Automatically Change Sheet Tab Name With Cell is listed below for convenience
$A$2 contains a formula...the code doesnt work on a formula. if i overwrite the formula, THEN the code works and the sheet tab is named to whatever i type in the cell
but how do i make it work with a formula? ...
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies View RelatedIf the user enters a numeric value in Range ("B" & Rows.Count).End(xlUp).Offset(1), I need the code to copy the formulas in Range ("A12,C12:V12") to Offset row If there is no user entry in Range ("B" & Rows.Count).End(xlUp).Offset(1) then nothing should happen.
This should be monitored in sheet at all times.
I`ve done som research and think the code must be entered as a Private Sub Worksheet_SelectionChange(ByVal Target As Range) sub?
I am working on a Workbook for my wife to use at school. It's basically a grade-book that automatically fills out the report card for each kid. In column A I have a list of each student's name. I also have those hyper-linked to each sheet for easy access.
I would like to be able to change the names in column A on Sheet 1 and it also change the names on the corresponding sheet it is hyper-linked to. I have seem some similar post but I can't seem to get any of those formulas to work. I get an invalid sheet name error. Maybe I'm not inserting the code properly or it has something to do with my hyperlinks. This is driving me crazy not being able to figure this out. I just want to make it as simple and easy for her to use year to year.
When I select a specific sheet I would like cell A1 to be selected using VBA.
View 2 Replies View RelatedI have workbook with two sheets "Path A" and "Path B". Whenever I activate worksheet "Path B", I want to activate the cell in "Path B " which was the active cell in sheet "path A". For example, if cell R1 was active in path A when Path B was activated, R1 should be made the activecell of Path B. Tried the follwing code... not working.
Private Sub Worksheet_Activate()
Dim r As Integer, c As Integer
r = Worksheets("Path A").ActiveCell.Row
c = Worksheets("Path A").ActiveCell.Column
Worksheets("PathB").Cells(r, c).Activate
End Sub
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
I can't use code for this problem as I need to give this to someone who doesn't know VBA. They will need to use it in several different reports, so I can't produce something in VBA very easily. I have three worksheets, Summary, Year1 and Year2.
I want to display either Year1 or Year2 data in the Summary sheet depending on what the user enters in a cell in the Summary sheet. For example, if the user enters "Year1" in cell E2 then I want to point to a cell in the Year1 spreadsheet.
I tried using formula: =E2 & "!B3" but this doesn't work. Is there another solution? I have attached an example.
I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.
Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.
The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.
The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.
What I have tried already:
1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model
EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address
EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)
A solution to add to the existing "on change" event macro that identifies the last edited cell
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
View 2 Replies View RelatedI have a master workbook that is referencing data from several other workbooks whose file names are based on the years data was taken. In the master work book on any given sheet, I would like to be able change the data being used in the formula calculations by simply changing the year value in a single cell. By changing the date value, the formulas are directed from one data workbook to another.
e.g. in the master workbook in Sheet1, if you enter 2008 into cell A1, all of the formulas in Sheet1 now pull values from 2008.xls; if 2008 was replaced with 2009 in cell A1 on Sheet1 of the master workbook, then all of the formulas on Sheet1 would now pull values from 2009.xls.As I am completely new to VBA (bought my first book last night), I am looking for any help that is out there. I am not entirely new to programming (used C++ to write numerical simulations) but I have zero experience writing macros and the like.
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I have this code on my sheet1:
VB:
Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range
Set KeyCells = Range("K:K")
If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then
If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then
ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value)
End If
End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedI have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
First off I have an excel sheet that I have split into two windows. excel sheet.jpg
I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
View 4 Replies View RelatedSub OptionButton222_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = False
End With
End Sub
Sub OptionButton223_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = True
End With
End Sub
Sub OptionButton224_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = True
.Shapes("Notch 2").Visible = False
End With
End Sub
i need to modify it so that a selection on the beam input page causes the images to change on the beam output page. Currently this code is in the module section of VBA.
How do i change the below code to not reference a named sheet but the active sheet.
In case you need it i'm trying to sort columns A:CQ on row 2 smallest to largest from left to right.
Code:
Sub Sort_Left_Right()
' Sort_Left_Right Macro
Columns("A:CQ").Select
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:CQ2") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code ..........
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I am trying to update my sheet name based on a reference to cell a27 in the worksheet. Only thing is I don't want it to affect all tabs, just those in between my bookends aptly named first and last. I have tried working this on my own, stringing bits of already existing macros in my book, but as I am a novice (that's being generous) it is clearly not working. Can someone take a look below and advise where I am going wrong?
View 8 Replies View RelatedI am copying sheets using sheet().copy and when I do so I want to change both names of the sheet, "sheet10 (name)". At the momemnt I know only how to rename (name).
I.e. both "Name" and "(Name)" in each sheets propertes.
I have got a workbook with about 200 sheets... Sheet1 > Sheet200
i need to delete about 100 sheets... sheet100 > sheet200
i then need to add the sheets back in but when i do the sheet numbers start from Sheet201... how do i get it to start from Sheet101 again or can i use some vba to change them later?