directly, it would be "='[Project]Sheet1'!B8"
But the name of the project is a variable shown in cell C5 (as explained above). So I need a formula that will find the value in cell B8 of sheet1 of the project shown in C5.
View 7 Replies
View Related
Jan 17, 2005
I'm getting the following error:
"Object library invalid or contains references to object definitions that could not be found"
I wasn't getting that error last night and I'm not sure what I may have done to cause this error.
It seems to be cause by code running on one sheet of my workbook, but I'm not really sure about that. I'm still a bit of a novice at VBA.
I'm using Excel 2002 SP3 and I'm running MS XP Home as my OS.
Do you have any ideas what can cause this error and/or how to trace down the offending objects/code?
View 9 Replies
View Related
Sep 17, 2012
I have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
View 3 Replies
View Related
May 31, 2013
I'd prefer to edit links with the source workbook open, however I receive this error when I do "A formula in this worksheet contains one or more invalid references." I am able to edit links with the source workbook closed but this takes far too much time to be satisfied with that as the solution. I have used vlookup formulas and the index-match method and they both take about the same amount of time to update. I've separated each worksheet and used the "name manager" add-in and have searched all links for any type of error. I feel like I'm missing something. Is there a way to fix this "invalid reference" error so that I can edit my links with the source workbook open?
View 1 Replies
View Related
Sep 25, 2012
I have two columns with values, and want to display "Valid" or "Invalid" in a third column, dependant on the two preceeding values.
If both column 1 and column 2 contain #N/A, then I want the third column to display "Invalid".
If the above is not true, then I want the third column to display "Valid".
I've been trying different syntax with IF/AND but cannot achieve the result.
View 5 Replies
View Related
Aug 11, 2008
I'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).
I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.
Project Name - Valid/Invalid is B2-N2
View 19 Replies
View Related
Jul 7, 2007
In trying to construct a Vlookup formula that references a table in another workbook, I find that when I double click on the tab in the source workbook to insert the name, and then complete the formula with the column reference and a False statement, I keep getting an “Invalid” statement in the fx wizard when I try to solve this problem. By entering the name range by typing, I get a “#NAME?” error when I go to the wizard to see what I’ve done wrong.
This issue was addressed in the link that I searched for in the old help files and submit in this question. It seems that the issue was never resolved in that posting and I can’t figure out how to resolve this matter.
View 9 Replies
View Related
Jan 8, 2009
I have many files that has a filepath references in the cell values, for example:
='\serverfolder1subfolder2[Filename.xls]Sheet'!$B$82
Is there a way to change all the references to direct to another place?
Filenames don't change, only the '\serverfolder1subfolder2 path
View 9 Replies
View Related
Dec 22, 2009
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
View 9 Replies
View Related
Oct 7, 2013
Within one workbook I have 15 sheets, 13 are for separate divisions within the company, 2 are used to present sums across the 13 sheets. All 13 sheets have identical columns and rows, with unique numbers in each cell. Right now I am manually selecting the cells to reference in my master sheet, =sheet name!cell+sheetname!cell+sheetname!cell - so and and so on. How can I reference the sheet name once, and then all of the cells to SUM? =sheetname!(c4+c14+c24+c34) etc?
This would let me be able to copy the formula from cell to cell, and only have to change the sheet name each time.
View 3 Replies
View Related
Oct 8, 2009
In Excel 2007 I am creating a macro with the "relative references" setting turned on. I want to repeat some tasks like: go to column A, sort, hide columns B thru F, hide columns H & I, return to column A.
Every time I try to create this macro by capturing key strokes, it inserts the workbook / worksheet name in the macro! Kinda defeats the ability to use it in any other workbook.
I am recording the macro in the PERSONAL.XLSX workbook. I have other macros that successfully perform in any workbook they are used in . . . but today I can't create one that doesn't incorporate the name of the original sheet it was recorded in.
View 12 Replies
View Related
Oct 25, 2007
I have a workbook within which i have a worksheet that contains a lots of macro code (coded by me). As the workbook gets used by various people, i need to copy the worksheet and the macros across to the updated workbook, which doesnt contain the macro worksheet at all.
I have tried to copy it across by clicking on its tab and using the move or copy facility. This copies the sheet across as required. But for some reason, the macros all reference the old workbook. A small bit here for example for some reason opens up the old workbook and then performs the code in the old worksheet:
Sub SelectAll()
For i = 12 To 20
Set curcell = Worksheets("Form Generator").Cells(i, 3)
If curcell = False Then
Cells(i, 3).Value = True
End If
Next i
End Sub
As curcell is equal to worksheets...() i would have expected it to use the local worksheet, ie the one that the macro is attached to. So why is excel proactively hunting out the old workbook and sheet? is the method i used to copy across the sheet with the macros incorrect? If so, how should i go about it?
View 3 Replies
View Related
Feb 23, 2008
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
View 9 Replies
View Related
Jan 7, 2013
Need to create Working order (in Excel 2007) for filling machine in my factory. Working order is changeable from day to day and the deference is product quantity. Product quantity in working order [File - Working order] is changing according to the each sales plan [7-Jan-13, 8-Jan-13] - (File Working order is Linked to the appropriate sales plan in this case - [7-Jan-13]).
Anyway, I need to change the source workbook "sales plan" from [7-Jan-13] to [8-Jan-13] by changing source workbook name in red cell [File - Working order] and not to browsing location?
All source workbooks [sales plan 7-Jan-13, 8-Jan-13]are at the same location in the same folder, only difference is the source workbook names. So, is it possible to change source workbook name (File - Working order - red cell) for all external references (File - Working order - green cells) at the same time, and avoid annoying browsing?
View 14 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Dec 20, 2013
Column O is names and column P autogenerates email addresses with
=CONCATENATE(SUBSTITUTE(O2," ","."),"@company.com; ")
So, John Smith becomes
"john.smith@company.com; "
That's perfect. I want to move it to another worksheet. When I paste it to Worksheet 2, A1 I get
=CONCATENATE(SUBSTITUTE(Sheet1!O2," ","."),"@company.com; ")
So why does that only generate "@company.com; "?
View 4 Replies
View Related
Mar 1, 2009
Is it possible to make a back-reference in a cell formula similar to regular expressions?
Example:
=IF(I15=FALSE, [H17 * INDEX(Percentages,I17+1)], IF(A17="", $1, 0))
...where [ ] indicates the actual reference and $1 indicates the reference number
View 9 Replies
View Related
Mar 4, 2010
I have a worksheet that will be referencing data from a 2nd open workbook.
Although the 2nd workbook will contain common worksheet names (eg stats), the file name will be volatile.
Consider the formula in wb ws1 cell A1 used to copy a value from wb2 (39961(28-May-09).xls) ws1 (stats) cell B1 if workbook 2's name was static.
='[39961(28-May-09).xls]Stats'!$B$1
In my case, the reference file will always be different and must be substituted in the forumla above (red portion). How can I adapt my formulae recognize the available workbook. I have the file name available now in cell C4 of WB1.
View 9 Replies
View Related
Mar 13, 2009
I have a spreadsheet that imports data from a database and into pivot. Several departments use that spreadsheet, but depending on the department, they may want to see e.g. 3, 4 or 5 different fields than other departments.
My spreadsheet also includes a great number of formulas included in a macro, so whenever I get a request to include field X, Y and Z, I end up spending a lot of time adjustning all my formulas to reference the new fields.
View 3 Replies
View Related
Aug 8, 2007
I am trying to code the following in VBA. Excel Cells have formulae like: '=+BZ165-BZ163-BZ162-BZ160-BZ159-BZ157-BZ153'. Now I want to write code in VBA which will be able to give me the individual cells referenced in this formula: BZ165, BZ163 etc. These names can be stored in individual variables or arrays.
I will then use these for further processing. Note in cases where formula refers to data in another sheet like: '=Projects!P49' or data in another excel like '='C:Documents and SettingshoskopDesktop[Annual.xls]Quarterly'!BA$502': I would like to store the path , file name and sheetname in variables/arrays as well.
Any pointers as to how I should approach this problem?
View 7 Replies
View Related
Oct 16, 2007
I want to sum A2 to B10. The catch is: I have the letter "A" in cell A1, the number "2" in cell B1, the letter "B" in cell C1, and the number "10" in cell D1. In effect, I want to make a function =SUM("A1B1":"C1D1") such that it gives me =SUM(A2:B10). Hopefully, the answer will work for any function (e.g. SUMIF, COUNT, VLOOKUP, etc).
View 4 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Mar 5, 2009
I have a sheet which needs to look up one reference and then fill a table with the rest of them.
EG:
Cell A1 contains '0091 911'!$E$2 (cell E2 contains value 100)
Cell A2 contains =indirect(A1) and displays value 100
I need a formula which will auto fill the remaining cells in the table.
eg:
Cell A3 fills to contain '0091 911'!$E$3 (row +1)
Cell B2 fills to contain '0091 911'!$F$2 (column +1)
so it needs to fill the Indirect reference and not =indirect(A1),=indirect(A2)....
View 14 Replies
View Related
Mar 12, 2009
I am running a research experiment in triplicate. Upon generation of data for all three, I create an averaged value of the three. I then take this value and do more calculations with it on a separate sheet. I wanted to know if there was a way in which I could quickly generate formulas based on a changing reference cell.
Example Data:
V1A 28
V2A 26
v3A 30
AvA 28
V1B 20
V2B 22
V3B 18
AvB 20
Vxy represents the value of y sample, x triplicate. V1A being sample A, first triplicate. AvX is the average of the three values.
I want to be able to generate a formula that references AvA which can be applied to the cell immediately below to reference AvB. A simple example would be to square the average.
View 3 Replies
View Related
May 13, 2009
For example things like "=1+A1" or "=A1*B1"
Right now it changes the cells even with Paste Special!
View 8 Replies
View Related