Activate Corresponding Cell With Sheet Change
Feb 18, 2008
I have workbook with two sheets "Path A" and "Path B". Whenever I activate worksheet "Path B", I want to activate the cell in "Path B " which was the active cell in sheet "path A". For example, if cell R1 was active in path A when Path B was activated, R1 should be made the activecell of Path B. Tried the follwing code... not working.
Private Sub Worksheet_Activate()
Dim r As Integer, c As Integer
r = Worksheets("Path A").ActiveCell.Row
c = Worksheets("Path A").ActiveCell.Column
Worksheets("PathB").Cells(r, c).Activate
End Sub
View 9 Replies
ADVERTISEMENT
Jan 6, 2014
When I select a specific sheet I would like cell A1 to be selected using VBA.
View 2 Replies
View Related
Jul 28, 2008
I was wondering if there is a way to enable a button when a cell is filled in. the button is disable by default.
View 9 Replies
View Related
Apr 21, 2013
I want to activate the sheet based on my cell value but the prog is not working.
Sub emptest()
Dim tempname As String
Worksheets("team").Select
Range("c24").Select
Do While ActiveCell.Value ""
If ActiveCell.Value = tempname Then
Worksheets(tempname).Select
Else
MsgBox "no sheet"
End If
ActiveCell.Offset(1, 0).Select
Loop
End Sub
View 4 Replies
View Related
Aug 15, 2008
I have an index page with hundreds of worksheets (poor spreadsheet design i know) I am looking for a button to go next to the sheet name on the index sheet, read the cell in the button's macro code and when pushed go to that sheet's location. I can easily make a button to go to one sheet but with hundreds of sheets this becomes a monotonous task. Example
Index Sheet
Sheet 2 (Button) <-- Button reads the text, takes you to the "Sheet 2" location
Sheet 3 (Button)
Sheet 4 (Button
Sheet 5 (Button)
View 5 Replies
View Related
Jun 10, 2008
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
View 2 Replies
View Related
Oct 21, 2011
I am having some difficulty working out how to activate the SelectionChange command if the user changes a cell in a particular column. Based on the fact that the column number may change the constant in this column will be that on row 7 the name will be "Fund Size".
Therefore my question is how do I get VBA to run my code if a user changes a cell in the "Fund Size" column...and underneath the "Fund Size" header (i.e. row 8 or greater).
View 2 Replies
View Related
Jul 4, 2009
I want macro2 to activate whenever there is a change in Range(C25:C5000). I want macro2 to activate only once even if there are 10 changes to the cells within this range. I tried the code below but it does not work.
Private Sub Worksheet_Calculate()
If ActiveCell.Row > 25 And ActiveCell.Row < 5000 And ActiveCell.Column = 3 Then
macro2
End If
End Sub
View 9 Replies
View Related
Jul 21, 2009
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
View 9 Replies
View Related
Apr 14, 2009
Every day for each date of month I have to copy data from mails to my workbook and a last sheet named report in which I need last row value from 7 or 8 sheets for this I have developed following codes which seems to me very long procduer.
Code: ....
View 9 Replies
View Related
Jan 26, 2010
On a command button in a userform, I have this code to open another workbook:
View 2 Replies
View Related
Dec 6, 2008
I am trying to create an event macro that would deactivate column and row headers when the workbook is launched and activate a sheet. i am not managing to do this,
View 2 Replies
View Related
Aug 18, 2006
I have a button on a sheet which needs to remain protected.
However, the button code does not activate when the sheet is protected...
Any hints on how to "unprotect" just the button?
View 9 Replies
View Related
Jan 14, 2008
I have created a Group Box in Excel with 4 Option Buttons in the group. I have also created a Command Button which currently, when clicked, changes to a worksheet I specified. I am trying to have the Comand Button, when clicked, look at the selected Option Buttons in the Group Box and change to the worksheet specified by the selected Option Button. I have tried an IF..THEN statement with no success. code below that I have tried.
Private Sub CommandButton1_Click()
If AM40 = 1 Then
Sheets("Billboards(1)").Select
'ElseIf AM40 = 2 Then
' Sheets("Live Events Feedback(1)").Select
End If
End Sub
View 3 Replies
View Related
May 17, 2008
Automatically Change Sheet Tab Name With Cell is listed below for convenience
$A$2 contains a formula...the code doesnt work on a formula. if i overwrite the formula, THEN the code works and the sheet tab is named to whatever i type in the cell
but how do i make it work with a formula? ...
View 9 Replies
View Related
Sep 30, 2008
I need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies
View Related
Apr 8, 2014
If the user enters a numeric value in Range ("B" & Rows.Count).End(xlUp).Offset(1), I need the code to copy the formulas in Range ("A12,C12:V12") to Offset row If there is no user entry in Range ("B" & Rows.Count).End(xlUp).Offset(1) then nothing should happen.
This should be monitored in sheet at all times.
I`ve done som research and think the code must be entered as a Private Sub Worksheet_SelectionChange(ByVal Target As Range) sub?
View 13 Replies
View Related
Oct 1, 2013
I am working on a Workbook for my wife to use at school. It's basically a grade-book that automatically fills out the report card for each kid. In column A I have a list of each student's name. I also have those hyper-linked to each sheet for easy access.
I would like to be able to change the names in column A on Sheet 1 and it also change the names on the corresponding sheet it is hyper-linked to. I have seem some similar post but I can't seem to get any of those formulas to work. I get an invalid sheet name error. Maybe I'm not inserting the code properly or it has something to do with my hyperlinks. This is driving me crazy not being able to figure this out. I just want to make it as simple and easy for her to use year to year.
View 6 Replies
View Related
Jun 21, 2012
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
View 2 Replies
View Related
Mar 23, 2007
I can't use code for this problem as I need to give this to someone who doesn't know VBA. They will need to use it in several different reports, so I can't produce something in VBA very easily. I have three worksheets, Summary, Year1 and Year2.
I want to display either Year1 or Year2 data in the Summary sheet depending on what the user enters in a cell in the Summary sheet. For example, if the user enters "Year1" in cell E2 then I want to point to a cell in the Year1 spreadsheet.
I tried using formula: =E2 & "!B3" but this doesn't work. Is there another solution? I have attached an example.
View 6 Replies
View Related
Mar 4, 2014
Basically, I'd like my macro to be activated whenever the value in cell A4 changes. Cell A4 has a numerical value between 1 and 10. The macro clears a contents table. Here it is:
Sub Clear()
Sheets('Form').Select
Range("H4:L10").Select
Selection.ClearContents
End Sub
How to get the (module) macro to be activated whenever cell A4 changes value?
View 2 Replies
View Related
Oct 27, 2008
I have code that calls a dataform when I click on a command button. Regardless of where I am in the row, the command button is in column A. I want the selected cell to move to column B in the same row so that when the userform displays it will show the correct data. (I have used
Private Sub UserForm_Initialize()
Container.Value = ActiveCell.Value
PONumbers.Value = ActiveCell.Offset(0, -1).Value
SizeType.Value = ActiveCell.Offset(0, 1).Value
Vessel.Value = ActiveCell.Offset(0, 2).Value
'etc
End Sub
to populate my userform.
Can I add something in my call code to also select the cell I want? Or alter the initialization code to start at the beginning of that row?
View 9 Replies
View Related
Oct 30, 2008
I have an excel file that I want a macro to run when the cell changes to "Yes" (location B21). The cell options right now in a drop down list is "Yes" or "No". The Macro is called helper. How do I get this to work when they pick yes or no from the drop down list. I wanted to attach the file in this post, but it will not let me. I can email it to anyone who would like to work on it.
View 9 Replies
View Related
Dec 1, 2009
i'm trying to combine vlookup and activecell here.
based on value that the user enter it'll activate the first cell on the row.
example:
a1:id
a2:1
a3:2
a4:3
b1:name
b2:josh
b3:alex
b4:ray
the user will input the id, and using vlookup i want to find the id and set the first column as an activecell. So for example the user input is 3, i want a3 to be the activecell.
View 9 Replies
View Related
Dec 4, 2006
What code can one use to Activate a worksheet on a workbook by using a Cell value on a worksheet.
View 4 Replies
View Related
Nov 28, 2007
I am trying to activate a window and the name of the window to be in a cell. lets say: Windows(file2.xls).Active
I want something like this: The name of the file is in B2 cell in tab Sheet1 in file file1.xls so the line will be like:
Windows(.............).Active
i do not know what function to use.
View 7 Replies
View Related
Aug 13, 2012
I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.
Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.
The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.
The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.
What I have tried already:
1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model
EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address
EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)
A solution to add to the existing "on change" event macro that identifies the last edited cell
View 8 Replies
View Related
May 11, 2009
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
View 2 Replies
View Related
Oct 9, 2009
I have a master workbook that is referencing data from several other workbooks whose file names are based on the years data was taken. In the master work book on any given sheet, I would like to be able change the data being used in the formula calculations by simply changing the year value in a single cell. By changing the date value, the formulas are directed from one data workbook to another.
e.g. in the master workbook in Sheet1, if you enter 2008 into cell A1, all of the formulas in Sheet1 now pull values from 2008.xls; if 2008 was replaced with 2009 in cell A1 on Sheet1 of the master workbook, then all of the formulas on Sheet1 would now pull values from 2009.xls.As I am completely new to VBA (bought my first book last night), I am looking for any help that is out there. I am not entirely new to programming (used C++ to write numerical simulations) but I have zero experience writing macros and the like.
View 13 Replies
View Related
Feb 10, 2013
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
View 7 Replies
View Related
